Phase Capacity Characteristics for Signalized Interchange and Intersection Approaches

1998 ◽  
Vol 1646 (1) ◽  
pp. 96-105 ◽  
Author(s):  
James A. Bonneson ◽  
Carroll J. Messer
Keyword(s):  
Flow Rate ◽  
Urban Areas ◽  
High Volume ◽  
Traffic Volume ◽  
Passenger Car ◽  
Start Up ◽  
Lost Time ◽  
Saturation Flow Rate ◽  
Saturation Flow

Described in this paper are the development, calibration, and application of models that collectively can be used to predict the saturation flow rate and start-up lost time of through movements at signalized interchange ramp terminals and other closely spaced intersections. These models were calibrated with data collected at 12 interchanges. It is concluded that saturation flow rate decreases as the distance to the downstream queue decreases. This queue is formed by the signal at a downstream intersection. Saturation flow rate increases with traffic pressure, as quantified by traffic volume per cycle per lane. It is recommended that an ideal saturation flow rate of 2,000 passenger-car units per hour of green per lane be used for signalized ramp terminals and other high-volume intersections in urban areas. The data collected for this research indicate that start-up lost time increases with saturation flow rate.

scholarly journals Traffic Characteristics of Protected/Permitted Left-Turn Signal Displays

2000 ◽  
Vol 1708 (1) ◽  
pp. 28-39 ◽  
Author(s):  
David A. Noyce ◽  
Daniel B. Fambro ◽  
Kent C. Kacir
Keyword(s):  
Response Time ◽  
Flow Rate ◽  
Left Turn ◽  
Start Up ◽  
Green Ball ◽  
Lost Time ◽  
Saturation Flow Rate ◽  
Driver Understanding ◽  
Saturation Flow

At least four variations of the permitted indication in protected/permitted left-turn (PPLT) control have been developed in an attempt to improve the level of driver understanding and safety. These variations replace the green ball permitted indication with a flashing red ball, a flashing yellow ball, a flashing red arrow, or a flashing yellow arrow indication. In addition, the Manual on Uniform Traffic Control Devices allows several PPLT signal display arrangements. The variability in indication and arrangement has led to a myriad of PPLT displays throughout the United States. The level of driver understanding related to each PPLT display type, and the associated impact on traffic operations and safety, has not been quantified. A study was conducted to evaluate the operational characteristics associated with different PPLT signal displays. Specifically, the study quantified saturation flow rate, start-up lost time, response time, and follow-up headway associated with selected PPLT displays. No differences in saturation flow rate and start-up lost time were found due to the type of PPLT signal display. Saturation flow rates ranged from 1,770 to 2,400 vehicles per hour of green per lane and were related to differences in driver behavior between geographic locations. The variation in start-up lost time and response time between locations was primarily related to differences in phase sequence. The flashing red permitted indications were associated with the longest follow-up headway times, since drivers are required to stop before turning left with a flashing red permitted indication. The shortest follow-up headway was associated with the five-section cluster display using a green ball indication.

Saturation Flow Rate, Start-Up Lost Time, and Capacity for Bicycles at Signalized Intersections

2003 ◽  
Vol 1852 (1) ◽  
pp. 105-113 ◽  
Author(s):  
Winai Raksuntorn ◽  
Sarosh I. Khan
Keyword(s):  
Flow Rate ◽  
Field Studies ◽  
Signalized Intersections ◽  
Highway Capacity Manual ◽  
Start Up ◽  
Lost Time ◽  
Saturation Flow Rate ◽  
Saturation Flow ◽  
Bicycle Lane ◽  
Stop Line

A review of the literature shows that capacity and saturation flow rate for on-street bicycle lanes at intersections have not been measured on the basis of bicycle discharge at intersections at the start of the green phase. The Highway Capacity Manual 2000 recommends a saturation flow rate of 2,000 bicycles per hour for a bicycle lane at a signalized intersection. However, this recommendation is not based on field studies at the intersection and is not a function of the width of the bicycle lane. A revised estimate is provided of saturation flow rate, and an estimate is provided of start-up lost time for bicycles based on data collected at the stop line of signalized intersections. In addition, the lateral stopped distance of automobiles from bicycle lanes, the lateral stopped distance of bicycles from adjacent lanes, and the lateral and longitudinal stopped distance between pairs of bicycles at a signalized intersections are presented. Bicycles may form more than one queue within a bicycle lane at the stop line. Since bicycles maintain a certain distance from the adjacent lane and the curb, the number of queues formed varies based on the width of the bicycle lane. Therefore, the saturation flow rate for a bicycle lane depends on the number of queues or the width of the bicycle lane. The saturation flow rates for bicycle lanes of varying widths are proposed on the basis of the lateral stopped distance of bicycles. Empirical evidence from intersections in Colorado and California is used to propose a new method to estimate the capacity for a bicycle lane.

scholarly journals Estimation of Saturation Flow Rate and Start-Up Lost Time for Signal Timing Based on Headway Distribution

