SANDVIK 3R12/4L7

Alloy Digest ◽  
1996 ◽  
Vol 45 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Black Liquor ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Design Load ◽  
Recovery Boilers ◽  
Major Application ◽  
Outside Diameter

Abstract Sandvik 3R12/4L7 is a composite tube consisting of type 304L stainless steel for corrosion resistance on the outside diameter and having carbon steel (A210 Gr. A1) as the inside component for both water wetted service and the design load. The major application is tubing to handle the corrosive conditions in black liquor recovery boilers. This datasheet provides information on composition, physical properties, microstructure as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SA-482. Producer or source: Sandvik.

CARPENTER PROJECT 70+ TYPE 304/304L

Alloy Digest ◽  
2003 ◽  
Vol 52 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
304L Stainless Steel ◽  
Type 304 ◽  
Complex Parts

Abstract Carpenter Project 70+ Type 304/304L is a modified version of Type 304/304L stainless steel with improved machinability when compared to conventional 304 (Alloy Digest SS-418, revised September 1997) and 304L (Alloy Digest SS-513, revised November 1997). The alloys are nonhardenable austenitic chromium-nickel steels and are good general-purpose materials for simple and complex parts. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-875. Producer or source: Carpenter Specialty Alloys.

SANDVIK 310/T22

Alloy Digest ◽  
1994 ◽  
Vol 43 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Composite Tube ◽  
Design Load ◽  
Inside Diameter ◽  
Superheater Tube ◽  
310 Stainless Steel ◽  
Outside Diameter ◽  
Load Carrier

Abstract SANDVIK 310/T22 is a composite tube consisting of Type 310 stainless steel for corrosion resistance on the outside diameter and having T22 (21/4 Cr-1Mo) to A213 on the inside diameter to act as the superheater tube and design load carrier. This datasheet provides information on composition. It also includes information on forming and joining. Filing Code: SA-477. Producer or source: Sandvik.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304L

Alloy Digest ◽  
1997 ◽  
Vol 46 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 304L stainless steels are improved machining versions of conventional AISI Type 304L stainless steel. They have higher tensile and creep strengths than conventional 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-513. Producer or source: Carpenter. Originally published July 1990, revised November 1997.

UNILOY 303, 303Se

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
General Purpose

Abstract UNILOY 303 and 303Se are improved machinability grades of 18-8 general purpose austenitic stainless steels. Machinability is respectively improved by additions of sulfur or selenium. Whereas standard 18-8 stainless steel had a machinability rating about 40-50% that of AISI B1112 free-machining carbon steel, these steels have a rating of about 70% that of AISI B1112. UNILOY 303Se is preferred over UNILOY 303 where machined finish and good cold formability and corrosion resistance are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-512. Producer or source: Cytemp Cyclops.

OUTOKUMPU MODA 409/4512

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Oxidation Resistance ◽  
Dry Air ◽  
Coated Carbon

Abstract Outokumpu Moda 409/4512 is a weldable, titanium-stabilized 11.5% chromium ferritic stainless steel with good oxidation resistance in dry air. Because of its titanium alloying, Outokumpu Moda 409/4512 can be welded in all dimensions without becoming susceptible to intergranular corrosion. It is possible to use Outokumpu Moda 409/4512 at elevated temperatures, for example in automotive exhaust systems, where it is often used to replace aluminum-coated carbon steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-1342. Producer or source: Outokumpu Oyj.

ALLEGHENY LUDLUM AL 304DA

Alloy Digest ◽  
2000 ◽  
Vol 49 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Allegheny Ludlum AL 304DA is a composite of three plies consisting of carbon steel surrounded on both sides with type 304 stainless steel. This combination supplies corrosion resistance with good ductility for applications like cookware. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-780. Producer or source: Allegheny Ludlum Corporation.

B&W IRON

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Electric Motor ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Magnetic Characteristics ◽  
Low Carbon ◽  
High Magnetic Permeability

Abstract B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

ACI HW

Alloy Digest ◽  
1957 ◽  
Vol 6 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Cyclic Heating ◽  
Nickel Base Alloy ◽  
Type Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract Type HW is a nickel-base alloy containing chromium and iron. It is austenitic, non-magnetic, and has exceptionally high resistance to corrosion, cyclic heating, and oxidation. It is of the 60 Ni-12Cr type alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-37. Producer or source: Stainless steel foundries. Revised as Alloy Digest Ni-449, April 1994.

AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

Sign in / Sign up

Export Citation Format

Share Document