scholarly journals Optimization on Spot Weld Parameters in Resistance Spot Welding Process on AISI 304

2021 ◽  
Vol 11 (3) ◽  
pp. 181-185
Author(s):  
Amit Hazari ◽  
Rith Saha ◽  
Bidisha Ghosh ◽  
Debraj Sengupta ◽  
Sayan Sarkar ◽  
...  
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Electrical Current ◽  
Industrial Applications ◽  
Spot Weld ◽  
Welding Parameters ◽  
Resistance Spot ◽  
Weld Time

The spot welding procedure is used in a variety of industrial applications. The most critical elements influencing welding quality, productivity, and cost are the spot welding parameters. This research examines the effect of welding factors such as welding current and welding time on the strength of various welding joint designs. Resistance spot welding (RSW) is used in the automotive industry for manufacturing. This research focused on the optimization of process parameters for resistance spot welding (RSW), as well as the tensile testing and spot weld diameter. The goals of this analysis are to comprehend the physics of the process and to demonstrate the effect of electrical current, weld time, and material type on the resistance spot welding process.

scholarly journals Experimental Study of Spot Weld Parameters in Resistance Spot Welding Process

2020 ◽  
Vol 22 (1) ◽  
pp. 179-186 ◽  
Author(s):  
Lebbal Habib ◽  
Reffas S. Ahmed ◽  
Berrekia Habib ◽  
Mario Guagliano
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Electrical Current ◽  
Tensile Tests ◽  
Spot Weld ◽  
Resistance Spot ◽  
Sequential Control ◽  
Weld Time ◽  
Weld Parameters

AbstractResistance spot welding is a comparatively clean and efficient welding process that is widely used in sheet metal joining. This process involves electrical, thermal and mechanical interactions. Resistance spot welding primarily takes place by localized melting at the interface of the sheets followed by its quick solidification under sequential control of water cooled electrode pressure and flow of required electric current for certain duration. In this experimental work the tensile tests and the spot weld diameter were studied. The objectives of this analysis is to understand the physics of the process and to show the influence of the electrical current, weld time and the type material in resistance spot welding process.

scholarly journals Connection Status Research of the Resistance Spot Welding Joint Based on a Rectangular Terminal Electrode

Metals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 659
Author(s):  
Xiaoqi Zhang ◽  
Lingbo Wei ◽  
Guocheng Xu ◽  
Chunsheng Wang
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Process Analysis ◽  
Welding Process ◽  
Welding Current ◽  
Welding Parameters ◽  
Current Time ◽  
Axis Direction ◽  
Resistance Spot ◽  
Welding Pressure

Rectangular terminal electrode is adopted in this research to conduct a resistance spot welding (RSW) process on stainless steel plate. The connection status of RSW joints under different welding current, time, and pressure were studied, and revealed how the rectangular terminal electrode shape and its dimensions influence the RSW joint dimensions. The process analysis results showed that the RSW nuggets welded with rectangular terminal electrode are normally elliptical in shape, and the dimensions of the long axis direction and the short axis direction have a certain proportion. As the welding current increases, the nuggets dimensions in long direction increase first and then decrease, and the internal grain structure also varies. As the welding time increases, the nugget size in long direction increase first and then steady and rarely splash occurs. As the welding pressure increase, the nugget dimensions in long direction increase first and then decrease, and the splash easily occurs under large welding pressure. However, when the welding pressure is too small, the unique adjacent double fusion nugget formed. By adopting proper welding parameters, the nugget size and quality can be controlled. This provides an important basis for the application of rectangular terminal electrode in RSW welding process.

The Influence of Welding Parameters on Effected the Complete for Resistance Spot Welding on Mild Steel

2011 ◽  
Vol 214 ◽  
pp. 113-117 ◽  
Author(s):  
Prachya Peasura
Keyword(s):  
Mild Steel ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Welding Parameters ◽  
Welding Time ◽  
Tensile Shear ◽  
Resistance Spot ◽  
Electrode Force

This research was study the effect of resistance spot welding process on physical properties. The specimen was mild steel sheet metal. The experiments with full factorial design. The factors used in this study are welding current, welding time and electrode force. The welded specimens were tested by tensile shear testing according to JIS Z 3136: 1999 and macro structure testing according to JIS Z 3139: 1978. The result showed that both of welding current, welding time and electrode force had interaction on tensile shear and nugget size at 95% confidential (P value < 0.05). Factors affecting the tensile shear and nugget size are the most welding current 10,000 amp., welding time 10 cycle and electrode force 1 kN. were tensile shear 7.13 kN. and nugget size maximum 6.75 mm. This research can bring information to the foundation in choosing the appropriate parameters to resistance spot welding process.

