scholarly journals SPECIFICS OF VISCOUS OIL PRODUCTION USING A DRAIN-HOLE WELL

2016 ◽  
pp. 114-119
Author(s):  
I. V. Chizhov
Keyword(s):  
Oil Recovery ◽  
Oil Production ◽  
High Viscosity ◽  
Viscous Oil ◽  
Drain Hole ◽  
High Viscosity Oil

The article is devoted to the problem of increasing the efficiency of high viscosity oil recovery from low permeable beds.

scholarly journals Application of an Oil-Displacing Composition for Increasing Flow Rate of Low Producing High-Viscosity Oil Wells of the Usinskoye Oil Field

2016 ◽  
Vol 18 (2) ◽  
pp. 133
Author(s):  
L.K. Altunina ◽  
I.V. Kuvshinov ◽  
V.A. Kuvshinov ◽  
V.S. Ovsyannikova ◽  
D.I. Chuykina ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Oil Production ◽  
High Viscosity ◽  
Oil Field ◽  
Thermal Methods ◽  
Cold Stimulation ◽  
Well Production ◽  
Well Stimulation ◽  
High Viscosity Oil ◽  
Stimulation Of

The results of a pilot application of a chemical composition for enhanced oil recovery developed at the IPC SB RAS are presented. The EOR-composition was tested in 2014 at the Permian-Carboniferous heavy oil deposit at the Usinskoye oil field. It is very effective for an increase in oil production rate and decrease in water cuttings of well production. In terms of the additionally produced oil, the resulting effect is up to 800 tons per well and its duration is up to 6 months. The application of technologies of low-productivity-well stimulation using the oil-displacing IKhNPRO system with controlled viscosity and alkalinity is thought to be promising. This composition is proposed for the cold’ stimulation of high-viscosity oil production as an alternative to thermal methods.

scholarly journals Efficiency of horizontal wells in fields with highly viscous oil on the example of Tengri field

2021 ◽  
Vol 3 (2) ◽  
pp. 111-123
Author(s):  
A. S. Mardanov ◽  
R. A. Yussubaliev ◽  
A. A. Yergaliyev ◽  
A. M. Rakhmetullin
Keyword(s):  
Oil Recovery ◽  
High Efficiency ◽  
Complex Structure ◽  
Horizontal Wells ◽  
High Viscosity ◽  
Vertical Wells ◽  
Viscous Oil ◽  
Effective Development ◽  
High Viscosity Oil ◽  
Highly Viscous Oil

Due to the growing share of high-viscosity oils in Kazakhstan, task of their effective development is becoming more complicated. Development of terrigenous reservoirs that have a complex structure and contain high-viscosity oil lead to low rates of sampling and low values of oil recovery factor. Currently, technologies that ensure high efficiency in development of such deposits are very expensive. The paper considers a pilot section of the development horizon of cretaceous system of the Tengri field, drilled with vertical wells in accordance with current project document. Further the average characteristics of the parameters of horizontal wells are compared and measures are proposed to improve the efficiency of further operation of these wells.

Designing the Thermal Enhanced Oil Recovery as a Key Technology of High Viscosity Oil Production

2021 ◽  
Author(s):  
Mukhtar Shakenuly Shaken ◽  
Baurzhan Yerikovich Zhiyengaliyev ◽  
Altynbek Suleymenuly Mardanov ◽  
Adil Sultangaliyevich Dauletov
Keyword(s):  
Oil Recovery ◽  
Hydrodynamic Model ◽  
Oil Production ◽  
Horizontal Wells ◽  
High Viscosity ◽  
Oil Reservoirs ◽  
Production Rates ◽  
Cyclic Steam Stimulation ◽  
High Viscosity Oil ◽  
Steam Stimulation

Abstract Due to the decrease in "easy" oil reserves, oil companies are focusing on "hard-to-recover" reserves, in particular, high-viscosity oil reservoirs. Shallow oil reservoirs are mainly concentrated in the Cretaceous horizons, in the western region of the country, along the Caspian coast. One of them is a high-viscosity oil reservoir, consisting of three Cretaceous horizons. The average viscosity of oil in reservoir conditions is around 746.7 cP. The current achieved oil production is only 5% of the initial recoverable reserves, and designed oil recovery factor is 38% and implies the full-scale application of thermal methods of EOR. The objective of this work was to choose the most suitable thermal method of EOR and to assess the prospects of applicability with the calculation of economic feasibility. Considering the geological features of the reservoir, the cyclic steam stimulation was chosen as the optimal method to increase oil recovery. In order to assess the expediency of this technology, was initiated project on thermal modeling the technology based on the current geological and hydrodynamic model of the field, using the results of laboratory studies, calculations were performed on imagined horizontal wells, and carried out the analysis of technical and economic efficiency. According to the results of calculations on the hydrodynamic model, the production rates using the technology of cyclic steam stimulation in horizontal wells are 30% higher than the production rates of "cold production", and the difference in accumulated oil production over 5 years will be 20–30%.

