MALLEABLE IRON

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Malleable Iron ◽  
Iron Foundries ◽  
Excellent Stability

Abstract MALLEABLE IRON is a tough, malleable, shock-resisting cast iron. It has good corrosion resistance and excellent stability at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: CI-23. Producer or source: Malleable iron foundries.

PEARLITIC MALLEABLE IRON

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Malleable Iron

Abstract PEARLITIC MALLEABLE IRON is a high strength cast iron recommended for dependable service, strength and machinability in highly stressed parts at work in mobile and stationary mechanisms. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-26. Producer or source: Albian Malleable Iron Company.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

ADVANCE

Alloy Digest ◽  
1956 ◽  
Vol 5 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Temperature Coefficient ◽  
Electrical Resistance ◽  
Heat Treating ◽  
Temperature Coefficient Of Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract ADVANCE is a copper-nickel alloy having high electrical resistance, negligible temperature coefficient of resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on casting, forming, heat treating, machining, and joining. Filing Code: Cu-40. Producer or source: Driver-Harris Company.

AA B443.0

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract AA B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-270. Producer or source: Various aluminum companies.

ALUMINUM 2021

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperatures ◽  
Heat Treating ◽  
Notch Toughness ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Aluminum Company

Abstract ALUMINUM 2021 is a cryogenic alloy whose ductility and relative notch toughness are not reduced as the tensile strength increases at the low temperatures. It is tough, weldable, and has good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-190. Producer or source: Aluminum Company of America.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

COPPER ALLOY No. C93700

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Tin Bronze ◽  
Low Strength

Abstract Copper Alloy No. C93700 is a cast bronze with relatively low strength, good machinability and good corrosion resistance. Commercial names formerly used (not recommended) are (1) High-Leaded Tin Bronze, (2) Ingot No. 305, (3) Bushing and Bearing Bronze and (4) 80-10-10. Its many applications include bearings, bushings, impellers and pressure-tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-421. Producer or source: Copper alloy foundries.

ALUMINUM D612

Alloy Digest ◽  
1966 ◽  
Vol 15 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Natural Aging ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
High Shock ◽  
Aging Alloy ◽  
Shock Resistance

Abstract Aluminum D612 is a high strength natural aging alloy having high shock resistance and good corrosion resistance for pressure tight castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Al-160. Producer or source: Reynolds Metals Company.

ALUMINUM B443.0

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Thin Walls ◽  
Wide Range

Abstract ALUMINUM B443.0 is an aluminum-5% silicon casting alloy recommended for castings of intricate design and thin walls. It is pressure-tight and has good corrosion resistance and good ductility and toughness. Its wide range of uses include architectural, marine and ornamental components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-214. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document