FERRO-TIC HT-2

Alloy Digest ◽  
1975 ◽  
Vol 24 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Powder Metal ◽  
Good Resistance ◽  
Alloy Matrix ◽  
Nickel Chromium ◽  
Resistance To Oxidation ◽  
American Corporation ◽  
Iron Nickel

Abstract FERRO-TIC HT-2 is a dispersion of extremely hard titanium carbide grains in an austenitic, heat-resistant, age-hardenable, iron-nickel-chromium alloy matrix. It exhibits good strength and good resistance to oxidation, corrosion, carburization and wear up to 1350 F. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as creep. It also includes information on corrosion resistance as well as heat treating, machining, joining, surface treatment, and powder metal forms. Filing Code: SS-322. Producer or source: Chromalloy American Corporation, Sintercast Division.

SANICRO 31HT

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Petrochemical Industry ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Iron Nickel

Abstract SANDVIK SANICRO 31HT is an austenitic iron-nickel-chromium alloy characterized by very good resistance to oxidation with good mechanical properties at elevated temperatures. It is recommended for resistance element sheathing, pyrometer tubes, airheaters, equipment for heat treating, furnace tubes, and other equipment in the petrochemical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-530. Producer or source: Sandvik.

NICROFER 7216 H

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Solution Treated ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 H is a solution-treated nickel-chromium-iron alloy with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-520. Producer or source: VDM Technologies Corporation.

NICROFER 7216

Alloy Digest ◽  
1996 ◽  
Vol 45 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 is a nickel-chromium-iron alloy, with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-518. Producer or source: VDM Technologies Corporation.

SANICRO 31

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Petrochemical Industry ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel ◽  
Corrosion And Oxidation

Abstract SANDVIK SANICRO 31 is an iron-nickel-chromium alloy having good resistance to corrosion and oxidation and good mechanical properties at elevated temperatures. It is recommended for electrical sheathing, pyrometer tubes, equipment for heat treating and furnace tubes and other equipment in the petrochemical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-172. Producer or source: Sandvik.

ALLEGHENY LUDLUM AL600 ALLOY

Alloy Digest ◽  
1989 ◽  
Vol 38 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Nickel Content ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Resistance To Oxidation

Abstract Allegheny Ludlum AL600 alloy is a nickel-chromium alloy designed for use from cryogenic up to 2000 F(1093 C) temperatures. Its nickel content provides resistance to reducing environments and stress-corrosion cracking. Its chromium affords resistance to mildly oxidizing conditions. It has excellent resistance to oxidation to about 2000 F(1093 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-370. Producer or source: Allegheny Ludlum Corporation.

ALLEGHENY A-286

Alloy Digest ◽  
1966 ◽  
Vol 15 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel

Abstract ALLEGHENY A-286 is an austenitic iron-nickel-chromium alloy designed for service up to 1300 F where high strength and corrosion resistance are required, and for service at higher temperatures where the applications are for lower stresses. It is an age-hardenable alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-4. Producer or source: Allegheny Ludlum Corporation. Originally published December 1952, revised September 1966.

CHROMAX Def. 520

Alloy Digest ◽  
1966 ◽  
Vol 15 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Nickel Chromium ◽  
High Oxidation ◽  
Iron Nickel

Abstract CHROMAX Def. 520 is an iron-nickel-chromium alloy having high oxidation and heat resistance. It is recommended for operations up to 1900 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-188. Producer or source: Driver-Harris Company.

PYROMET A-286

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Operating Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Jet Engines ◽  
Nickel Chromium ◽  
Iron Nickel ◽  
High Temperature Components

Abstract PYROMET A-286 is an age-hardenable austenitic iron-nickel-chromium alloy designed for service up to 1300 F (704 C) on jobs requiring high strength and good corrosion resistance at the operating temperature. It offers high ductility in notched sections. Pyromet A-286 is used in jet engines and superchargers for various high-temperature components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-340. Producer or source: Carpenter.

UNS N09706

Alloy Digest ◽  
1989 ◽  
Vol 38 (2) ◽  
Keyword(s):  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Iron ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Oxidation And Corrosion ◽  
Iron Chromium Alloy ◽  
Iron Chromium

Abstract UNS N09706 is a precipitation-hardenable, nickel-iron-chromium alloy with high strength at temperatures to 1200 F and with good resistance to oxidation and corrosion over a broad range of temperatures and environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-368. Producer or source: Nickel and nickel alloy producers.

NICROFER 6023

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
Heat Treating ◽  
Chemical Equipment ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Power Plant Equipment ◽  
Resistance To Oxidation ◽  
Plant Equipment

Abstract NICROFER 6023 is a nickel-chromium-iron alloy containing small quantities of aluminum. It has excellent resistance to oxidation at high temperatures, good resistance in oxidizing sulfur-bearing atmospheres and good resistance to carburizing conditions. The alloy has good mechanical properties at room and elevated temperatures. Its applications include heat treating furnace equipment, chemical equipment in various industries, and power plant equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-314. Producer or source: Vereingte Deutsche Metallwerke AG.

Sign in / Sign up

Export Citation Format

Share Document