CEN C22E (1.1151), C22R (1.1149)

Alloy Digest ◽  
2021 ◽  
Vol 70 (5) ◽  
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
High Tensile Strength ◽  
European Committee ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract CEN C22E and C22R are low-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. They are typically used for small moderately stressed parts, where higher strength levels are needed than can be achieved in the lower carbon grades, and also where toughness is more important than high tensile strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-210. Producer or source: European Committee for Standardization.

LUCEFIN GROUP C30 (1.0528), C30E (1.1178), C30R (1.1179)

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Medium Carbon ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin Group C30, C30E, and C30R are medium-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C30E and C30R may also be flame or induction hardened. C30, C30E, and C30R are widely used for small, moderately stressed parts, where higher strength levels are needed than can be achieved in the lower carbon grades, and also where toughness is more important than high tensile strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-206. Producer or source: Lucefin S.p.A.

LUCEFIN C25 (1.0406), C25E (1.1158), C25R (1.1163)

Alloy Digest ◽  
2021 ◽  
Vol 70 (7) ◽  
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
High Tensile Strength ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin C25, C25E, and C25R are low-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. These steels are typically used for small, moderately stressed parts, where higher strength levels are needed than can be achieved in the lower carbon grades; they also are used for applications in which toughness is more important than high tensile strength. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-211. Producer or source: Lucefin S.p.A.

LUCEFIN C60 (1.0601), C60E (1.1221), C60R (1.1223)

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Carbon ◽  
Wear Characteristics ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin C60, C60E, and C60R are high-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C60E and C60R may also be flame or induction hardened. C60, C60E, and C60R are used for applications where the higher carbon is needed to improve wear characteristics and where strength levels required are higher than those attainable with the lower carbon grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-213. Producer or source: Lucefin S.p.A.

LUCEFIN GROUP C35 (1.0501), C35E (1.1181), C35R (1.1180)

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Medium Carbon ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin Group C35, C35E, and C35R are medium-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C35E and C35R may also be flame or induction hardened. C35, C35E, and C35R are widely used for moderately stressed parts, where higher strength levels are needed than can be achieved in the lower carbon grades, and where the expense of an alloy steel is not justified. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-205. Producer or source: Lucefin S.p.A.

LUCEFIN GROUP C50 (1.0540), C50E (1.1206), C50R (1.1241)

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Medium Carbon ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin Group C50, C50E, and C50R are medium-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C50E and C50R may also be flame or induction hardened. C50, C50E, and C50R are widely used for moderately stressed parts, where higher strength levels are needed than can be achieved in the lower carbon grades, and where the expense of an alloy steel is not justified. Owing to their low hardenability, their use in the quenched and tempered condition is not recommended for large sizes, as the improvement in mechanical properties over the normalized condition is insufficient to justify the additional cost of heat treatment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CS-207. Producer or source: Lucefin S.p.A.

LUCEFIN C55 (1.0535), C55E (1.1203), C55R (1.1209)

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Medium Carbon ◽  
Wear Characteristics ◽  
Alloy Steels ◽  
Cold Worked ◽  
Lower Carbon

Abstract Lucefin C55, C55E, and C55R are medium-carbon, non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. C55E and C55R may also be flame or induction hardened. C55, C55E, and C55R are used for applications where the higher carbon is needed to improve wear characteristics and where strength levels required are higher than those attainable with the lower carbon grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating, machining, and joining. Filing Code: CS-212. Producer or source: Lucefin S.p.A.

VASCO 9-4-20

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
High Temperature ◽  
Ultimate Tensile Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
Temperature Performance

Abstract Vasco 9-4-20 (0.20 wt% C) is a premium quality aircraft steel that combines high tensile strength with good fracture toughness. It is a heat-treatable alloy capable of developing an ultimate tensile strength greater than 190 ksi. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: SA-489. Producer or source: Vasco, An Allegheny Teledyne Company.

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

NJZ ALLOY No. 55

Alloy Digest ◽  
1976 ◽  
Vol 25 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
New Jersey ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Tensile Strength ◽  
High Stiffness ◽  
Zinc Cadmium ◽  
Forming Characteristics

Abstract NJZ Alloy No. 55 is a zinc-cadmium alloy characterized by high tensile strength and hardness but low ductility. It has high stiffness and resiliency but low drawing and forming characteristics. Its applications include hardware and medallions. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-30. Producer or source: New Jersey Zinc Company.

Sign in / Sign up

Export Citation Format

Share Document