BERYLCO 165

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
Precipitation Hardening ◽  
Lower Cost ◽  
High Strength ◽  
Heat Treating ◽  
Resistance To Wear ◽  
Hardened Condition

Abstract Berylco 165 is a lower cost version of the standard 1.9 percent beryllium copper alloy. It offers good formability in the unhardened condition with high final properties following precipitation hardening. It is also available in the mill hardened condition which, without heat treatment by the fabricator, reaches strengths and hardnesses appreciably higher than bronze. Through good formability, it offers cost-saving opportunities by eliminating hardening. It combines good ductility with high strength and hardness, good electrical and thermal conductivity, and excellent resistance to wear and fatigue. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-20. Producer or source: Beryllium Corporation. Originally published November 1954, revised April 1963.

AMPCOLOY 83

Alloy Digest ◽  
1976 ◽  
Vol 25 (3) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Copper Base ◽  
Resistance To Wear ◽  
Copper Base Alloy

Abstract AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. 172

Alloy Digest ◽  
1966 ◽  
Vol 15 (6) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Copper Alloy ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
General Corrosion ◽  
Endurance Strength ◽  
Resistance To Wear

Abstract Copper Alloy No. 172 is a precipitation hardening beryllium-copper alloy having high elastic and endurance strength, good electrical and thermal conductivity, excellent resistance to wear, and high resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-165. Producer or source: Copper and copper alloy mills.

CMW 100

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Treatment ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
High Tensile Strength ◽  
Electrical Components ◽  
Flash Welding ◽  
Hardening Heat Treatment

Abstract CMW 100 is a copper alloy that combines high tensile strength with high electrical and thermal conductivity. It responds to age-hardening heat treatment. It is used for flash welding dies, springs, electrical components, high-strength backing material for brazed assemblies, and wire guides. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-29. Producer or source: CMW Inc. Originally published as Mallory 100, August 1955, revised October 2000.

COPPER ALLOY No. 815

Alloy Digest ◽  
1977 ◽  
Vol 26 (5) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Chromium Alloy ◽  
High Electrical Conductivity ◽  
Medium Hardness ◽  
Hardened Condition

Abstract Copper Alloy No. 815 is an age-hardenable cast copper-chromium alloy. It is characterized by high electrical and thermal conductivities combined with medium hardness and strength in the age-hardened condition. It is used for components requiring high electrical conductivity or high thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-332. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 674

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Hardened Steel ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Resistance To Wear ◽  
Bearing Alloy

Abstract Copper Alloy No. 674 is a non-heat-treatable, high-strength bearing alloy for applications requiring good bearing properties, especially in conjunction with hardened steel mating surfaces, and the ability to stand up under moderately high loads. It has outstanding resistance to wear along with high bearing strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-287. Producer or source: Copper alloy producers.

PHOSNIC BRONZE

Alloy Digest ◽  
1965 ◽  
Vol 14 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Excellent Corrosion Resistance ◽  
Endurance Strength ◽  
Prolonged Stress ◽  
Hardening Heat Treatment

Abstract CHASE PHOSNIC BRONZE is a high copper alloy combining high strength and high conductivity, both electrical and thermal, in an unusual degree. It has high workability and excellent corrosion resistance. The additions of nickel and phosphorus to the copper render the alloy capable of being hardened and strengthened by age-hardening heat treatment. The alloy has also high endurance strength in the harder drawn tempers of wire, and excellent resistance to creep or flow under the influence of prolonged stress. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-12. Producer or source: Chase Brass & Copper Company Inc.. Originally published November 1953, revised February 1965.

COPPER ALLOY No. C82500

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Copper Base ◽  
Hardened Condition

Abstract Copper Alloy No. C82500 is an age-hardenable copper-base casting alloy containing nominally 2% beryllium. It offers high strength, toughness and good resistance to corrosion. It has good fatigue strength in the age-hardened condition. Typical uses include bushings, bearings, valves, cams and safety tools. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-512. Producer or source: Copper alloy foundries.

BERYLCO 33-25

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Good Resistance ◽  
High Fatigue

Abstract Berylco 33 25 is a free-machining beryllium copper alloy which has substantially the same mechanical properties and response to heat treatment as the standard Berylco 25, but which can be machined in 40 percent of the time. The alloy has high strength and hardness, a high fatigue strength, good resistance to corrosion and wear and good electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-196. Producer or source: Kawecki Berylco Industries Inc..

CRUCIBLE 17Cr-4Ni SUPER-X

Alloy Digest ◽  
1991 ◽  
Vol 40 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Martensitic Stainless Steel ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Specialty Metals

Abstract CRUCIBLE 17Cr-4Ni SUPER-X is a precipitation-hardening martensitic stainless steel which develops high strength and hardness after relatively simple heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-521. Producer or source: Crucible Specialty Metals Division, Colt Industries.

COPPER ALLOY No. 173

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Resistance ◽  
Work Hardening ◽  
Copper Alloy ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
General Corrosion ◽  
Welding Equipment ◽  
Resistance To Wear ◽  
Lead Addition

Abstract Copper Alloy No. 173 is a precipitation-hardenable beryllium-copper alloy with a lead addition of nominally 0.40% to give it fairly good machinability. By combining work hardening and precipitation hardening, tensile strengths in excess of 200,000 psi can be developed. This alloy is characterized by high elastic and fatigue strengths, excellent resistance to wear and high resistance to general corrosion. Its many uses include springs, fuse clips, switch parts, pump parts and welding equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-394. Producer or source: Copper and copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document