TATMO V-N

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Nitrogen Addition ◽  
Aisi Type ◽  
End Mills ◽  
Red Hardness ◽  
Edge Toughness

Abstract TATMO V-N is an AISI Type M7 high-speed steel modified by alloy balancing and a nitrogen addition to develop superior hardness response in heat treatment. It is an excellent grade for many cutting-tool applications requiring an optimum balance of red hardness, edge toughness and wear resistance, such as drills, taps, end mills, reamers and milling cutters. Its combination of outstanding properties and high hardness makes Tatmo V-N a logical alternate for cobalt high-speed steels in many cutting-tool applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-452. Producer or source: Latrobe Steel Company.

CPM REX 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
High Speeds ◽  
Aisi Type ◽  
Tool Performance ◽  
End Mills ◽  
Machining Operations

Abstract CPM REX 25 is a super high-speed steel made without cobalt. It is comparable to AISI Type T15 cobalt-containing high-speed steel in response to heat treatment, properties, and tool performance. CPM REX 25 is recommended for machining operations requiring heavy cuts, high speeds and feeds, and difficult-to-machine materials of high hardness and abrasion resistance. Typical applications are boring tools, drills, gear cutters, punches, form tools, end mills and broaches. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-365. Producer or source: Crucible Materials Corporation.

AISI TYPE M33

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Mills ◽  
Aisi Type ◽  
Heat Treated ◽  
Aircraft Alloys ◽  
Red Hardness

Abstract AISI Type M33 is a heavy-duty high-speed steel; it contains 8.00% cobalt to improved red hardness. It is recommended for cutting-tool applications in which wear resistance and high temperature hardness are important characteristics. It should not be used where excessive shock and/or chatter are encountered. AISI Type M33 is well suited to uses such as machining hard and heat-treated materials and machining both ferrous and nonferrous aircraft alloys. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-402. Producer or source: Tool steel mills.

AISI TYPE M42

Alloy Digest ◽  
1987 ◽  
Vol 36 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
High Speed ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Heat Treated ◽  
Edge Toughness ◽  
Hot Hardness

Abstract AISI Type M42 is capable of being heat treated to Rockwell C 68-70; in fact, it is a super high-speed steel. Its combination of composition and properties makes it suitable for machining high-hardness alloys and difficult-to-machine superalloys. Excellent wear resistance and high hot hardness are obtained in Type M42 without loss of cuttting-edge toughness. Typical tools made from this steel are broaches, drills, gear cutters and milling cutters. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-476. Producer or source: Tool steel mills.

AISI TYPE M7

Alloy Digest ◽  
1987 ◽  
Vol 36 (1) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Cutting Efficiency ◽  
Steel Mills ◽  
Aisi Type ◽  
End Mills ◽  
Twist Drills ◽  
Toughness Characteristic

Abstract AISI Type M7 is a molybdenum type of high-speed steel having improved cutting efficiency over AISI Type M1 high-speed steel. Type M7 was designed to offer increased wear resistance while retaining the toughness characteristic of molybdenum-type high-speed steels. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is desired. Typical applications include twist drills, end mills, form tools, reamers and milling cutters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-468. Producer or source: Tool steel mills. See also Alloy Digest TS-483, October 1987.

GUTERL M-7

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Significant Loss ◽  
Aisi Type ◽  
End Mills ◽  
Twist Drills

Abstract GUTERL M-7 is a molybdenum type of high-speed steel. It is somewhat similar to AISI Type M1 tool steel but with higher percentages of carbon and vanadium to provide an improvement over M1 in cutting characteristics without a significant loss in toughness. It is used widely for cutting-tool applications that require improved resistance to abrasion. Its many uses include reamers, twist drills, taps, lathe tools, end mills and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-370. Producer or source: Guterl Special Steel Corporation.

AISI TYPE M7

Alloy Digest ◽  
1987 ◽  
Vol 36 (10) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Significant Loss ◽  
Steel Mills ◽  
Aisi Type ◽  
End Mills ◽  
The Many ◽  
Twist Drills

Abstract AISI Type M7 is a molybdenum type of high-speed steel. It is somewhat similar to AISI Type M1 tool steel but with higher percentages of carbon and vanadium to provide an improvement over AISI Type M1 in cutting characteristics without a significant loss in toughness. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is required. The many uses of Type M7 include twist drills, end mills, shear blades, punches, milling cutters, lathe tools, taps and reamers. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-483. Producer or source: Tool steel mills. See also Alloy Digest TS-468, January 1987.

ELECTRITE No. 1 and No. 1XL

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness

Abstract ELECTRITE No. 1 is a standard 18.4-1 type high-speed steel having high density, extremely good wear resisting properties. It possesses a high red hardness when used for cutting and shearing tools. It corresponds to AISI Type T1 Tool Steel. This same type steel is also supplied containing sulphide additive and is called Electrite No. 1 XL. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-62. Producer or source: Latrobe Steel Company.

ELECTRITE CO-6

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Elevated Temperatures ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness ◽  
Cobalt Addition

Abstract ELECTRITE CO-6 is a high-speed steel of the 6 molybdenum-6 tungsten type to which 9% cobalt has been added. This cobalt addition increases the red hardness and permits a retention of greater cutting hardness at elevated temperatures. It is designated as SAE-M36 and AISI Type M36. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-35. Producer or source: Latrobe Steel Company. Originally published July 1955, revised June 1963.

SUPER STAR

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Edge Toughness ◽  
Hot Hardness

Abstract SUPER STAR is a super high-speed steel capable of being treated to high hardness levels. Its combination of composition and properties facilitates the machining of high-hardness materials and difficult-to-machine superalloys. Excellent hot hardness and wear resistance are obtained in Super Star without loss of edge toughness. This datasheet provides information on composition and hardness as well as deformation. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-283. Producer or source: Carpenter.

AL TECH SUPER LMW-EXTRA

Alloy Digest ◽  
1981 ◽  
Vol 30 (10) ◽  
Keyword(s):  
High Temperature ◽  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Heat Treated ◽  
Aircraft Alloys ◽  
Red Hardness ◽  
Specialty Steel

Abstract AL Tech Super LMW-Extra is high-molybdenum high-speed steel containing 8.25% cobalt to improved red hardness. It is most useful for cutting-tool applications in which wear resistance and high-temperature hardness are important properties. This grade should not be use where excessive shock or chatter are encountered. Super LMW-Extra is well suited to applications such as machining hard and heat-treated materials and machining both ferrous and nonferrous aircraft alloys. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: TS-388. Producer or source: AL Tech Specialty Steel Corporation.

Sign in / Sign up

Export Citation Format

Share Document