scholarly journals Laboratory Studies of Carboniferous Reservoirs of High-Viscosity Oil Fields Using Carbondioxide

2020 ◽  
Vol 20 (4) ◽  
pp. 369-385
Author(s):  
Stanislav A. Kalinin ◽  
◽  
Oleg A. Morozyuk ◽  
Keyword(s):  
Carbon Dioxide ◽  
Heat Carrier ◽  
Oil Recovery ◽  
High Mobility ◽  
High Viscosity ◽  
Laboratory Studies ◽  
Carbon Dioxide Injection ◽  
Recovery Method ◽  
Matrix Blocks ◽  
High Viscosity Oil

It is of current concern for the Permian-Carboniferous reservior of the Usinskoye field to develop low-permeable matrix blocks of carboniferous reservoirs, which contain major reserves of high-viscosity oil. To increase effectiveness of the currently used thermal oil recovery methods, the authors suggest using carbon dioxide as a reservoir stimulation agent. Due to a high mobility in its supercritical condition, СО2 is, theoretically, able to penetrate matrix blocks, dissolve in oil and, additionally, decrease its viscosity. Thus, СО2 applications together with a heat carrier could increase effectiveness of the high-viscosity oil recoveries and improve production parameters of the Permian-Carboniferous reservior of the Usinskoye field. During carbon dioxide injections, including combinations with various agents, some additional oil production is possible due to certain factors. Determination of the influencing factors and detection of the most critical ones is possible in laboratory tests. So, laboratory studies entail the key stage in justification of the technology effectiveness. The paper deals with describing the laboratory facilities and methodologies based on reviews of the best world practice and previous laboratory researches. These aim at evaluating effectiveness of thermal, gas and combined oil recovery enhancement methods. In particular, the authors explore experimental facilities and propose methodology to perform integrated researches of the combined heat carrier and carbon dioxide injection technology to justify the effective super-viscous oil recovery method.

Cyclical Gel-Polymer Flooding Technology is an Effective Method of Enhanced Oil Recovery in High-Viscosity Oil Fields

2020 ◽  
Author(s):  
Svetlana Yur’evna Lobanova ◽  
Berdibek Ulanovich Yelubaev ◽  
Nikolay Evgen’evich Talamanov ◽  
Zhijian Sun ◽  
Chunxi Wang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Viscosity ◽  
Polymer Flooding ◽  
Oil Fields ◽  
High Viscosity Oil

scholarly journals Experience in the Application of Technologies for Intensifying the Production of High-Viscosity Oil in Fields of Perm Region

2020 ◽  
Vol 131 (6) ◽  
pp. 28-33
Author(s):  
R. A. Derendyaev ◽  
◽  
A. Yu. Slushkina ◽  
K. A. Derendyaev ◽  
◽  
...  
Keyword(s):  
Oil Production ◽  
High Viscosity ◽  
Analysis And Evaluation ◽  
High Viscosity Oil ◽  
Perm Region ◽  
Technical Measures

This paper presents an overview of technologies for intensifying oil production in the Perm Region fields with high-viscosity oil. The analysis and evaluation of the effectiveness of all geological and technical measures in a separate field. The result of the work is the justification for the application of the most rational measures for the development of deposits with high viscosity oil in the territory of the Perm Territory, followed by the formation of geological and physical criteria for the application of technologies for fields with high viscosity oil.

scholarly journals Laboratory Results of the Influence of Carbon Dioxide on the Development of the Permo-Carboniferous Reservoir of the Usinskoe Deposit

2021 ◽  
Vol 21 (1) ◽  
pp. 28-35
Author(s):  
Stanislav A. Stanislav A. ◽  
◽  
Oleg A. Morozyuk ◽  
Konstantin S. Kosterin ◽  
Semyon P. Podoinitsyn ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Oil Recovery ◽  
Co2 Concentration ◽  
High Viscosity ◽  
Co2 Injection ◽  
Oil Displacement ◽  
Displacement Mode ◽  
Use Of Technology ◽  
Reservoir Conditions ◽  
High Viscosity Oil