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yi Zhao ◽  
Wenbo Zhang ◽  
Jian Lu ◽  
Wenjun Zhang ◽  
Yongfeng Ma
Keyword(s):  
Flow Rate ◽  
Queue Length ◽  
Signal Timing ◽  
Start Up ◽  
Adjustment Factors ◽  
Headway Distribution ◽  
Lost Time ◽  
Saturation Flow Rate ◽  
New Perspective ◽  
Saturation Flow

This study aimed to calibrate saturation flow rate (SFR) and start-up lost time (SLT) when developing signal timing. In current commonly used methods, SFR for one given lane is usually calibrated from many subjective adjustment factors and a fixed result. SLT is calculated based on the fixed SFR, which prevents local applications in China. Considering the importance of traffic behavior (headway) in determining SFR and SLT, this study started from headway distribution and attempted to specify the relationships between headway and vehicle position directly. A common intersection in Nanjing, China, was selected to implement field study and data from 920 queues was collected. Headway distribution was explored and the 78th percentile of headway at each position was selected to build model. Based on the developed relationships, SFR and SLT were calibrated. The results showed that SFR and SLT were correlated with queue length. Moreover, the results showed that it was difficult to reach saturated state even with a long queue length. This paper provides a new perspective on calibrating important parameters in signal timing, which will be useful for traffic agencies to complete signal timing by making the process simpler.

Investigation of saturation flow rate using video camera at signalized intersections in Jordan

2020 ◽  
Vol 11 (1) ◽  
pp. 216-226
Author(s):  
Bara’ W. Al-Mistarehi ◽  
Ahmad H. Alomari ◽  
Mohamad S. Al Zoubi
Keyword(s):  
Flow Rate ◽  
Standard Procedure ◽  
Video Camera ◽  
Signalized Intersections ◽  
Speed Limit ◽  
Local Conditions ◽  
Highway Capacity Manual ◽  
Saturation Flow Rate ◽  
Turning Radius ◽  
Saturation Flow

AbstractThis study aimed to investigate a potential list of variables that may have an impact on the saturation flow rate (SFR) associated with different turning movements at signalized intersections in Jordan. Direct visits to locations were conducted, and a video camera was used. Highway capacity manual standard procedure was followed to collect the necessary traffic data. Multiple linear regression was performed to classify the factors that impact the SFR and to find the optimal model to foretell the SFR. Results showed that turning radius, presence of camera enforcement, and the speed limit are the significant factors that influence SFR for shared left- and U-turning movements (LUTM) with R2 = 76.9%. Furthermore, the presence of camera enforcement, number of lanes, speed limit, city, traffic volume, and area type are the factors that impact SFR for through movements only (THMO) with R2 = 69.6%. Also, it was found that the SFR for LUTM is 1611 vehicles per hour per lane (VPHPL),which is less than the SFR for THMO that equals to 1840 VPHPL. Calibration and validation of SFR based on local conditions can improve the efficiency of infrastructure operation and planning activities because vehicles’ characteristics and drivers’ behavior change over time.

Impact of Turning Lane Storage Length and Turning Proportions on Throughput at Oversaturated Signalized Intersections

2021 ◽  
pp. 036119812110171
Author(s):  
A. M. Tahsin Emtenan ◽  
Christopher M. Day
Keyword(s):  
Flow Rate ◽  
Cycle Length ◽  
Signal Timing ◽  
Real World Data ◽  
Left Turn ◽  
Common Response ◽  
Cycle Lengths ◽  
Saturation Flow Rate ◽  
Saturation Flow ◽  
Timing Strategies

During oversaturated conditions, common objectives of signal timing are to maximize vehicle throughput and manage queues. A common response to increases in vehicle volumes is to increase the cycle length. Because the clearance intervals are displayed less frequently with longer cycle lengths and fewer cycles, more of the total time is used for green indications, which implies that the signal timing is more efficient. However, previous studies have shown that throughput reaches a peak at a moderate cycle length and extending the cycle length beyond this actually decreases the total throughput. Part of the reason for this is that spillback caused by the turning traffic may cause starvation of the through lanes resulting in a reduction of the saturation flow rate within each lane. Gaps created by the turning traffic after a lane change may also reduce the saturation flow rate. There is a relationship between the proportions of turning traffic, the storage length of turning lanes, and the total throughput that can be achieved on an approach for a given cycle length and green time. This study seeks to explore this relationship to yield better signal timing strategies for oversaturated operations. A microsimulation model of an oversaturated left-turn movement with varying storage lengths and turning proportions is used to determine these relationships and establish a mathematical model of throughput as a function of the duration of green, storage length, and turning proportion. The model outcomes are compared against real-world data.

Distribution models for start-up lost time and effective departure flow rate

2013 ◽  
Vol 51 ◽  
pp. 1-11 ◽  
Author(s):  
Jiyuan Tan ◽  
Li Li ◽  
Zhiheng Li ◽  
Yi Zhang
Keyword(s):  
Flow Rate ◽  
Distribution Models ◽  
Start Up ◽  
Lost Time
Sign in / Sign up

Export Citation Format

Share Document