CARTECH Ti-3Al-8V-6Cr-4Mo-4Zr (BETA C)

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Minimum Weight ◽  
High Strength ◽  
Heat Treating ◽  
Beta Alloy ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Metastable Beta ◽  
Good Workability

Abstract CarTech Ti-3Al-8V-6Cr-4Mo-4Zr, also known as Ti-3-8-6-4-4 and Beta C, is a metastable beta alloy used in the solution heat treated or solution heat treated and aged condition. It is appropriate for applications where very high strength, minimum weight, and corrosion resistance are important. Ti-3Al-8V-6Cr-4Mo-4Zr has gained in popularity among beta alloys because it is easier to melt and process, exhibiting low segregation, good workability, and good heat-treating properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-172. Producer or source: Carpenter Technology Corporation.

CARTECH Ti 15V-3Cr-3Sn-3Al

Alloy Digest ◽  
2021 ◽  
Vol 70 (7) ◽  
Keyword(s):  
High Strength ◽  
Heat Treating ◽  
Beta Titanium Alloy ◽  
Treated Condition ◽  
Beta Titanium ◽  
Heat Treated ◽  
Technology Corporation ◽  
Heat Treated Condition ◽  
Carpenter Technology Corporation ◽  
Metastable Beta

Abstract CarTech Ti 15V-3Cr-3Sn-3Al (UNS R58153) is a metastable beta titanium alloy that offers substantial weight reduction in comparison with other engineering materials. If used in the solution heat treated condition, the alloy has excellent cold formability. In the aged condition, the alloy has high strength. It is acceptable for use up to 230 °C (550 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-180. Producer or source: Carpenter Technology Corporation.

PYROMET 355

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Gas Turbine Compressor

Abstract Carpenter Pyromet 355 is a chromium nickel-molybdenum stainless steel which can be heat treated to high strength levels. It is recommended for gas turbine compressor parts where high strength is required at intermediate elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-213. Producer or source: Carpenter Technology Corporation.

Ti 3Al-8V-6Cr-4Mo-4Zr

Alloy Digest ◽  
2002 ◽  
Vol 51 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Shear Strength ◽  
High Temperature ◽  
Heat Treating ◽  
Temperature Performance ◽  
Beta Alloy ◽  
Heat Treated ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Carpenter titanium alloy Ti 3Al-8V-6Cr-4Mo-4Zr, or Ti-3-8-6-4-4, is a beta alloy that contains large amounts of beta stabilizers (molybdenum and vanadium) and can be heat treated. The alloy is commonly known as Beta C. A specialized application for this alloy is aircraft springs. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-130. Producer or source: Carpenter Technology Corporation.

PYROTOOL W

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROTOOL W has been designed to possess high strength and hardness at temperatures up to 1500 F (816 C). Applications include high-temperature tooling, extrusion dies, dummy blocks, rings, holders, forging dies and mandrels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-161. Producer or source: Carpenter Technology Corporation.

CARPENTER Ti 6Al-4V

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Heat Treating ◽  
Bearing Strength ◽  
Aerospace Applications ◽  
Temperature Performance ◽  
Beta Alloy ◽  
Heat Treated ◽  
Technology Corporation ◽  
Alpha Beta ◽  
Carpenter Technology Corporation

Abstract Carpenter titanium alloy 6Al-4V is an alpha-beta alloy that contains alpha and beta stabilizers and can be heat treated. This alloy accounts for more than 50% of total titanium usage, mostly in aerospace applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TI-60. Producer or source: Carpenter Technology Corporation. Originally published as Carpenter Titanium 6-4, October 1970, revised August 2002.

CARPENTER CUSTOM 475

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Small Diameter ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Peak Aged ◽  
Carpenter Technology Corporation

Abstract Custom 475 stainless is a premium melted, high-strength, martensitic, precipitation-hardenable stainless steel. It provides good corrosion resistance and was designed to achieve a tensile strength up to 2000 MPa (290 ksi), combined with good toughness and ductility when in the H975 condition, peak aged at 525 deg C (975 deg F). Other combinations of strength are possible by applying aging temperatures up to 595 deg C (1100 deg F). The alloy is available in strip, wire, and small diameter bar. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-974. Producer or source: Carpenter Technology Corporation.

CARPENTER ALLOY 925

Alloy Digest ◽  
2007 ◽  
Vol 56 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Technology Corporation ◽  
Resistance To Stress ◽  
Carpenter Technology Corporation

Abstract Carpenter Alloy 925 is an age-hardenable Ni-Fe-Cr alloy designed to resist corrosion while providing high strength. A combination of copper, titanium, molybdenum, and aluminum, in conjunction with nickel, provides excellent resistance to stress-corrosion cracking, pitting and crevice corrosion, and oxidizing and reducing environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-652. Producer or source: Carpenter Technology Corporation.

CARPENTER CP TITANIUM GRADE 4

Alloy Digest ◽  
2002 ◽  
Vol 51 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nickel Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Fatigue Properties ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Titanium Grade ◽  
Carpenter Technology Corporation

Abstract Carpenter CP Titanium Grade 4 is the highest-strength grade of the unalloyed grades 1-4. It competes with steels and nickel alloys with its combination of corrosion resistance, fatigue properties, and high strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-128. Producer or source: Carpenter Technology Corporation.

CARPENTER TEMPER TOUGH ALLOY

Alloy Digest ◽  
2012 ◽  
Vol 61 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Toughness ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Quenched And Tempered Steel

Abstract Temper Tough alloy is an air-melted quenched and tempered steel with high strength and high toughness. This datasheet provides information on composition, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-650. Producer or source: Carpenter Technology Corporation.

PYROMET 350

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Gas Turbine ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET 350 is a chromium-nickel-molybdenum stainless steel that can be hardened by transformation to martensite and/or preciptation hardening. It is used for gas turbine components and similar parts where high strength is required at room intermediate temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-296. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document