MST 3Al-2.5V

Alloy Digest ◽  
1959 ◽  
Vol 8 (4) ◽  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Elevated Temperature ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Elevated Temperature Strength ◽  
Temperature Performance ◽  
Commercially Pure

Abstract MST 3A1-2.5V is a highly weldable titanium alloy having greater room and elevated temperature strength with greater flarability than commercially pure titanium. It is also age-hardenable. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ti-18. Producer or source: Mallory-Sharon Metals Company.

RMI 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (4) ◽  
Keyword(s):  
Yield Strength ◽  
Stainless Steels ◽  
Pure Titanium ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

CRUCIBLE A-70

Alloy Digest ◽  
1971 ◽  
Vol 20 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Specialty Metals

Abstract CRUCIBLE A-70 is a grade of commercially pure titanium that is used where higher strength is required than is achieved with grade A-55. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-63. Producer or source: Crucible Specialty Metals Division, Colt Industries.

COMMERCIALLY PURE TITANIUM GRADE 12

Alloy Digest ◽  
1989 ◽  
Vol 38 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Formic Acid ◽  
Chemical Industry ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Titanium Grade

Abstract Commercially pure wrought titanium, Grade 12 is used in the chemical industry where conditions are mildly reducing or varying between oxidizing and reducing. It is immune to formic acid, aerated or non-aerated. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-93. Producer or source: Titanium alloy mills. Originally published August 1989, revised September 1989.

Ti-35A and Ti-50A

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Temperature Performance ◽  
Commercially Pure

Abstract Ti-35A and Ti-50A are commercially pure titanium grades with guaranteed minimum tensile strengths of 35000 psi and 50,000 psi, respectively. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-65. Producer or source: Titanium Metals Corporation of America.

TIMETAL 50A

Alloy Digest ◽  
2001 ◽  
Vol 50 (9) ◽  
Keyword(s):  
Electrical Resistance ◽  
Chemical Process ◽  
Room Temperature ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Complex Shapes

Abstract TIMETAL 50A is a commercially pure titanium alloy with a minimum tensile strength of 345 MPa (50 ksi). It is readily formed at room temperature, although complex shapes must be warm formed for satisfactory results. This material is weldable by both electrical resistance and fusion procedures, although the latter methods can be used only if the material is protected from atmospheric contamination. This grade is used in airframe and chemical process applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-120. Producer or source: Timet.

COMMERCIALLY PURE TITANIUM GRADE 4

Alloy Digest ◽  
1989 ◽  
Vol 38 (5) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Physical Properties ◽  
Pure Titanium ◽  
Heat Treating ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Titanium Grade

Abstract Titanium Development Association commercially pure wrought titanium, Grade 4 is used in equipment where resistance to corrosion in chemical, marine and other industries is required. At a guaranteed 80,000 psi minimum mill annealed tensile strength, titanium Grade 4 is the strongest of the commercially pure grades. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-92. Producer or source: Titanium alloy mills.

TIMETAL 65A

Alloy Digest ◽  
2010 ◽  
Vol 59 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Pure Titanium ◽  
Weight Ratio ◽  
Heat Treating ◽  
General Purpose ◽  
Commercially Pure Titanium ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Excellent Corrosion Resistance

Abstract TIMETAL 65A is a general purpose grade of commercially pure titanium that has excellent corrosion resistance to highly oxidating to mildly reducing environments, including chlorides, and an excellent strength-to-weight ratio. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TI-147. Producer or source: Timet.

RMI 0.2% Pd

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Crevice Corrosion ◽  
Elevated Temperatures ◽  
Pure Titanium ◽  
Heat Treating ◽  
Low Ph ◽  
Commercially Pure Titanium ◽  
Bend Strength ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 0.2% Pd is a grade of commercially pure titanium to which up to 0.2% palladium has been added. It has a guaranteed minimum yield strength of 40,000 psi with good ductility and formability. It is recommended for corrosion resistance in the chemical industry and other places where the environment is mildly reducing or varies between oxidizing and reducing. The alloy has improved resistance to crevice corrosion at low pH and elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-74. Producer or source: RMI Company.

ALUMINUM 224.0

Alloy Digest ◽  
1970 ◽  
Vol 19 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Elevated Temperature ◽  
Heat Treating ◽  
Aluminum Casting ◽  
Elevated Temperature Strength ◽  
Casting Alloys ◽  
Temperature Performance ◽  
Aluminum Company

Abstract ALUMINUM 224.0 was developed for the production of sand and composite mold castings which will meet substantially higher elevated temperature strength requirements than other aluminum casting alloys. This datasheet provides information on composition, physical properties, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-200. Producer or source: Aluminum Company of America.

Ti-7Al-12Zr

Alloy Digest ◽  
1965 ◽  
Vol 14 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Creep Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance ◽  
Reactive Metals ◽  
Alpha Type

Abstract Ti-7AI-12Zr is an alpha-type titanium alloy recommended for high temperature applications in the 800-1100 F range where minimum creep and high Creep strength are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-46. Producer or source: Reactive Metals Corporation.

Sign in / Sign up

Export Citation Format

Share Document