ALLEGHENY LUDLUM TYPE 317L, 317LX, 317LXN

Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Pitting Corrosion ◽  
Flue Gas ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Low Carbon ◽  
Austenitic Alloys ◽  
Service Conditions ◽  
Nitrogen Contents

Abstract TYPE 317L, 317LX, and 317LXN are austenitic alloys with varying molybdenum and nitrogen contents and thus have varying levels of resistance to pitting corrosion. All are low carbon to resist sensitization. All three alloys are intended for severe service conditions such as flue gas desulfurization systems. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-542. Producer or source: Allegheny Ludlum Corporation.

REMANIT 4539

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Flue Gas ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Low Carbon ◽  
Good Resistance ◽  
Carbon Corrosion ◽  
Corrosion Resistant

Abstract REMANIT 4539 is a low carbon corrosion resistant austenitic stainless steel with good levels of chromium, nickel, molybdenum, copper and nitrogen to show good resistance to reducing acids and chloride solutions. It was one of the early alloys used in flue gas desulfurization equipment. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-560. Producer or source: Thyssen Stahl AG.

AVESTA POLARIT 317LMN

Alloy Digest ◽  
2001 ◽  
Vol 50 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
Flue Gas ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Low Carbon ◽  
Temperature Performance

Abstract Avesta Polarit 317LMN is a low-carbon, higher-molybdenum austenitic steel frequently used for flue gas desulfurization service. The alloy is a fully austenitic stainless steel with excellent resistance to corrosion in chloride environments and nonoxidizing acids. It is significantly stronger than most low-carbon stainless steels and its structural stability makes for good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-465. Producer or source: AvestaPolarit AB. Originally published as Avesta Stainless 34LN, October 1985, revised July 2001.

B&W IRON

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Electric Motor ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Magnetic Characteristics ◽  
Low Carbon ◽  
High Magnetic Permeability

Abstract B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

NICROFER 5923 HMo-ALLOY 59

Alloy Digest ◽  
1993 ◽  
Vol 42 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Face Centered Cubic ◽  
Low Carbon ◽  
High Alloy ◽  
Temperature Performance ◽  
Cubic Structure ◽  
Face Centered

Abstract NICROFER 5923 hMo, often called Alloy 59, was developed with extra low carbon and silicon contents and with a high alloy level of molybdenum to optimize its corrosion resistance. Nicrofer 5923hMo has a face-centered cubic structure. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-430. Producer or source: VDM Technologies Corporation.

HPM 233

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Electronic Components

Abstract HPM 233 is a wrought nickel with low carbon. The alloy is used in electrical and electronic components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-635. Producer or source: Hamilton Precision Metals.

WIELAND-B18

Alloy Digest ◽  
2003 ◽  
Vol 52 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Service Conditions ◽  
Common Application

Abstract Wieland-B18 is a phosphor bronze with a composition that allows usage in slightly more severe service conditions than alloy B16 (UNS C52100). A common application is in slide bearings and slideways. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: CU-696. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

VALINOX VLX 439L

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Fresh Water ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Low Carbon ◽  
Boiler Water

Abstract VALINOX VLX 439L is a ferritic stainless steel with 18% chromium, low carbon, and titanium stabilization to present an entirely ferritic structure; resistance to corrosion in fresh water, boiler water, and cooling waters; and an almost freedom from stress-corrosion cracking problems due to chlorinated water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-531. Producer or source: Vallourec Inc..

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

URANUS 52N

Alloy Digest ◽  
1994 ◽  
Vol 43 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Flue Gas ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Flue Gas Desulfurization ◽  
Temperature Performance ◽  
Aisi Type ◽  
Better Than

Abstract URANUS 52N is a nitrogen-alloyed duplex stainless steel improved in stress-corrosion cracking resistance and with pitting and crevice corrosion resistance better than AISI Type 317L. Applications include handling phosphoric acid contaminated with chlorides and in flue gas desulfurization scrubbers. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-566. Producer or source: Creusot-Marrel.

Sign in / Sign up

Export Citation Format

Share Document