DOMEX 700W

Alloy Digest ◽  
2014 ◽  
Vol 63 (8) ◽  

Abstract Domex 700W is an extra high strength member of the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. The "W" signifies a weather-resistant steel. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SA-705. Producer or source: SSAB Swedish Steel Inc..

Alloy Digest ◽  
2013 ◽  
Vol 62 (12) ◽  

Abstract Domex 550W is an extra high strength member of the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The alloy is used in cold formed and welded products. The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. The "W" signifies a weather resistant steel. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-688. Producer or source: SSAB Swedish Steel Inc..


Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  

Abstract Domex 1200 is a member of the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The alloy is used in cold-formed and welded products and has a minimum yield strength of 1200 MPa (174 ksi). The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-605. Producer or source: SSAB Swedish Steel Inc.


Alloy Digest ◽  
2009 ◽  
Vol 58 (7) ◽  

Abstract Domex 960 is one fo the Domex family of cold-forming steels, which are thermomechanically rolled and where all the processing is carefully controlled. The alloy is used in cold-formed and welded products and has a minimum yield strength of 960 MPa (140 ksi). The Domex alloys are advanced high-strength steels that reduce the weight of heavy vehicles, trailers, cranes, and containers. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-603. Producer or source: SSAB Swedish Steel Inc.


Alloy Digest ◽  
1952 ◽  
Vol 1 (1) ◽  

Abstract Dowmetal ZK60A is an ageable extrusion alloy for use where high strength magnesium extrusions with good toughness are required. It has small grain size, low notch sensitivity and a relatively high resistance to stress corrosion. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-1. Producer or source: The Dow Chemical Company.


Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.


Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  

Abstract Republic 50 is a high-strength low-alloy structural steel recommended where high yield strength and toughness combined with good weldability and corrosion resistance are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bend strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-205. Producer or source: Republic Steel Corporation.


Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  

Abstract AW-TEN is a high-strength structural steel offering 50,000 psi minimum yield strength, good formability and weldability, and superior corrosion resistance. It is intended primarily for weight reduction and longer service life. It is recommended for automobile and truck bodies, buildings, bridges, railway cars, booms, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-199. Producer or source: Alan Wood Steel Company.


Alloy Digest ◽  
2009 ◽  
Vol 58 (4) ◽  

Abstract Domex 600MC is a hot-rolled, extra high-strength low-alloy (HSLA) steel for cold forming operations. It is available in thicknesses of 2.00-10.00 mm. The alloy meets or exceeds the requirements of S600MC in EN 10149-2. Applications include truck chassis, crane booms, and earthmoving machines. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-598. Producer or source: SSAB Swedish Steel Inc.


Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  

Abstract ARMCO VNT is a high-strength, low-alloy steel normalized for added toughness, ductility and uniformity. It is a silicon-killed, vanadium-nitrogen treated steel, made to fine-grain practive and provides a 60,000 psi minimum yield strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-260. Producer or source: Armco International Sales.


Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  

Abstract USS TRI-TEN is a high-strength low-alloy steel primarily intended to reduce weight, or to increase durability in applications involving cold forming, welding, and moderately severe impact loading. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-46. Producer or source: United States Steel Corporation. Originally published August 1956, revised May 1973.


Sign in / Sign up

Export Citation Format

Share Document