AISI TYPE M7

Alloy Digest ◽  
1987 ◽  
Vol 36 (1) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Cutting Efficiency ◽  
Steel Mills ◽  
Aisi Type ◽  
End Mills ◽  
Twist Drills ◽  
Toughness Characteristic

Abstract AISI Type M7 is a molybdenum type of high-speed steel having improved cutting efficiency over AISI Type M1 high-speed steel. Type M7 was designed to offer increased wear resistance while retaining the toughness characteristic of molybdenum-type high-speed steels. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is desired. Typical applications include twist drills, end mills, form tools, reamers and milling cutters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-468. Producer or source: Tool steel mills. See also Alloy Digest TS-483, October 1987.

AISI TYPE M7

Alloy Digest ◽  
1987 ◽  
Vol 36 (10) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Significant Loss ◽  
Steel Mills ◽  
Aisi Type ◽  
End Mills ◽  
The Many ◽  
Twist Drills

Abstract AISI Type M7 is a molybdenum type of high-speed steel. It is somewhat similar to AISI Type M1 tool steel but with higher percentages of carbon and vanadium to provide an improvement over AISI Type M1 in cutting characteristics without a significant loss in toughness. It is suitable for a wide variety of cutting-tool applications where improved resistance to abrasion is required. The many uses of Type M7 include twist drills, end mills, shear blades, punches, milling cutters, lathe tools, taps and reamers. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-483. Producer or source: Tool steel mills. See also Alloy Digest TS-468, January 1987.

FAGERSTA M-7

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Cutting Efficiency ◽  
Aisi Type ◽  
Thread Rolling ◽  
End Mills ◽  
The Many ◽  
Twist Drills

Abstract FAGERSTA M-7 is a molybdenum-type high-speed steel similar to AISI Type M1, but with higher percentages of carbon and vanadium than M1. The higher levels of carbon and vanadium provide an improved cutting efficiency without significantly lowering toughness. The many applications of FAGERSTA M-7 include boring tools, end mills, lathe tools, twist drills, thread-rolling dies and wood-working tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-359. Producer or source: Fagersta Steels Inc..

GUTERL M-7

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Significant Loss ◽  
Aisi Type ◽  
End Mills ◽  
Twist Drills

Abstract GUTERL M-7 is a molybdenum type of high-speed steel. It is somewhat similar to AISI Type M1 tool steel but with higher percentages of carbon and vanadium to provide an improvement over M1 in cutting characteristics without a significant loss in toughness. It is used widely for cutting-tool applications that require improved resistance to abrasion. Its many uses include reamers, twist drills, taps, lathe tools, end mills and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-370. Producer or source: Guterl Special Steel Corporation.

TATMO V-N

Alloy Digest ◽  
1985 ◽  
Vol 34 (12) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Nitrogen Addition ◽  
Aisi Type ◽  
End Mills ◽  
Red Hardness ◽  
Edge Toughness

Abstract TATMO V-N is an AISI Type M7 high-speed steel modified by alloy balancing and a nitrogen addition to develop superior hardness response in heat treatment. It is an excellent grade for many cutting-tool applications requiring an optimum balance of red hardness, edge toughness and wear resistance, such as drills, taps, end mills, reamers and milling cutters. Its combination of outstanding properties and high hardness makes Tatmo V-N a logical alternate for cobalt high-speed steels in many cutting-tool applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-452. Producer or source: Latrobe Steel Company.

AISI TYPE M33

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Mills ◽  
Aisi Type ◽  
Heat Treated ◽  
Aircraft Alloys ◽  
Red Hardness

Abstract AISI Type M33 is a heavy-duty high-speed steel; it contains 8.00% cobalt to improved red hardness. It is recommended for cutting-tool applications in which wear resistance and high temperature hardness are important characteristics. It should not be used where excessive shock and/or chatter are encountered. AISI Type M33 is well suited to uses such as machining hard and heat-treated materials and machining both ferrous and nonferrous aircraft alloys. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-402. Producer or source: Tool steel mills.

VASCO M-7

Alloy Digest ◽  
1981 ◽  
Vol 30 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Cutting Efficiency ◽  
Aisi Type ◽  
End Mills

Abstract VASCO M-7 is a molybdenum type of high-speed steel having tungsten, chromium and molybdenum contents similar to AISI Type MI high-speed steel, but with higher carbon and vanadium. The increased percentages of carbon and vanadium add to the cutting efficiency of the steel without materially lessening the toughness. This steel has met with considerable favor among high-speed steel users who are seeking improved cutting properties for specific applications. Its many applications include drills, end mills, milling cutters, punches and shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-379. Producer or source: Teledyne Vasco.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

CPM REX 25

Alloy Digest ◽  
1980 ◽  
Vol 29 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Hardness ◽  
Heat Treating ◽  
High Speeds ◽  
Aisi Type ◽  
Tool Performance ◽  
End Mills ◽  
Machining Operations

Abstract CPM REX 25 is a super high-speed steel made without cobalt. It is comparable to AISI Type T15 cobalt-containing high-speed steel in response to heat treatment, properties, and tool performance. CPM REX 25 is recommended for machining operations requiring heavy cuts, high speeds and feeds, and difficult-to-machine materials of high hardness and abrasion resistance. Typical applications are boring tools, drills, gear cutters, punches, form tools, end mills and broaches. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-365. Producer or source: Crucible Materials Corporation.

AISI TYPE T1

Alloy Digest ◽  
1980 ◽  
Vol 29 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type T1 is a general-purpose, tungsten, high-speed steel containing nominally 18% tungsten, 4% chromium and 1% vanadium. It is suitable for practically all high-speed applications. This steel has been the standard of the industry for many years because of its cutting ability, ease of heat treatment and minimum tendency to decarburize. Its many applications include drills, taps, lathe and planer tools, broaches and hobs. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-373. Producer or source: Tool steel mills.

TNW

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Vanadium Content ◽  
Cold Forming ◽  
Molybdenum Steel ◽  
End Mills ◽  
Forming Tools ◽  
Twist Drills

Abstract TNW is a high-speed steel. It has an optimum alloy composition that combines the good toughness characteristics of a high-molybdenum steel and the excellent abrasion resistance provided by a 2% vanadium content. TNW is a popular choice for twist drills, taps, reamers, router bits, end mills and other similar cutting tools. Also its good toughness makes it well suited to punches and other difficult cold-forming tools requiring the properties of a high-speed steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-433. Producer or source: Latrobe Steel Company.

Sign in / Sign up

Export Citation Format

Share Document