CREUSABRO 4800

Alloy Digest ◽  
2008 ◽  
Vol 57 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Work Hardening ◽  
High Performance ◽  
Resistant Steel ◽  
Wear Resistant ◽  
Temperature Performance ◽  
Efficient Work

Abstract Creusabro 4800 is a high-performance wear-resistant steel exhibiting better resistance than other quenched steels with a hardness of 400 HB. This 4800 alloy uses a combination of fine distribution of microcarbides and an efficient work hardening in service to achieve wear resistance. This datasheet provides information on composition, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as forming, machining, and joining. Filing Code: SA-579. Producer or source: Industeel USA, LLC.

CREUSABRO 8000

Alloy Digest ◽  
2008 ◽  
Vol 57 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Work Hardening ◽  
High Performance ◽  
Resistant Steel ◽  
Bend Strength ◽  
Temperature Performance ◽  
Efficient Work

Abstract Creusabro 8000 is a high-performance wear-resistant steel exhibiting better resistance than other quenched steels with a hardness of 500 HB. This 8000 alloy uses a combination of fine distribution of microcarbides and an efficient work hardening in service to achieve wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as forming, machining, and joining. Filing Code: SA-580. Producer or source: Industeel USA, LLC.

WAUKESHA ALLOY 23

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Corrosion And Wear ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract WAUKESHA METAL NO. 23 is a nickel-base casting alloy having high resistance to corrosion, good machinability, and freedom from any tendency to seize or gall. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as machining and joining. Filing Code: Ni-49. Producer or source: Waukesha Foundry Company. Originally published January 1959, revised March 1993.

ARMCO PH 13-8Mo

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ARMCO PH 13-8Mo is designed for high-performance applications requiring high strength coupled with excellent resistance to corrosion and stress corrosion. It has excellent toughness, good transverse properties and excellent forgeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-224. Producer or source: Baltimore Specialty Steels Corporation. Originally published May 1969, revised February 1990.

MILNE CMV

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Tool Steel ◽  
Compression Strength ◽  
Heat Treating ◽  
Medium Carbon ◽  
Temperature Performance

Abstract Milne CMV is a 5% chromium, medium-carbon hot work tool steel, having high compression strength, wear resistance, and corrosion resistance. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-111. Producer or source: A. Milne & Company (Distributor).

ARMCO 410 Cb

Alloy Digest ◽  
1963 ◽  
Vol 12 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract Armco 410 Cb is a modified Type 410 corrosion resistant steel by the addition of columbium. It is extremely tough and impact resistant. It is a hardenable grade but less sensitive to tempering variables than Type 410. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-145. Producer or source: Armco Inc., Eastern Steel Division. See also Alloy Digest SS-261, October 1971.

CARPENTER MICRO-MELT A11-LVC

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Micro-Melt A11-LVC is a high-vanadium tool steel produced by the Carpenter Micro-Melt powder process. It provides higher toughness than Carpenter Micro-Melt A11 (Alloy Digest TS-571, January 2000) with lower wear resistance. It is used where slightly less wear resistance than that of Micro-Melt A11 is acceptable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-573. Producer or source: Carpenter.

DILLIDUR 500V

Alloy Digest ◽  
2012 ◽  
Vol 61 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Room Temperature ◽  
Surface Hardness ◽  
Heat Treating ◽  
Transport Systems ◽  
Resistant Steel ◽  
Wear Resistant

Abstract Dillidur 500V is a water hardened wear-resistant steel with surface hardness at room temperature of 470-530 HB. It has the highest wear resistance of the Dillidur steels. It is used in the production of transport systems, earth-moving plants, recycling plants, and stone crushers. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on wear resistance and surface qualities as well as forming, heat treating, machining, and joining. Filing Code: SA-641. Producer or source: Dillinger Hütte GTS.

ORION

Alloy Digest ◽  
1957 ◽  
Vol 6 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Wear Resistant ◽  
Temperature Performance ◽  
Strength And Toughness

Abstract Orion is a chromium-vanadium tool steel generally used where strength and toughness are of greater importance than extreme hardness. It is relatively shallow hardening, tough, and wear resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TS-54. Producer or source: Cyclops Corporation.

ESSHETE CRM2

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Resistant Steel ◽  
Temperature Performance ◽  
Oxidation Resistant ◽  
Corrosion And Oxidation ◽  
Temperature Applications

Abstract ESSHETE CRM2 is a low alloy corrosion and oxidation resistant steel suitable for moderately high 1100 F (593 C) temperature applications such as steam piping and superheater tubes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-220. Producer or source: Luria Steel & Trading Corporation (Agent).

THERMOLD H13

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H13 (formerly Thermold AV) is an air-hardening hot-work tool steel having good wear resistance and hot hardness at elevated temperature. Uniforged Rounds of THERMOLD H13 were developed especially for critically stressed extrusion tools and other hot-work tooling applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-241. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document