COMMERCIALLY PURE TITANIUM GRADE 12

Alloy Digest ◽  
1989 ◽  
Vol 38 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Formic Acid ◽  
Chemical Industry ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Titanium Grade

Abstract Commercially pure wrought titanium, Grade 12 is used in the chemical industry where conditions are mildly reducing or varying between oxidizing and reducing. It is immune to formic acid, aerated or non-aerated. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-93. Producer or source: Titanium alloy mills. Originally published August 1989, revised September 1989.

COMMERCIALLY PURE TITANIUM GRADE 4

Alloy Digest ◽  
1989 ◽  
Vol 38 (5) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Physical Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Titanium Grade

Abstract Titanium Development Association commercially pure wrought titanium, Grade 4 is used in equipment where resistance to corrosion in chemical, marine and other industries is required. At a guaranteed 80,000 psi minimum mill annealed tensile strength, titanium Grade 4 is the strongest of the commercially pure grades. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-92. Producer or source: Titanium alloy mills.

RMI 0.2% Pd

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Crevice Corrosion ◽  
Elevated Temperatures ◽  
Pure Titanium ◽  
Heat Treating ◽  
Low Ph ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 0.2% Pd is a grade of commercially pure titanium to which up to 0.2% palladium has been added. It has a guaranteed minimum yield strength of 40,000 psi with good ductility and formability. It is recommended for corrosion resistance in the chemical industry and other places where the environment is mildly reducing or varies between oxidizing and reducing. The alloy has improved resistance to crevice corrosion at low pH and elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-74. Producer or source: RMI Company.

UPM CP TITANIUM GRADE 3 (UNS R50550)

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service ◽  
Pure Grade ◽  
Grade 3 ◽  
Titanium Grade ◽  
Design Stress

Abstract UPM CP Titanium Grade 3 (UNS R50550) is an unalloyed commercially pure titanium that exhibits moderate strength (higher strength than that of Titanium Grade 2), along with excellent formability and corrosion resistance. It offers the highest ASME allowable design stress of any commercially pure grade of titanium, and can be used in continuous service up to 425 °C (800 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-167. Producer or source: United Performance Metals.

MST 3Al-2.5V

Alloy Digest ◽  
1959 ◽  
Vol 8 (4) ◽  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Elevated Temperature ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Elevated Temperature Strength ◽  
Temperature Performance ◽  
Commercially Pure

Abstract MST 3A1-2.5V is a highly weldable titanium alloy having greater room and elevated temperature strength with greater flarability than commercially pure titanium. It is also age-hardenable. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ti-18. Producer or source: Mallory-Sharon Metals Company.

L. KLEIN TITAN GRADE 2

Alloy Digest ◽  
2021 ◽  
Vol 70 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service ◽  
Titanium Grade ◽  
Service Environments

Abstract L. Klein Titan Grade 2 is an unalloyed, commercially pure titanium grade. It is the most widely used commercially pure titanium grade. It offers a combination of moderate strength and good ductility, with outstanding corrosion resistance in many challenging service environments. L. Klein Titan Grade 2 can operate in continuous service up to 425 °C (800 °F) and in intermittent service up to 540 °C (1005 °F). This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-177. Producer or source: L. Klein SA.

AUSTRAL WRIGHT TITANIUM GRADE 2 (UNS R50400)

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service ◽  
Titanium Grade

Abstract Austral Wright Titanium Grade 2 (UNS R50400) is an unalloyed, commercially pure titanium grade. It is the most widely used commercially pure titanium grade. It offers a combination of moderate strength (similar to that of austenitic stainless steels), good formability, outstanding corrosion resistance, and good weldability. Austral Wright Titanium Grade 2 can operate in continuous service up to 425 °C (800 °F) and in intermittent service up to 540 °C (1005 °F). This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-183. Producer or source: Austral Wright Metals.

ULBRICH TITANIUM GRADE 2 (UNS R50400)

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service ◽  
Titanium Grade ◽  
Service Environments

Abstract Ulbrich Titanium Grade 2 (UNS R50400) is an unalloyed commercially pure titanium. It is the most widely used commercially pure titanium grade. It offers a combination of moderate strength and good ductility, with outstanding corrosion resistance in many challenging service environments. Titanium Grade 2 can operate in continuous service up to 425 °C (800 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-168. Producer or source: Ulbrich Stainless Steels & Special Metals, Inc.

UPM CP TITANIUM GRADE 4

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service ◽  
Titanium Grade ◽  
Minimum Yield

Abstract UPM CP Titanium Grade 4 (UNS R50700) is an unalloyed commercially pure titanium. It is the strongest of the four unalloyed commercially pure (CP) titanium grades, with a minimum yield strength of 480 MPa (70 ksi). This material exhibits good ductility, moderate formability, and excellent resistance to corrosion and corrosion fatigue. It can be used in continuous service at temperatures up to 425 °C (800 °F), and in intermittent service at 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-181. Producer or source: United Performance Metals.

RMI 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (4) ◽  
Keyword(s):  
Yield Strength ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

BIBUS METALS TITAN GRADE 1

Alloy Digest ◽  
2021 ◽  
Vol 70 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Commercially Pure ◽  
Continuous Service

Abstract Bibus Metals Titan Grade 1 is an unalloyed commercially pure titanium. It has the highest purity, lowest strength, and best ductility and formability of the four ASTM unalloyed titanium grades. This grade has excellent resistance to corrosion in highly oxidizing to mildly reducing environments, including chlorides. Bibus Metals Titan Grade 1 can be used in continuous service up to 425 °C (795 °F) and in intermittent service up to 540 °C (1000 °F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-184. Producer or source: Bibus Metals AG.

Sign in / Sign up

Export Citation Format

Share Document