FIRTH VICKERS F.V. 520

Alloy Digest ◽  
1959 ◽  
Vol 8 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Heat Treating ◽  
Temperature Performance ◽  
Heat Treated ◽  
Temperature Heat ◽  
Temperature Heat Treatment

Abstract Firth-Vickers FV.520 is a chromium-nickel stainless steel that can be hardened by a low temperature heat treatment or supplied in a heat-treated, tough, but machinable condition with a tensile strength of 140,000 psi. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-84. Producer or source: Firth-Vickers Stainless Steels Ltd.

FIRTH VICKERS F.V. 520(S)

Alloy Digest ◽  
1968 ◽  
Vol 17 (4) ◽  
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Stainless Steels ◽  
Martensitic Steel ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Supersonic Aircraft ◽  
Temperature Performance ◽  
Temperature Heat ◽  
Temperature Heat Treatment

Abstract Fifth-Vickers F.V. 520(S) is a corrosion resistant martensitic steel which is readily weldable and capable of being hardened by low temperature heat treatment. It is recommended for turbine components and supersonic aircraft parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SS-208. Producer or source: Firth-Vickers Stainless Steels Ltd.

RA 17-4

Alloy Digest ◽  
2006 ◽  
Vol 55 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Martensitic Stainless Steel ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Corrosion Resistant ◽  
Temperature Heat ◽  
Temperature Heat Treatment

Abstract RA17-4 is a corrosion-resistant age-hardening martensitic stainless steel with high strength obtained by a simple low-temperature heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SS-963. Producer or source: Rolled Alloys.

JESSAIR

Alloy Digest ◽  
1965 ◽  
Vol 14 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Low Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Temperature Heat ◽  
Temperature Heat Treatment ◽  
Manganese Chromium

Abstract Jessair is a manganese, chromium, molybdenum alloy steel combining the deep harding characteristics of air-hardening steels with the simplicity of low temperature heat treatment possible in many oil-hardening steels. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-157. Producer or source: Jessop Steel Company.

AISI No. 633

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Martensitic Stainless Steels ◽  
Steel Mills ◽  
Temperature Performance ◽  
Structural Applications

Abstract AISI No. 633 is a chromium-nickel-molybdenum stainless steel whose properties can be changed by heat treatment. It bridges the gap between the austenitic and martensitic stainless steels; that is, it has some of the properties of each. Its uses include high-strength structural applications, corrosion-resistant springs and knife blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-389. Producer or source: Stainless steel mills.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

FIRTH-VICKERS F.V.520B

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
Martensitic Stainless Steel ◽  
Turbine Blades ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Temperature Heat ◽  
Steam Turbine Blades ◽  
Temperature Heat Treatment

Abstract F.V.520B is an improved martensitic stainless steel which has good corrosion resistance, weldability, and capacity of being hardened by low temperature heat treatment. It is recommended for steam turbine blades and aircraft components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-166. Producer or source: Firth-Vickers Stainless Steels Ltd.

VASCOMAX T-300

Alloy Digest ◽  
1990 ◽  
Vol 39 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
High Temperature ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Vacuum Arc Remelting ◽  
Temperature Performance

Abstract VASCOMAX T-300 is an 18% nickel maraging steel in which titanium is the primary strengthening agent. It develops a tensile strength of about 300,000 psi with simple heat treatment. The alloy is produced by Vacuum Induction Melting/Vacuum Arc Remelting. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-454. Producer or source: Teledyne Vasco.

UNILOY 430

Alloy Digest ◽  
1982 ◽  
Vol 31 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Elevated Temperature ◽  
Stainless Steels ◽  
Heat Treating ◽  
Storage Tanks ◽  
Good Resistance ◽  
Temperature Performance ◽  
Temperature Scaling

Abstract UNILOY 430 is a medium-chromium (17%) non-hardening, ferritic stainless steel. Of the AISI 400 series stainless steels, Uniloy 430 most nearly resembles the 18% chromium-8% nickel stainless steels in fabrication and service. It has excellent resistance to corrosion and good resistance to elevated-temperature scaling. Its many uses include architectural trim, nitric acid storage tanks and kitchen appliances. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-408. Producer or source: Cyclops.

ALLEGHENY METAL 350

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLEGHENY METAL 350 is a chromium-nickel-molybdenum stainless steel developed to bridge the gap between the 300 and 400 series. It can be hardened by heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-29. Producer or source: Allegheny Ludlum Corporation. Originally published May 1955, revised June 1963.

STAINLESS STEEL TYPE 303Pb

Alloy Digest ◽  
1960 ◽  
Vol 9 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Austenitic Steel ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Type ◽  
Temperature Performance

Abstract Stainless Steel Type 303Pb is a lead bearing, free-cutting, austenitic steel. It contains a nominal 18% Chromium, 8% Nickel and 0.3% free machining addition which is divided between lead and sulfur. This steel was designed for superior machinability to provide its users with increased production. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-110. Producer or source: Joslyn Stainless Steels.

Sign in / Sign up

Export Citation Format

Share Document