UNILOY 13-8

Alloy Digest ◽  
1985 ◽  
Vol 34 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Cross Sections ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
General Corrosion ◽  
Aisi Type ◽  
Excellent Mechanical Property ◽  
Resistance To Stress ◽  
High Degree

Abstract UNILOY 13-8 has high strength, ductility and toughness in large cross sections in both longitudinal and transverse directions. The alloy has excellent mechanical property uniformity; this is the result of a well-balanced chemical composition. Because of its excellent general corrosion resistance (nearly equal to AISI Type 304 stainless steel) and its high degree of resistance to stress-corrosion cracking, it is used in a variety of environments. Typical uses are aircraft structural components, shafts, valve parts and fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-457. Producer or source: Cytemp Cyclops.

AMPCOLOY 83

Alloy Digest ◽  
1976 ◽  
Vol 25 (3) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Copper Base ◽  
Resistance To Wear ◽  
Copper Base Alloy

Abstract AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

DOWMETAL ZK60A

Alloy Digest ◽  
1952 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Grain Size ◽  
Corrosion Resistance ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Resistance To Stress ◽  
Extrusion Alloy

Abstract Dowmetal ZK60A is an ageable extrusion alloy for use where high strength magnesium extrusions with good toughness are required. It has small grain size, low notch sensitivity and a relatively high resistance to stress corrosion. This datasheet provides information on composition, physical properties, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-1. Producer or source: The Dow Chemical Company.

IN-102

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
International Nickel Company ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
High Degree

Abstract IN-102 is a nickel-chromium-iron alloy designed for long service at temperatures up to 1300 F. It combines high strength and high ductility at the elevated temperatures with a high degree of structural stability. It is used for aerospace, power and steam turbine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-147. Producer or source: International Nickel Company Inc..

CARPENTER STAINLESS No. 7-Mo

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Exchangers ◽  
Heat Treating ◽  
General Corrosion ◽  
Annealed Condition ◽  
Two Phase ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract CARPENTER STAINLESS No. 7-Mo is a two-phase alloy consisting of a ferritic matrix with pools of austenite. It has high resistance to stress-corrosion cracking and pitting, and good general corrosion resistance in many environments. Its principal use is for tubing and pipe in heat exchangers involving corrosive conditions. It is normally used in the annealed condition for maximum corrosion resistance and ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-298. Producer or source: Carpenter.

OUTOKUMPU TYPE 630

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Outokumpu Type 630 is a martensitic age hardenable alloy of composition 17Cr-4Ni. The alloy has high strength and corrosion resistance similar to that of Type 304 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1238. Producer or source: Outokumpu High Performance Stainless.

GIBSON TUBE DUPLEX 2205

Alloy Digest ◽  
2001 ◽  
Vol 50 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Heat Exchangers ◽  
Heat Treating ◽  
General Corrosion ◽  
Bend Strength ◽  
Duplex Alloy ◽  
Resistance To Stress ◽  
Desalination Plants

Abstract Duplex alloy 2205 is a nitrogen-enhanced, ferritic-austenitic stainless steel. It has high resistance to stress-corrosion cracking (SCC); pitting; crevice and general corrosion. It has roughly twice the yield strength of austenitic stainless grades and it has good weldability. Some uses include heat exchangers, downhole instrument tubing, and applications in desalination plants. All Gibson Tube Duplex 2205 products meet the tighter composition limits of UNS S32205 to enhance corrosion resistance. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-813. Producer or source: Gibson Tube.

AVESTA 2205 CODE PLUS TWO

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stress Corrosion ◽  
Heat Exchangers ◽  
High Strength ◽  
Heat Treating ◽  
Pressure Vessels ◽  
General Corrosion ◽  
Duplex Microstructure ◽  
Good Resistance ◽  
Desalination Plants

Abstract AVESTA 2205 is a ferritic-austenitic duplex stainless steel. It resists stress-corrosion cracking very well and has good pitting and general corrosion resistance. Its high strength and stress-corrosion resisting characteristics are a reflection of its duplex microstructure. Its uses include heat exchangers, desalination plants, and pressure vessels that need good resistance to corrosion. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-472. Producer or source: Avesta Sheffield Inc. Originally published July 1986, revised March 1993.

TECH-TRONIC 32

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Iron Base Alloy ◽  
Nickel Chromium ◽  
Aisi Type ◽  
Cold Worked ◽  
Type 304

Abstract TECH-TRONIC 32 stainless steel is essentially a low-nickel chromium-manganese austenitic iron-base alloy. In the annealed condition it provides about twice the yield strength of AISI Type 304 stainless steel and almost the same resistance to corrosion. It also offers improved wear and galling resistance over standard stainless steels. TECH-TRONIC 32 can be cold worked to high strength levels with retention of good ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-348. Producer or source: Techalloy Company Inc..

ARMCO 25-12

Alloy Digest ◽  
1955 ◽  
Vol 4 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
High Heat ◽  
Temperature Performance ◽  
Aisi Type ◽  
Lower Carbon

Abstract ARMCO 25-12 is an austenitic chromium-nickel stainless steel with high heat resisting qualities, high strength and creep values up to 2000 F. It is equivalent to AISI Type 309 stainless steel; and in the lower carbon grade is equivalent to AISI Type 309S. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-32. Producer or source: Armco Inc., Eastern Steel Division.

AVIALITE-915

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Aluminum Bronze

Abstract AVIALITE-915 is an aluminum bronze having high strength, hardness and excellent resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-86. Producer or source: American Brass Company.

Sign in / Sign up

Export Citation Format

Share Document