Removal of nickel from nickel production pulp simulators during gas-phase conversion

2020 ◽  
Vol 21 (9) ◽  
pp. 418-427
Author(s):  
Sergey Kulyukhin ◽  
◽  
Yurii Nevolin ◽  
Alexsandr Seliverstov

A new approach to Ni removal from simulators of dump waste product of the industrial waste purification of the wet gas-cleaning plant and the copper electrolysis workshop at the Copper Plant (Polar branch PJSC MMC «Norilsk Nickel») is proposed. The method is based on gas-phase treatment of waste product with NOХ, HNO3, or NH3 vapors, followed by dissolution of Ni salt in water. It has been found out that using nitrating media, containing HNO3 (vapor), NOX and H2O (vapor), allowed us to perform the effective leaching of nickel from the pulp simulator volume. A possible disadvantage of the method is a simultaneous leaching of considerable amounts of calcium and sulfur.

Author(s):  
Kalina Grzelak ◽  
Rouzana Pulikkal Thumbayil ◽  
Søren Kegnæs ◽  
Maciej Trejda ◽  
Anders Riisager

2011 ◽  
Vol 367 ◽  
pp. 63-71 ◽  
Author(s):  
Adrian O. Eberemu ◽  
Agapitus A. Amadi ◽  
Joseph E. Edeh

Laboratory study on compacted tropical clay treated with up to 16% rice husk ash (RHA), an agro-industrial waste; to evaluate its hydraulic properties and hence its suitability in waste containment systems was carried out. Soil-RHA mixtures were compacted using standard Proctor, West African Standard and modified Proctor efforts at-2, 0, 2 and 4% of optimum moisture content (OMC). Compacted samples were permeated and the hydraulic behaviour of the material was examined considering the effects of moulding water content, water content relative to optimum, dry density and RHA contents. Results showed decreasing hydraulic conductivity with increasing moulding water content and compactive efforts; it also varied greatly between the dry and wet side of optimum decreasing towards the wet side. Hydraulic conductivity generally decreased with increased dry density for all effort. Hydraulic conductivity increased with rice husk ash treatment at the OMC; but were within recommended values of 1 x 10-7 cm/s for up to 8% rice husk ash treatment irrespective of the compactive effort used. This shows the suitability of the material as a hydraulic barrier in waste containment systems for up to 8% rice husk ash treatment and beneficial reuse of this agro-industrial waste product.


2021 ◽  
Vol 321 ◽  
pp. 01001
Author(s):  
Cansu Deniz Canal ◽  
Erhan Böke ◽  
Ali Cemal Benim

Combustion of pulverized biomass in a laboratory swirl burner is computationally investigated. The two-phase flow is modelled by an Eulerian-Lagrangian approach. The particle size distribution and turbulent particle dispersion are considered. The radiative heat transfer is modelled by the P1 method. For modelling turbulence, different RANS modelling approaches are applied. The pyrolysis of the solid fuel is modelled by a single step mechanism. For the combustion of the volatiles a two-step reaction mechanism is applied. The gas-phase conversion rate is modelled by the Eddy Dissipation Model, combined with kinetics control. The results are compared with measurements.


2021 ◽  
Author(s):  
Junhui Li ◽  
Paul Dijkstra ◽  
Qihong Lu ◽  
Shanquan Wang ◽  
Shaohua Chen ◽  
...  

AbstractEffective degradation of N,N-Dimethylformamide (DMF), an important industrial waste product, is challenging as only few bacterial isolates are known to be capable of degrading DMF. Aerobic remediation of DMF has typically been used, whereas anoxic remediation attempts are recently made, using nitrate as one electron acceptor, and ideally include methane as a byproduct. Here, we analyzed 20,762 complete genomes and 28 constructed draft genomes for the genes associated with DMF degradation. We identified 952 genomes that harbor genes involved in DMF degradation, expanding the known diversity of prokaryotes with these metabolic capabilities. Our findings suggest acquisition of DMF-degrading gene via plasmids are important in the order Rhizobiales and genus Paracoccus, but not in most other lineages. Degradation pathway analysis reveals that most putative DMF degraders using aerobic Pathway I will accumulate methylamine intermediate, while members of Paracoccus, Rhodococcus, Achromobacter, and Pseudomonas could potentially mineralize DMF completely under aerobic conditions. The aerobic DMF degradation via Pathway II is more common than thought and is primarily present in α-and β-Proteobacteria and Actinobacteria. Most putative DMF degraders could grow with nitrate anaerobically (Pathway III), however, genes for the use of methyl-CoM to produce methane were not found. These analyses suggest that microbial consortia could be more advantageous in DMF degradation than pure culture, particularly for methane production under the anaerobic condition. The identified genomes and plasmids form an important foundation for optimizing bioremediation of DMF-containing wastewaters.ImportanceDMF is extensively used as a solvent in industries, and is classified as a probable carcinogen. DMF is a refractory compound resistant to degradation, and until now, only few bacterial isolates have been reported to degrade DMF. To achieve effective microbial degradation of DMF from wastewater, it is necessary to identify genomic diversity with the potential to degrade DMF and characterize the genes involved in two aerobic degradation pathways and potential anaerobic degradation for methane production. A wide diversity of organisms has the potential to degrade DMF. Plasmid-mediated degradation of DMF is important for Rhizobiales and Paracoccus. Most DMF degraders could grow anaerobically with nitrate as electron acceptor, while co-cultures are required to complete intermediate methanogenesis for methane production. This is the first genomics-based global investigation into DMF degradation pathways. The genomic database generated by this study provides an important foundation for the bioremediation of DMF in industrial waste waters.Abstract Figure


1985 ◽  
Vol 49 (5) ◽  
pp. 1267-1270
Author(s):  
A. A. Andrizhievskii ◽  
A. A. Mikhalevich ◽  
A. G. Trifonov

2017 ◽  
Vol 46 (16) ◽  
pp. 5189-5201 ◽  
Author(s):  
Sherif Okeil ◽  
Jan Krausmann ◽  
Inga Dönges ◽  
Sandra Pfleger ◽  
Jörg Engstler ◽  
...  

ZnS nanoparticles have been synthesized on vertically aligned carbon nanotubes by gas-phase conversion of ZnO nanoparticles which have been tethered on vertically aligned carbon nanotubes using atomic layer deposition (ALD).


Sign in / Sign up

Export Citation Format

Share Document