scholarly journals Short-Pulse Resistance Spot Welding of Aluminum Alloy 6016-T4 - Part 1

2021 ◽  
Vol 100 (01) ◽  
pp. 41-51
Author(s):  
ERIC SCHULZ ◽  
◽  
MATTHIAS WAGNER ◽  
HOLGER SCHUBERT ◽  
WENQI ZHANG ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Short Pulse ◽  
Welding Process ◽  
Welding Current ◽  
Welding Parameters ◽  
Resistance Spot ◽  
Pull Out ◽  
Welding Processes

Short-pulse welding parameters for resistance spot welding (RSW) of aluminum alloy AA6016-T4 using mediumfrequency direct current (MFDC) systems were developed to reduce the heat input required for nugget formation. Optimization of current and time parameters is critical during RSW of aluminum alloys for reducing energy requirements and avoiding weld imperfections, such as solidification cracking and expulsion, while maintaining weld quality, particularly given the high electrical and thermal conductivities of the materials. The welding time and the applied current level of the current pulse were varied systematically for thin sheets (1 mm or 0.04 in.) of AA6016-T4. The quality of the welds was evaluated by pull-out testing, ultrasound testing, and metallography techniques. Simulations of the same welding processes were performed with the finite element-based SORPAS® software. The results showed short-pulse MFDC RSW can reduce the energy required for sound welds in this alloy without requiring an increase in welding current. The simulations and experiments also showed the welding process had distinct weld nugget nucleation and growth phases.

Micro Hardness in the Welded Area at Resistance Spot Welding

2016 ◽  
Vol 1138 ◽  
pp. 153-158
Author(s):  
Mihai Boca ◽  
Gheorghe Nagit ◽  
Laurenţiu Slătineanu
Keyword(s):  
Mechanical Properties ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Graphical Representation ◽  
Welding Process ◽  
Electrical Current ◽  
Micro Hardness ◽  
Current Time ◽  
Resistance Spot ◽  
Welding Spot

The resistance spot welding process represents the welding technology used to obtain assemblies trough welded spots characterized by adequate mechanical properties. This assembly process is used mainly into the automotive, petroleum and naval industries. It is applied due to the significant advantages concerning the technology and service properties of the obtained assembly. This paper purposes a study concerning the micro hardness change of an assembly made by resistance welding spot. The entire process of plastic deformations together with the solidification step developed in the presence of the heat generated during welding process determines the mechanical characteristics of the welded spot and, of course, of the assembly obtained. In such conditions, depending on the changes developed during the welding process, the micro hardness of the welded spot varies between the fusion area (FA) and heat affected zone (HAZ). In this way, the graphical representation of the micro hardness repartition gives clues about the weakness areas which don’t correspond to the requirements. As input factors, in this study, the values of current intensity, the electrical current time and the force pressure were considered. In order to solve the proposed problem and to graphically highlight the variation of the micro hardness obtained for welded points, it was used a classical welding device and a micro hardness device analyzer. The graphical representation shows that the micro-hardness and, as a consequence, some mechanical properties changes in the specified region and in the entire mass of the welded spot changes. In this way, the structure of welded spot is characterized by a variation of the hardness in the interest areas.

A Comparative Study of AC and MFDC Resistance Spot Welding

2004 ◽  
Author(s):  
Wei Li ◽  
Daniel Cerjanec
Keyword(s):  
Comparative Study ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Median Frequency ◽  
Resistance Spot ◽  
Secondary Voltage ◽  
Nugget Growth ◽  
Welding Processes

This paper presents a comparative study of the AC and MFDC resistance spot welding process. Two identical welders were used; one with a single phase AC and the other with a median frequency DC weld control. Both welders were instrumented such that the primary and secondary voltage and current could be collected. A nugget growth experiment was conducted to compare the weld size and energy consumption in the AC and MFDC welding processes. It is found that the MFDC process generally produces larger welds with the same welding current. However, this difference is more prominent when the welding current is low. Overall the AC welding process consumes more energy to make a same size weld. The larger the welding current is used, the less efficient the AC process becomes.

