STAR-MO M-2

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Tool Life ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Aisi Type ◽  
Red Hardness

Abstract STAR-M0 M-2 is a tungsten-molybdenum high-speed steel of the 6-6-2 type having good red-hardness quality. This alloy corresponds to AISI type M2. Star-M0 is also available in Free-Machining type, to which sulfur, in the form of alloy sulphides, has been added for better machinability and increased tool life. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness, and deformation. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-112. Producer or source: Firth Sterling Corporation.

ELECTRITE No. 1 and No. 1XL

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness

Abstract ELECTRITE No. 1 is a standard 18.4-1 type high-speed steel having high density, extremely good wear resisting properties. It possesses a high red hardness when used for cutting and shearing tools. It corresponds to AISI Type T1 Tool Steel. This same type steel is also supplied containing sulphide additive and is called Electrite No. 1 XL. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-62. Producer or source: Latrobe Steel Company.

MOTUNG 652

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sulfur Content ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Machining Properties

Abstract MOTUNG 652 is an intermediate molybdenum-tungsten type of high-speed steel conforming to the M-2 analysis. It is available with normal sulfur content or with high sulfur for free machining properties. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-61. Producer or source: Cyclops Corporation.

VASCO M-2

Alloy Digest ◽  
1959 ◽  
Vol 8 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Bend Strength ◽  
Steel Company ◽  
Vanadium Alloys ◽  
Resistance To Wear

Abstract VASCO M-2 is a general purpose high-speed steel of the tungsten-molybdenum type. The steel combines to an excellent degree resistance to wear toughness. Not particularly susceptible to decarburization. This datasheet provides information on composition, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-7. Producer or source: Vanadium Alloys Steel Company. Originally published June 1953, revised June 1959.

ELECTRITE CO-6

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Elevated Temperatures ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness ◽  
Cobalt Addition

Abstract ELECTRITE CO-6 is a high-speed steel of the 6 molybdenum-6 tungsten type to which 9% cobalt has been added. This cobalt addition increases the red hardness and permits a retention of greater cutting hardness at elevated temperatures. It is designated as SAE-M36 and AISI Type M36. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-35. Producer or source: Latrobe Steel Company. Originally published July 1955, revised June 1963.

PANTHER 5

Alloy Digest ◽  
1976 ◽  
Vol 25 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Life ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Maximum Hardness ◽  
High Carbon ◽  
Red Hardness ◽  
Cutting Speeds

Abstract Panther 5 is a 5% cobalt, high-carbon, high-vanadium, tungsten high-speed steel. Because of its excellent red hardness, higher cutting speeds can be used with Panther 5 than with the regular high-speed steels. Heat treating Panther 5 to its maximum hardness will provide long tool life. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-301. Producer or source: Allegheny Ludlum Corporation.

AISI TYPE T15

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Red Hardness

Abstract AISI type T15 is a cobalt type high-speed steel having maximum abrasion resistance and red hardness. It is recommended for all types of cutting tools where the machining operation is different and extreme. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-206. Producer or source: Tool steel mills.

AISI TYPE M1

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Heavy Duty ◽  
Steel Mills ◽  
Aisi Type ◽  
Red Hardness

Abstract AISI Type M1 is a general-purpose high-molybdenum, low-tungsten type of high-speed tool steel. It has an excellent combination of cutting ability, toughness and finishing properties. Its cutting ability is good except for heavy-duty, continuous cutting operations where the ultimate in red-hardness is required. Its toughness is as great as that of any other high-speed steel. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-314. Producer or source: Tool steel mills.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

RED CUT COBALT

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Cast Iron ◽  
High Speed ◽  
Elevated Temperatures ◽  
High Speed Steel ◽  
Heat Treating ◽  
High Speeds ◽  
Red Hardness ◽  
Nonferrous Alloys ◽  
Cutting Point

Abstract RED CUT COBALT steel is made by adding 5% cobalt to the conventional 18% tungsten -4% chromium-1% vanadium high-speed steel. Cobalt increases hot or red hardness and thus enables the tool to maintain a higher hardness at elevated temperatures. This steel is best adapted for hogging cuts or where the temperature of the cutting point of the tool in increased greatly. It is well adapted for tools to be used for reaming cast-iron engine cylinders, turning alloy steel or cast iron and cutting nonferrous alloys at high speeds. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-367. Producer or source: Teledyne Vasco.

TATMO V-N

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Nitrogen Addition ◽  
Aisi Type ◽  
End Mills ◽  
Red Hardness ◽  
Edge Toughness

Abstract TATMO V-N is an AISI Type M7 high-speed steel modified by alloy balancing and a nitrogen addition to develop superior hardness response in heat treatment. It is an excellent grade for many cutting-tool applications requiring an optimum balance of red hardness, edge toughness and wear resistance, such as drills, taps, end mills, reamers and milling cutters. Its combination of outstanding properties and high hardness makes Tatmo V-N a logical alternate for cobalt high-speed steels in many cutting-tool applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-452. Producer or source: Latrobe Steel Company.

Sign in / Sign up

Export Citation Format

Share Document