scholarly journals Ash disposal - mine fires - environment- an Indian dilemma

2000 ◽  
Vol 22 ◽  
Author(s):  
S. R. Michalski ◽  
R. E. Gray

Coal combustion ash disposal at mine sites may provide a means to deal with the serious problems of coal mine fires, orphaned mined land and coal ash disposal in India. India produces about 70 million metric tons per annum (Mta) of coal ash from the combustion of 320 Mta of domestically produced coal, the average ash content being about 30-35 per cent as opposed to an average ash content of less than 10 per cent in the U.S. In other words, India produces coal ash at about triple the rate of the U.S. Currently, 95 per cent of this ash is sluiced into gigantic slurry ponds, many located near urban areas and consuming vast amounts of premium land. Conversely, the Jharia Coalfield produces about 30 Mta of this ash and also contains the world's largest complex of underground coal mine fires. The fires occupy an aggregate surface area of about 10 square kilometres where the land surface is extremely degraded. Similarly, the Singrauli Coalfield, suffers from the environmental effects of open cast mining, overburden dumps for mine waste and an enormous coal combustion ash disposal problem, which is probably the largest such problem in India. Coal combustion ash haulback to the Jharia and Singrauli Coalfields as well as to other coalfields in India can find beneficial use by: - Controlling mine fires through surface and underground sealing with coal combustion ash, - Filling open-cast mine pits, depressed, and subsided areas, - Filling abandoned underground workings to control ground subsidence, - Reducing ground water flow through mine backfill to retard leaching of acid or metals forming constituents, and - Serving as a soil amendment to restore soil fertility. Placement of ash in surface and underground mines whether in the Jharia or Singrauli Coalfields or elsewhere in India, can provide an efficient, cost-effective method to remove significant quantities of ash from pond disposal while at the same time contributing to mine fire and subsidence abatement, mined land reclamation and restoration of land productivity. Wise natural resource management suggests a reasonable approach to disposal and beneficial use of coal ash is to return it to its original location – the mine.

2021 ◽  
pp. 301-321
Author(s):  
Sudhish Chandra Banerjee
Keyword(s):  

1983 ◽  
Vol 15 (11) ◽  
pp. 65-82 ◽  
Author(s):  
D J R Dodd

The production of electricity from coal combustion started in Ontario in 1951; by 2010 most of Ontario Hydro's existing coal-fired power plants could be largely retired. The legacy of this 60 year period of coal combustion will be a few fly ash-cement buildings, a few fly ash-filled bridge abutments and several large megatonne fly ash disposal sites. In-house research studies into ash leaching characteristics began 20 years after fly ash disposal commenced - current environmental awareness, coupled with advances in chemical analytical technology dictate that laboratory studies and disposal site monitoring will continue for years to come. Some of the variables - coal source, ash characteristics, disposal site location and design, leachate monitoring, collection and treatment plans - are discussed in relation to the Ontario situation and the anticipated time frame for continued study. Future areas for research and future prospects for large scale fly ash disposal projects are identified. The current findings indicate that properly engineered ash disposal projects are an asset, not a burden, to the people of Ontario.


Author(s):  
Junxiang Guo ◽  
Lingling Zhang ◽  
Daqiang Cang ◽  
Liying Qi ◽  
Wenbin Dai ◽  
...  

Abstract In this study, a novel swirl combustion modified device for steel slag was designed and enhanced with the objective of achieving highly efficient and clean coal combustion and also for achieving the whole elements utilization of coal. Coal ash and steel slag were melted in the combustion chamber and subsequently entered the slag chamber. The detrimental substances solidified and formed crystals, which allowed for the comprehensive utilization of the ash and slag. Our experiments mainly aimed to mitigate the formation of NOx, while using the heat and slag simultaneously during the coal combustion without a combustion efficiency penalty. The increase in the device’s energy efficiency and reduction in the NOx emissions are important requirements for industrialization. The experiments were carried out in an optimized swirling combustion device, which had a different structure and various coal feeding conditions in comparison to previously reported devices. The fuel-staged and non-staged combustion experiments were compared under different coal ratios (bitumite:anthracite). For the fuel-staged combustion experiments, the NOx concentration in the flue gas was observed to decrease significantly when the coal ratio of 1:1, an excess air coefficient of 1.2, and a fuel-staged ratio of 15:85 were used. Under these conditions, the flue gas temperature was as high as 1,620°C, while the NOx concentration was as low as 320 mg/m3 at 6 % O2. The air-surrounding-fuel structure that formed in the furnace was very beneficial in reducing the formation of NOx. In comparison to other types of coal burners, the experimental combustion device designed in this study achieved a significant reduction of NOx emissions (approximately 80 %).


Measurement ◽  
2021 ◽  
pp. 110589
Author(s):  
Weidong Kanghui Zhang ◽  
Weidong Wang ◽  
ziqi Lv ◽  
Lizhang Jin ◽  
Dinghua Liu ◽  
...  

2020 ◽  
Vol 192 ◽  
pp. 04007
Author(s):  
Yuri Malinin ◽  
Nikolai Grib ◽  
Pavel Kuznetsov ◽  
Zhang Ze

The article presents a brief analysis of the key methods used for spatial modelling of mining and geological indicators describing the composition, structure and state of rock deposits. The main limitations of the analysed methods when applied under real conditions are outlined. It is proposed to overcome these limitations using Markov nonlinear algorithms. By applying the principles of multi-dimensional Markov modelling to a geological object, interval types were determined for modelling mining and geological parameters of the Elginsky coal mine. As an example, the article presents the results of predicting the ash content for the U5 section of the Elginsky coal mine on the basis of one of the cross-sections of the developed three-dimensional model.


2006 ◽  
Vol 3 (3) ◽  
pp. 212-218 ◽  
Author(s):  
Rashi Agarwal ◽  
D Singh ◽  
D S Chauhan ◽  
K P Singh

Sign in / Sign up

Export Citation Format

Share Document