LUKENS AR-300

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Atmospheric Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Wear Resistant ◽  
Fine Grain

Abstract LUKENS AR-300 is a tough, wear-resistant, water quenched and tempered, fine-grain carbon steel. It contains enough copper to double the atmospheric corrosion resistance of carbon steel free from added copper. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-36. Producer or source: Lukens Steel Company.

SANDVIK 3R66

Alloy Digest ◽  
2002 ◽  
Vol 51 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Interstitial Element ◽  
Carbon And Nitrogen

Abstract Sandvik 3R66 is an austenitic grade with low interstitial element levels of carbon and nitrogen. Although many applications exist for clean steels, the alloy was developed specifically for electronic tubing for the production of microchips. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-855. Producer or source: Sandvik Steel Company.

JESSOP No. 9

Alloy Digest ◽  
1991 ◽  
Vol 40 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Wear Resistant ◽  
Armor Plate

Abstract JESSOP No. 9, super high tensile steel, is one of the toughest and most wear resistant steels of its class in existence. Primarily developed as a high tensile, non-magnetic armor plate, it has since been widely used for equipment subject to severe battering. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-457. Producer or source: Jessop Steel Company.

DYNALLOY

Alloy Digest ◽  
1957 ◽  
Vol 6 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Atmospheric Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Carbon Steels ◽  
Rolled Steel ◽  
Bend Strength ◽  
Steel Company

Abstract DYNALLOY is a versatile low-alloy, high-strength, flat rolled steel which combines high physical properties with ductility and weldability. It has higher atmospheric corrosion resistance, and also higher resistance to abrasion, impact and fatigue than plain carbon steels. This datasheet provides information on composition, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-56. Producer or source: Alan Wood Steel Company.

SAE 1050

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Strength And Toughness

Abstract SAE 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-110. Producer or source: Carbon steel mills.

DURONZE 707

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Hot Working ◽  
Wear Resistant ◽  
Silicon Bronze

Abstract Duronze 707 is a tough, corrosion and wear resistant aluminum-silicon bronze, with excellent hot working and forging characteristics plus good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-109. Producer or source: Bridgeport Brass Company.

UNILOY 303, 303Se

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
General Purpose

Abstract UNILOY 303 and 303Se are improved machinability grades of 18-8 general purpose austenitic stainless steels. Machinability is respectively improved by additions of sulfur or selenium. Whereas standard 18-8 stainless steel had a machinability rating about 40-50% that of AISI B1112 free-machining carbon steel, these steels have a rating of about 70% that of AISI B1112. UNILOY 303Se is preferred over UNILOY 303 where machined finish and good cold formability and corrosion resistance are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-512. Producer or source: Cytemp Cyclops.

JS ALLOY 255

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Company ◽  
Excellent Corrosion Resistance

Abstract JS Alloy 255 is a duplex ferritic-austenitic stainless steel. It has been designed to provide a superior combination of high stength and excellent corrosion resistance for a wide variety of applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-495. Producer or source: Jessop Steel Company.

SURF-HARD

Alloy Digest ◽  
1969 ◽  
Vol 18 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Paper Mill ◽  
Heavy Duty ◽  
Wear Resistant ◽  
Cylinder Liners

Abstract SURF HARD is a nitriding alloy steel designed for those applications requiring exceptionally hard wear resistant surface and a tough core, such as heavy duty gears, spline shafts, rubber and paper mill rolls, cylinder liners, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-246. Producer or source: Atlas Alloys Division, Rio Algom Corporation.

UNILOY 14 HV

Alloy Digest ◽  
1969 ◽  
Vol 18 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Structural Parts

Abstract UNILOY-14HV is a low-alloy, medium carbon steel recommended for high temperature applications for bolting and structural parts at temperatures up to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-241. Producer or source: Cyclops Corporation.

Sandvik SANMAC 316L

Alloy Digest ◽  
1995 ◽  
Vol 44 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Molybdenum Content ◽  
Nickel Steel ◽  
Steel Company

Abstract Sandvik SANMAC 316L is a molybdenum-alloyed austenitic chromium-nickel steel with improved machinability. As compared to ordinary 316L it also has a higher molybdenum content. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, and deformation. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-614. Producer or source: Sandvik Steel Company.

Sign in / Sign up

Export Citation Format

Share Document