CARLSON NITRONIC 30

Alloy Digest ◽  
2001 ◽  
Vol 50 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Corrosive Wear ◽  
Aqueous Corrosion ◽  
Aisi Type ◽  
Metal Wear ◽  
Aqueous Corrosion Resistance ◽  
Type 304

Abstract Carlson alloy Nitronic 30 is a nitrogen-strengthened austenitic stainless steel providing aqueous corrosion resistance combined with resistance to abrasives and metal-to-metal wear. It has higher mechanical properties than standard austenitic grades and outstanding corrosive wear resistance under many different sliding conditions. Its galling resistance is equivalent to that of AISI Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-814. Producer or source: G.O. Carlson Inc.

GALL-TOUGH STAINLESS

Alloy Digest ◽  
1989 ◽  
Vol 38 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
High Temperature Oxidation ◽  
Heat Treating ◽  
Temperature Oxidation ◽  
Temperature Performance ◽  
Aisi Type ◽  
Metal Wear ◽  
Type 304

Abstract GALL-TOUGH Stainless is an austenitic stainless steel which possesses superior self-mated galling and metal-to-metal wear resistance. It is stronger and has better high-temperature oxidation resistance than AISI Type 304 stainless. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-510. Producer or source: Carpenter.

GALL-TOUGH PLUS STAINLESS

Alloy Digest ◽  
2007 ◽  
Vol 56 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
High Temperature Oxidation ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Temperature Oxidation ◽  
Temperature Performance ◽  
Aisi Type ◽  
Metal Wear ◽  
Type 304

Abstract Gall-Tough Plus Stainless is a modification and improvement of Gall-Tough (Alloy Digest SS-510, November 1989). Gall-Tough Plus stainless is an austenitic stainless steel that possesses superior self-mated galling and metal-to-metal wear resistance. It is stronger and has better high-temperature oxidation resistance than AISI Type 304 stainless. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-986. Producer or source: Carpenter Specialty Alloys.

REYNOLDS 390 and A390

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Temperature Performance

Abstract REYNOLDS 390 and A390 are hypereutectic aluminum-silicon alloys having excellent wear resistance coupled with good mechanical properties, high hardness, and low coefficients of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-203. Producer or source: Reynolds Metals Company.

AISI TYPE 308

Alloy Digest ◽  
1963 ◽  
Vol 12 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Nickel Steel ◽  
Steel Mills ◽  
Aisi Type ◽  
Type 304

Abstract AISI Type 308 is an austenitic chromium nickel steel with corrosion and heat resistance superior to Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-140. Producer or source: Alloy steel mills and foundries.

AK STEEL TYPE 304L

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Stress Relief ◽  
Carbide Precipitation ◽  
Low Carbon ◽  
Steel Type ◽  
Temperature Performance ◽  
Type 304

Abstract AK Steel Type 304L is a chromium-nickel austenitic stainless steel. It is an extra low-carbon variation of Type 304 with a 0.030% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the “as-welded” condition, even in severe corrosive conditions. In many cases it eliminates the necessity of annealing weldments except for applications specifying stress relief. Type 304L has slightly lower mechanical properties than Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance, corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1324. Producer or Source: AK Steel Corporation.

EASTERN STAINLESS TYPE 304L

Alloy Digest ◽  
1983 ◽  
Vol 32 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Carbon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Aisi Type ◽  
Type 304

Abstract EASTERN STAINLESS TYPE 304L is the basic 18-8 chromium-nickel austenitic stainless steel with a very low carbon content (0.03% max.). Its general resistance to corrosion is similar to AISI Type 304 but, because of its low carbon content, it has superior resistance to the formation of harmful carbides that indirectly contribute to intergranular corrosion. It is recommended for most articles of welded construction. Postweld annealing is not necessary. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-427. Producer or source: Eastern Stainless Steel Company.

OUTOKUMPU MODA 430/4016

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Ferritic Stainless Steel ◽  
Heat Treating ◽  
Steel Grade ◽  
Good Corrosion Resistance ◽  
304 Austenitic Stainless Steel ◽  
Corrosive Environments ◽  
Type 304

Abstract OUTOKUMPU MODA 430/4016 is a 16% chromium ferritic stainless steel that combines good mechanical properties with good corrosion resistance and heat and oxidation resistance up to 815 °C (1500 °F). It is the most commonly used ferritic stainless steel grade and can be used to replace type 304 austenitic stainless steel in certain applications. It is best suited for mildly corrosive environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1340. Producer or source: Outokumpu Oyj.

LDX 2404

Alloy Digest ◽  
2011 ◽  
Vol 60 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type 304

Abstract LDX 2404 is a lean duplex stainless with molybdenum and high mechanical properties. It is designed to replace Type 304/304L in many applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1090. Producer or source: Outokumpu Stainless Inc..

UGI 4062

Alloy Digest ◽  
2017 ◽  
Vol 66 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Aisi Type ◽  
Stress Corrosion Resistance ◽  
Type 304

Abstract UGI 4062 is a duplex ferritic/austenitic stainless steel with good general resistance to corrosion, improved mechanical strength, and improved stress-corrosion resistance compared to AISI Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1274. Producer or source: Schmolz + Bickenbach USA Inc..

AQUAMET 18

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Heat Treating ◽  
Advanced Materials ◽  
Aisi Type ◽  
Seawater Corrosion ◽  
Type 304 ◽  
Better Than

Abstract AQUAMET 18 is a low-nickel austenitic stainless steel having seawater corrosion resistance better than AISI Type 304 and approaching that of AISI Type 316 stainless steel. Its good strength and super toughness make it an ideal material for pleasure and work boats. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-332. Producer or source: Armco Steel Corporation, Advanced Materials Division.

Sign in / Sign up

Export Citation Format

Share Document