THYSSEN 4140 HOLDER

Alloy Digest ◽  
1993 ◽  
Vol 42 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Base Material ◽  
Heat Treating ◽  
Alloy Tool ◽  
Plastic Mold

Abstract THYSSEN 4140 HOLDER material is supplied preheat treated to Rc24/32 (248-302 BHN). It is a free machining alloy tool steel designed especially for plastic mold base material and for holder blocks for die casting dies. It can also be used in non-critical molds where a #2 finish is acceptable. This datasheet provides information on composition and physical properties. It also includes information on heat treating, machining, and joining. Filing Code: SA-468. Producer or source: Thyssen Specialty Steels Inc.

CRUCIBLE CSM #2

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Steel Company ◽  
Heat Treated ◽  
Alloy Tool ◽  
Crucible Steel

Abstract Crucible CSM #2 is an alloy tool steel recommended for die casting dies and plastic molds. It is usually heat treated to two hardness levels, either 200 Brinell or 300 Brinell. CSM #2 machines readily and polishes easily at both hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-210. Producer or source: Crucible Steel Company of America.

UDDEHOLM QRO 80 MICRODIZED

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Improved Performance

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.

BÖHLER-WMD

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Wide Range

Abstract Böhler (or Boehler) WMD is a multi-alloy economical hot work tool steel useful for a wide range of hot work applications, such as headers, upsetters, extrusion and die casting tools and dies, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-214. Producer or source: Böhler Uddeholm N.A..

JESSOP-SAVILLE H.50

Alloy Digest ◽  
1967 ◽  
Vol 16 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract Jessop-Saville H.50 is an air or oil hardening hot work tool steel recommended for die casting dies, hot punches, shear blades and pressing tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-189. Producer or source: Jessop-Saville Ltd, Brightside Works.

FIREDIE 9

Alloy Digest ◽  
1985 ◽  
Vol 34 (11) ◽  
Keyword(s):  
Elevated Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Thermal Shock ◽  
Tool Steel ◽  
Die Casting ◽  
Hot Extrusion ◽  
Heat Treating ◽  
Steel Company ◽  
Hot Work Steel

Abstract FIREDIE 9 is a chromium-molybdenum-cobalt hot-work steel. It has outstanding resistance to softening in elevated-temperature service; the cobalt gives this steel its superior heat resistance. Firedie 9 has excellent resistance to thermal shock; in fact, dies can be water cooled durin operation without fear of cracking. Among its many applications are forging dies, hot-extrusion mandrels, hot-shear blades, die-casting dies and hot punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-450. Producer or source: Columbia Tool Steel Company.

ALMOLD 20

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Carbon Content ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Tool Steels ◽  
High Quality ◽  
Medium Carbon ◽  
Quality Tool

Abstract ALMOLD 20 is a chromium-molybdenum tool steel of medium-carbon content. It was designed especially for zinc die casting dies and plastic molds. It is produced to high-quality tool-steels standards to permit a high luster to be achieved on polished die cavity surfaces. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-292. Producer or source: Allegheny Ludlum Corporation.

BOFORS BP20-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Die Casting ◽  
Heat Treating ◽  
Zinc Alloys ◽  
Lead And Zinc ◽  
Heat Treated ◽  
Alloy Tool

Abstract BOFORS BP20-2 is a vacuum-degassed (BOVAC) alloy tool steel recommended for plastic molds, brake dies, die-casting dies for tin, lead and zinc alloys, and for constructional parts. It is supplied prehardened to 270-300 Brinell and needs no further heat treatment before use; however, it may be heat treated for a number of applications that require higher hardness and strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-263. Producer or source: Bofors Steels Inc..

UHB IMPAX P20

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Mold Cavity ◽  
Tin Alloys

Abstract UHB IMPAX P20 is a chromium-nickel-molybdenum tool steel for molds. It is supplied in the prehardened condition, so that the mold cavity can be machined and the mold placed directly in service. It is used for molds for plastics and die-casting molds for zinc, lead and tin alloys. (See update, IMPAX SUPREME, Alloy Digest TS-497, March 1989.) This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-326. Producer or source: Uddeholm Aktiebolag.

YSS FDAC

Alloy Digest ◽  
2018 ◽  
Vol 67 (11) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Hot Working ◽  
Zinc Alloys ◽  
Temperature Performance ◽  
Small Production

Abstract YSS FDAC is a free-cutting hot-working tool steel. It is used for die casting of aluminum, magnesium, and zinc alloys, particularly for small production use. This datasheet provides information on composition and physical properties. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-755. Producer or source: Hitachi Metals America Ltd.

TLS H13 PQ

Alloy Digest ◽  
2001 ◽  
Vol 50 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Thermomechanical Processing ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Industry

Abstract TLS H13 PQ is an H13 type tool steel of premium quality. It meets the standards needed in the die casting industry by means of special melting techniques, thermomechanical processing, and care in annealing treatments. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-588. Producer or source: Timken Latrobe Steel.

Sign in / Sign up

Export Citation Format

Share Document