AMPCOLOY 62

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Zinc Alloys ◽  
Copper Base ◽  
Copper Zinc ◽  
Copper Base Alloy ◽  
Strength And Ductility

Abstract AMPCOLOY 62 is a cast copper-base alloy known as low-tensile manganese bronze. Despite the fact that it is at the low-strength end of the manganese bronzes, it has a tensile strength about 20,000 psi greater than that of the corresponding copper-zinc alloys; therefore, it is often classified as a high-strength yellow brass. It has an excellent combination of strength and ductility, and good resistance to corrosion. Among its applications are marine hardware, propellers and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-369. Producer or source: Ampco Metal Inc..

AMPCO 483

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Base ◽  
Copper Base Alloy

Abstract AMPCO 483 is a copper-base alloy that can be used in the cast or wrought form. It provides high strength, high hardness, excellent resistance to corrosion and good resistance to fatigue and wear. It is well suited for service at temperatures up to 750 F and for applications such as pickling equipment, nuts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-352. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. C86100

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Combination ◽  
Good Resistance ◽  
Copper Zinc ◽  
Strengthening Element ◽  
Strength And Ductility

Abstract Copper Alloy No. C86100 is a copper-zinc-aluminum-manganese-iron alloy, sometimes classified as a high-strength yellow brass. The principal strengthening element is aluminum. Its tensile strength is typically 95,000 psi (655 MPa). It has a good combination of strength and ductility along with good resistance to corrosion. Its typical uses are marine castings, gears, gun mounts, bearing and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-510. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 862

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Copper Alloy ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Zinc ◽  
Strengthening Element ◽  
Strength And Ductility

Abstract Copper Alloy No. 862 is a copper-zinc-aluminum-manganese-iron alloy; aluminum is the principal strengthening element. It is classified as a high-strength yellow brass; its typical tensile strength is 95,000 psi. It has an excellent combination of strength and ductility along with good resistance to corrosion. Its numerous applications include cams, valve stems and marine hardware. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-365. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C82400

Alloy Digest ◽  
1987 ◽  
Vol 36 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Base ◽  
Copper Base Alloy

Abstract Copper Alloy No. C82400 is a copper-base alloy containing nominally 1.70% beryllium. It is characterized by high strength and good resistance to corrosion. Typical applications include safety tools, molds for parts made of plastics, cams, valves and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-525. Producer or source: Copper alloy foundries.

ELKALOY-A

Alloy Digest ◽  
1969 ◽  
Vol 18 (4) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Electrical Contacts ◽  
Copper Base ◽  
Resistance Welding Electrodes ◽  
Metallurgical Company ◽  
Copper Base Alloy

Abstract Elkaloy-A is a copper-base alloy having high strength and toughness coupled with high electrical and thermal conductivity. It is recommended for springs, electrical contacts and resistance welding electrodes. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-198. Producer or source: Mallory Metallurgical Company.

COPPER ALLOY No. C44400 and C44500

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition ◽  
Good Combination ◽  
General Corrosion ◽  
Good Resistance ◽  
Tin Alloys ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract COPPER ALLOY NOS. C44400 and C44500 are copper-zinc-tin alloys inhibited by antimony and phosphorus, respectively. They are commonly known as inhibited admiralty metal or admiralty brass. They have a good combination of strength and ductility and good resistance to general corrosion. The small addition of inhibitor is made to minimize the alloy’s susceptibility to dezincification and stress corrosion. They are used for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-599. Producer or source: Copper and copper alloy mills.

AMPCOLOY 83

Alloy Digest ◽  
1976 ◽  
Vol 25 (3) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Copper Base ◽  
Resistance To Wear ◽  
Copper Base Alloy

Abstract AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

MUELLER ALLOY 6732

Alloy Digest ◽  
1984 ◽  
Vol 33 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Soft Or ◽  
Good Resistance ◽  
Copper Base ◽  
Screw Machine ◽  
Copper Base Alloy ◽  
Machine Work

Abstract MUELLER Alloy 6732 is a free-machining high-leaded copper-base alloy that is especially well suited for screw machine work. It can be used with hard or soft mating members. It can be joined readily by soft or silver soldering. It possesses excellent bearing properties, high mechanical properties and good resistance to corrosion. Its uses include bushings gears, bearings and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-481. Producer or source: Mueller Brass Company.

TELNIC BRONZE

Alloy Digest ◽  
1953 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Base Alloy ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Hot Workability ◽  
Copper Base ◽  
Copper Base Alloy

Abstract Chase TELNIC BRONZE is a high strength copper-base alloy, hardenable both by heat treatment and cold work, and also having good conductivity, corrosion resistance, cold and hot workability, and excellent machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-4. Producer or source: Chase Brass & Copper Company Inc..

COPPER ALLOY No. C82500

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Copper Base ◽  
Hardened Condition

Abstract Copper Alloy No. C82500 is an age-hardenable copper-base casting alloy containing nominally 2% beryllium. It offers high strength, toughness and good resistance to corrosion. It has good fatigue strength in the age-hardened condition. Typical uses include bushings, bearings, valves, cams and safety tools. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-512. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document