DURA-BAR 100-70-03

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Ductile Iron ◽  
High Strength ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Continuous Cast ◽  
Hardness Values ◽  
Cast Products

Abstract Dura-Bar 100-70-03 is a pearlitic ductile iron that is used for continuous cast products. It has the best wear resistance of the ascast ductile irons and is used in applications requiring high strength and high wear resistance. This grade is normally used as an alternative to quenched and tempered steels that have hardness values less than 302 HBW. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on heat treating and machining. Filing Code: CI-74. Producer or source: Charter Dura-Bar, Inc.

DURA-BAR 80-55-06

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Surface Finish ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Cast Products

Abstract Dura-Bar 80-55-06 is a ferritic-pearlitic ductile iron that is used for continuous cast products. It offers higher strength and wear resistance when compared to Dura-Bar 65-45-12, while still possessing good machinability and surface finish. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating and machining. Filing Code: CI-71. Producer or source: Charter Dura-Bar, Inc.

DURA-BAR 65-45-12

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Good Ductility ◽  
Nodular Graphite ◽  
Cast Products

Abstract Dura-Bar 65-45-12 is a ductile iron that is used for continuous cast products. Its microstructure consists of nodular graphite in a matrix of ferrite with small amounts of pearlite. Dura-Bar 65-45-12 is used for moderately stressed parts requiring good ductility and machinability. This datasheet provides information on composition, physical properties, tensile properties, compressive and shear strength. It also includes information on heat treating and machining. Filing Code: CI-69. Producer or source: Charter Dura-Bar, Inc.

TOUGHTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Cold Work Tool Steel

Abstract Toughtec SF is a spray-formed cold-work tool steel offering a combination of high wear resistance and very good ductility. Toughtec SF is suitable for the production of hot shearing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-648. Producer or source: Böhler-Uddeholm North America.

ROLTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Good Resistance ◽  
Cold Work Tool Steel

Abstract Roltec SF is a spray formed cold-work tool steel offering a combination of high wear resistance and very good resistance to chipping and cracking. Roltec SF is suitable for the production of rolls and slitter knives. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-644. Producer or source: Böhler-Uddeholm North America.

DURA-BAR GX

Alloy Digest ◽  
2021 ◽  
Vol 70 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Vibration Damping ◽  
Damping Capacity ◽  
Continuous Cast ◽  
Cast Products

Abstract Dura-Bar GX is a heat-treatable, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of moderate strength, good wear resistance, and good vibration damping capacity. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-83. Producer or source: Charter Dura-Bar, Inc.

DURA-BAR 60-40-18

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Ferritic Matrix ◽  
Nodular Graphite ◽  
Cast Products

Abstract Dura-Bar 60-40-18 is a ductile iron that is used for the production of continuous cast products. Its microstructure consists of nodular graphite in a fully ferritic matrix. Dura-Bar 60-40-18 is typically used for applications requiring excellent ductility and impact strength. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-86. Producer or source: Charter Dura-Bar, Inc.

VENANGO SPECIAL

Alloy Digest ◽  
1957 ◽  
Vol 6 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Carbon Content ◽  
Tensile Properties ◽  
Compression Strength ◽  
High Strength ◽  
Heat Treating ◽  
High Impact ◽  
High Wear Resistance ◽  
Aisi Type

Abstract VENANGO SPECIAL is a low-alloy high-strength tool steel of the silico-manganese type having high impact and high compression strength plus high wear resistance. It is similar to AISI Type S2 but with higher carbon content. This datasheet provides information on composition, hardness, tensile properties, and compressive strength. It also includes information on forming, heat treating, and machining. Filing Code: TS-65. Producer or source: Cyclops Corporation.

INDUSTEEL TENASTEEL

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Vanadium Alloy ◽  
Tool Steels ◽  
High Carbon ◽  
Cold Work Tool Steel

Abstract Industeel Tenasteel is a high-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is specially designed to replace Type D2 and X153CrMoV12 (1.2379) cold work tool steels in applications requiring high wear resistance and very good toughness. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-795. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

BÖHLER S590 MICROCLEAN

Alloy Digest ◽  
2018 ◽  
Vol 67 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Dimensional Stability ◽  
High Speed ◽  
High Performance ◽  
High Speed Steel ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Powder Metal

Abstract Böhler (or Boehler) S590 is a high-speed steel with high-wear resistance, high-compressive strength, very good through-hardening properties, good toughness, good dimensional stability on heat treat, and very good temper resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-752. Producer or source: Voestalpine High Performance Metals Corporation.

DURA-BAR G2S

Alloy Digest ◽  
2021 ◽  
Vol 70 (4) ◽  
Keyword(s):  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Creep Resistance ◽  
Gray Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
Gray Cast ◽  
Continuous Cast ◽  
Cast Products

Abstract Dura-Bar G2S is a high strength, pearlitic gray cast iron that is used for the production of continuous cast products. It is ideal for applications that require a combination of superior hardenability, strength, and creep resistance. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties. It also includes information on heat treating and machining. Filing Code: CI-80. Producer or source: Charter Dura-Bar, Inc.

Sign in / Sign up

Export Citation Format

Share Document