TECH-TRONIC 32

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Iron Base Alloy ◽  
Nickel Chromium ◽  
Aisi Type ◽  
Cold Worked ◽  
Type 304

Abstract TECH-TRONIC 32 stainless steel is essentially a low-nickel chromium-manganese austenitic iron-base alloy. In the annealed condition it provides about twice the yield strength of AISI Type 304 stainless steel and almost the same resistance to corrosion. It also offers improved wear and galling resistance over standard stainless steels. TECH-TRONIC 32 can be cold worked to high strength levels with retention of good ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-348. Producer or source: Techalloy Company Inc..

NITRONIC 32

Alloy Digest ◽  
1975 ◽  
Vol 24 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Advanced Materials ◽  
304 Stainless Steel ◽  
Nickel Chromium ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract NITRONIC 32 is basically a low-nickel chromium-manganese austenitic stainless steel strengthened by an addition of nitrogen. It has annealed strength approximately two times that of AISI Type 304 stainless steel and comparable corrosion resistance. It is used in such applications as fasteners, springs, antennae, shafting and pole-line hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-320. Producer or source: Armco Steel Corporation, Advanced Materials Division.

OUTOKUMPU TYPE 630

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Outokumpu Type 630 is a martensitic age hardenable alloy of composition 17Cr-4Ni. The alloy has high strength and corrosion resistance similar to that of Type 304 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1238. Producer or source: Outokumpu High Performance Stainless.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304

Alloy Digest ◽  
1997 ◽  
Vol 46 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Project 70 and Project 7000 Type 304 stainless steel are versions of conventional AISI Type 304 (18Cr-8Ni) stainless steel having improved machinability and higher tensile and creep strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-418. Producer or source: Carpenter. Originally published January 1983, revised September 1997.

CARPENTER STAINLESS 22Cr-13Ni-5Mn

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Aisi Type ◽  
Cold Worked

Abstract CARPENTER STAINLESS 22Cr-13Ni-5Mn has very good corrosion resistance in combination with high strength. It has better corrosion resistance than AISI Type 316 stainless steel and approximately twice the yield strength. Carpenter 22Cr-13Ni-5Mn can be machined, cold worked and welded using the same equipment and methods used for the conventional AISI 300 series of stainless steels. It is nonmagnetic as annealed and after severe cold work. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-353. Producer or source: Carpenter.

CARPENTER STAINLESS 18-18 PLUS

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
High Temperature Strength ◽  
Cold Forming ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract CARPENTER STAINLESS 18-18 PLUS is an 18 chromium-18 manganese austenitic stainless steel which provides twice the yield strength of AISI Type 304 stainless steel and corrosion resistance similar to AISI Type 316 in some media. It has excellent ductility and toughness and good high-temperature strength. Although Carpenter 18-18 Plus contains no nickel, it is nonmagnetic both in the annealed condition and after severe cold forming. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-344. Producer or source: Carpenter.

AISI TYPE 204

Alloy Digest ◽  
1964 ◽  
Vol 13 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Corrosion Resistant ◽  
Steel Mills ◽  
Aisi Type ◽  
Type Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel ◽  
Nickel Manganese

Abstract AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

Sign in / Sign up

Export Citation Format

Share Document