As an option for enhancing oil recovery of a high-viscosity Permo-Carboniferous reservoir associated with the Usinskoye field, the use of technology based on technogenic carbon dioxide as an injection agent is considered. In the world practice, several fields are known as close in their parameters to the parameters of the Permo-Carboniferous reservoir, and in which CO2 injection was accepted as successful. Based on this, CO2 injection can potentially be applicable in the conditions of a Permo-Carboniferous reservoir. At present, as a result of the various development technologies implementation, reservoir zones are distinguished, characterized by different thermobaric properties. Depending on reservoir conditions, when displacing oil with gases, various modes of oil displacement can be realized. This article describes the results of studies carried out to study the effect of the concentration of carbon dioxide on the properties of high-viscosity oil in the Permo-Carboniferous Reservoir of the Usinskoye field, as well as the results of filtration experiments on slim models performed to assess the oil displacement regime under various temperature and pressure conditions of the Permo-Carboniferous Reservoir. The study of the influence of CO2 concentration on oil properties was carried out using the standard PVT research technique. The displacement mode was assessed using the slim-tube technique. Based on the performed experiments, it was established that an increase in the concentration of CO2 in high-viscosity oil led to a noticeable change in its properties; for the conditions of a Permo-Carboniferous Reservoir, the most probable mode of oil displacement by carbon dioxide was established. Difficulties associated with the preparation of the CO2-heavy oil system were described separately. Based on a literature review, it was shown that the rate of mixing of oil with carbon dioxide depended on certain conditions.

scholarly journals Hydrodynamic modeling of field development using enhanced oil recovery methods

2021 ◽  
Vol 317 (2) ◽  
pp. 14-22
Author(s):  
G.Zh. Moldabayeva ◽  
◽  
A.Kh. Agzamov ◽  
R.T. Suleimenova ◽  
D.K. Elefteriadi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Seismic Data ◽  
Water Injection ◽  
Steam Injection ◽  
High Viscosity ◽  
Oil Fields ◽  
Borehole Data ◽  
Field Development ◽  
High Viscosity Oil ◽  
Cyclic Injection

This article discusses a digital geological model, the transfer of borehole data to the geological grid, and the modeling of the technology of alternating steam and water injection. Alternating injection involves the cyclic injection of steam and water into an injection well in high-viscosity oil fields. The essence of this technology is that during the steam injection for 2-4 months, the formation warms up, leading to a decrease in viscosity and an increase in oil mobility. Then comes the period of water injection, during which the production of already warmed oil continues and the formation pressure is maintained. For digital geological modeling, the following data were collected, processed and prepared: a list of wells that open the object of modeling, coordinates of wellheads, well altitudinal data, inclinometry of well trajectories, GМS data on wells, analysis of wells drilled with core sampling, and digitized seismic data (structural surfaces on the roof of stratigraphic horizons, parameter maps, contact surfaces, faults, structural maps on the roof of target horizons with faults, isochron maps, velocity maps).

scholarly journals Enhanced oil recovery from high-viscosity oil deposits by acid systems based on surfactants, coordining solvents and complex compounds

Georesursy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 103-113 ◽  
Author(s):  
Lyubov K. Altunina ◽  
Vladimir A. Kuvshinov ◽  
Lyubov A. Stasyeva ◽  
Ivan V. Kuvshinov
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Viscosity ◽  
Complex Compounds ◽  
Natural Mode ◽  
Inorganic Acid ◽  
Acid Oil ◽  
Oil Displacement ◽  
Oil Deposits ◽  
High Viscosity Oil

Physicochemical aspects of enhanced oil recovery (EOR) from heavy high-viscosity deposits, developed in natural mode and combined with thermal methods, using systems based on surface-active substances (surfactants), coordinating solvents and complex compounds are considered, which chemically evolve in situ to acquire colloidal-chemical properties that are optimal for oil displacement. Thermobaric reservoir conditions, interactions with reservoir rock and fluids are the factors causing the chemical evolution of the systems. To enhance oil recovery and intensify the development of high-viscosity deposits, acid oil-displacing systems of prolonged action based on surfactants, inorganic acid adduct and polyatomic alcohol have been created. As a result of experimental studies of acid-base equilibrium in the systems with donor-acceptor interactions – polybasic inorganic acid and polyol, the influence of electrolytes, non-electrolytes and surfactants, the optimal compositions of the systems were selected, as well as concentration ranges of the components in the acid systems. When the initially acid system interacts with the carbonate reservoir to release CO2, the oil viscosity decreases 1.2-2.7 times, the pH of the system rises and this system evolves chemically turning into an alkaline oil-displacing system. As a result it provides effective oil displacement and prolonged reservoir stimulation. The system is compatible with saline reservoir waters, has a low freezing point (minus 20 ÷ minus 60 oC), low interfacial tension at the oil boundary and is applicable in a wide temperature range, from 10 to 200 oC. In 2014-2018 field tests of EOR technologies were successfully carried out to intensify oil production in the test areas of the Permian-Carboniferous deposit of high-viscosity oil in the Usinsk oil field, developed in natural mode and combined with thermal-steam stimulation, using the acid oil-displacing system based on surfactants, coordinating solvents and complex compounds. The pilot tests proved high efficiency of EOR technologies, as far as the oil production rate significantly increased, water cut decreased to intensify the development. The EOR technologies are environmentally safe and technologically effective. Commercial use of the EOR is promising for high-viscosity oil deposits.

Sign in / Sign up

Export Citation Format

Share Document