ALLVAC AC718

Alloy Digest ◽  
1991 ◽  
Vol 40 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Good Ductility

Abstract Allvac 718 is produced by vacuum induction melting followed by vacuum arc or electroslag consumable remelting. Th alloy has excellent strength and good ductility up to 1300 F (704 C). It also has excellent cryogenic properties. It has unique welding characteristics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-394. Producer or source: Allvac Inc..

NICKELVAC X-751

Alloy Digest ◽  
1990 ◽  
Vol 39 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Aluminum Content ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Service Temperature ◽  
Maximum Service Temperature

Abstract NICKEL VAC X-751 is a modification of NICKEL VAC X-750 carrying higher aluminum content (0.90-1.50 vs 0.4-1.0%). This raises the maximum service temperature 100 F(55 C) to 1600 F(871 C). NICKEL VAC X-751 has a simplified and shortened heat treating cycle relative to NICKEL VAC X-750. It is produced by vacuum induction melting followed by vacuum arc or electroslag remelting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-387. Producer or source: Teledyne Allvac.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UDIMET 90

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Nickel Base Alloy ◽  
Vacuum Arc Remelting ◽  
Temperature Performance ◽  
Nickel Base

Abstract UDIMET 90 is a nickel-base alloy developed for elevated-temperature service. It is produced by vacuum induction melting and vacuum arc remelting techniques to develop optimum properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-174. Producer or source: Special Metals Corporation.

COPPER ALLOY No. C43400

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Ductility ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

COPPER ALLOY No. C51100

Alloy Digest ◽  
1981 ◽  
Vol 30 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Ductility ◽  
Bridge Bearing ◽  
Phosphorus Alloy

Abstract Copper Alloy No. C51100 is a copper-tin-phosphorus alloy with relatively high tensile and yield strengths, good ductility and good resistance to corrosion. It can be fabricated by a number of conventional processes. Its many applications include bridge bearing plates, numerous hardware uses such as bellows, clutch disks, fasteners, springs and textile machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-412. Producer or source: Copper and copper alloy mills.

CP TITANIUM TIMET GRADES Ti-35A, Ti-50A, Ti-65A, Ti-75A, Ti-100A

Alloy Digest ◽  
1992 ◽  
Vol 41 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Ductility ◽  
Excellent Corrosion Resistance

Abstract TIMET GRADES Ti-35A, Ti-50A, Ti-65A, Ti-75A, Ti-100A unalloyed titanium offer good ductility and cold formability, good to excellent weldability, and good to excellent corrosion resistance in neutral to oxidizing environments, including chlorides. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-100. Producer or source: Titanium Metals Corporation (Timet).

BIODUR 316LS

Alloy Digest ◽  
1995 ◽  
Vol 44 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
316L Stainless Steel ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Improve Corrosion Resistance ◽  
Type 316L ◽  
Type 316L Stainless Steel

Abstract BioDur 316LS stainless steel is a modified version of Type 316L stainless steel to improve corrosion resistance for surgical implant applications. The alloy is vacuum arc remelted. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-596. Producer or source: Carpenter.

AISI 4032

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Automotive Industry ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Good Ductility ◽  
Steel Mills

Abstract AISI 4032 is a molybdenum alloy steel of moderate hardenability. It is used extensively in the automotive industry. This steel combines moderate strength and hardness with good ductility and toughness in the quenched-and-tempered condition because it is relatively free from temper embrittlement when tempered in the range 850-1100 F. Among its many uses are nuts, bolts, studs, machinery parts and fasteners for the transportation and other industries. AISI 4032H is a similar steel except that it has a slightly wider range of carbon and manganese. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-411. Producer or source: Alloy steel mills and foundries.

UNS G50461

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Ductility ◽  
Steel Mills ◽  
Wide Range

Abstract UNS NO. G50461 is a low-chromium alloy steel with boron added to increase its hardenability. This steel has medium hardenability and strength with good ductility. It is used in a wide range of machinery and tool applications where its properties meet the requirements. Another grade (UNS No. H50461) has similar properties but slightly wider ranges in percentages of carbon, manganese and chromium; this is known as the H-grade (Hardenability grade). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-408. Producer or source: Alloy steel mills and foundries.

NJZ ALLOY No. 45

Alloy Digest ◽  
1976 ◽  
Vol 25 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
New Jersey ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Hardness ◽  
Heat Treating ◽  
Good Ductility ◽  
High Stiffness

Abstract NJZ Alloy No. 45 is a zinc-copper alloy characterized by high hardness and strength, good ductility and high stiffness. It work hardens easily. Among its many applications are hardware, sporting-equipment components, cable wrappings and watch cases. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-25. Producer or source: New Jersey Zinc Company.

Sign in / Sign up

Export Citation Format

Share Document