Effect of Resistance Spot Welding Parameters on the Austenitic Stainless Steel 304 Grade by Using 23 Factorial Design

2011 ◽  
Vol 216 ◽  
pp. 666-670 ◽  
Author(s):  
Prachya Peasura
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Welding Time ◽  
Tensile Shear ◽  
Resistance Spot ◽  
Electrode Force

This research was study the effect of resistance spot welding process on physical properties. The specimen was austenitic stainless steel sheet of 1 mm. The experiments with 23 factorial design. The factors used in this study are welding current at 8,000 and 12,000 Amp, welding time at 8 and 12 cycle and electrode force were set at 1.5 and 2.5 kN. The welded specimens were tested by tensile shear testing according to JIS Z 3136: 1999 and macro structure testing according to JIS Z 3139: 1978. The result showed that the welding current, welding time and electrode force had interaction on tensile shear and nugget size at 95% confidential (P value < 0.05). Factors affecting the tensile shear are the most welding current of 12,000 amp., welding time of 8 cycle and electrode force of 2.5 kN. were tensile shear of 9.83 kN. The nugget size was maximum at 7.15 mm. on welding current of 12,000 amp., welding time of 12 cycle and electrode force of 1.5 kN This research can bring information to the foundation in choosing the appropriate parameters to resistance spot welding process.

Development of advanced resistance spot welding process using control of electrode force and welding current during welding

2012 ◽  
Vol 28 (1) ◽  
pp. 13-20 ◽  
Author(s):  
Rinsei Ikeda ◽  
Yasuaki Okita ◽  
Moriaki Ono ◽  
Koichi Yasuda ◽  
Toshio Terasaki
Keyword(s):  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Resistance Spot ◽  
Electrode Force

A novel expulsion control strategy with abnormal condition adaptability for resistance spot welding

2021 ◽  
pp. 1-27
Author(s):  
Yan Shen ◽  
Yu-Jun Xia ◽  
Huan Li ◽  
Lang Zhou ◽  
Hai-Tao Pan ◽  
...  
Keyword(s):  
Control Strategy ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Current ◽  
Weld Nugget ◽  
Size Difference ◽  
Welding Parameters ◽  
Low Carbon ◽  
Resistance Spot ◽  
Abnormal Condition

Abstract Welding expulsion is a common problem in Resistance Spot Welding (RSW) process, which severely impacts weld quality and surrounding facilities. Existing expulsion control strategies are ineffective for complex and changeable welding conditions. This article studied the growth relationship between weld nugget and corona bond under two abnormal conditions: edge proximity (EP) and initial sheet gaps (IG). It is testified that expulsion would occur when the nugget size exceeds the corona bond size under EP and IG conditions. Reducing the welding current before the expulsion time can increase the size difference between the corona bond and the weld nugget, thereby delay and even eliminate the occurrence of expulsion. In this way, a novel online expulsion control strategy, named short-time current regulation (STCR), is proposed through expulsion moment analysis of historical weld data. The effect of the new control strategy is verified with workpieces ranging from low carbon steel to ultra-high strength steel. Experimental results showed that STCR can effectively reduce the amount of expelled metal, decrease the indentation depth and increase the nugget diameter. The method not only works well under one specific abnormal condition, but also adapts to the transition between different welding conditions. This novel expulsion control strategy can help achieve expulsion-free RSW process in mass production without frequent manual offline optimization of welding parameters.

Evaluation of the Role of Eddy Current in Resistance Spot Welding

2009 ◽  
Vol 131 (6) ◽  
Author(s):  
M. Abu-Aesh ◽  
Moataza Hindy
Keyword(s):  
Eddy Current ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Welding Process ◽  
Welding Current ◽  
Work Piece ◽  
Resistance Spot ◽  
Precise Prediction ◽  
Welding Processes

Extensive work had been conducted on spot-welding due to its rapidly increasing industrial importance. The resistance spot-welding involves complicated phenomena, as several effects are found in the process, e.g., temperature, surface roughness, pressure, and eddy current effects. Most of the work exerted for analyzing the spot-welding process neglect the effect of the eddy current generated during the flow of the huge welding main current through the assembly of electrodes and work sheets. This work presents an analytical method to investigate the generation of eddy current and to determine the total effective welding current in spot-welding. The current distribution on the work sheet when it is fed by a conducting electrode is also investigated. The obtained current formula is based on electromagnetic principles, where a very strong magnetic field is generated in the core of the electrodes as well as in the materials of work sheets due to the flow of very high amperage. The final resultant effective current is the superposition of the electrode welding current and the induced eddy current in the electrode and work piece assembly. The results offer a viable mathematical model, which can be applied for a precise prediction of the effective value of welding current in spot-welding processes, if applied in a comprehensive model including all involved effects.

Sign in / Sign up

Export Citation Format

Share Document