scholarly journals Laboratory Studies of Carboniferous Reservoirs of High-Viscosity Oil Fields Using Carbondioxide

2020 ◽  
Vol 20 (4) ◽  
pp. 369-385
Author(s):  
Stanislav A. Kalinin ◽  
◽  
Oleg A. Morozyuk ◽  
Keyword(s):  
Carbon Dioxide ◽  
Heat Carrier ◽  
Oil Recovery ◽  
High Mobility ◽  
High Viscosity ◽  
Laboratory Studies ◽  
Carbon Dioxide Injection ◽  
Recovery Method ◽  
Matrix Blocks ◽  
High Viscosity Oil

It is of current concern for the Permian-Carboniferous reservior of the Usinskoye field to develop low-permeable matrix blocks of carboniferous reservoirs, which contain major reserves of high-viscosity oil. To increase effectiveness of the currently used thermal oil recovery methods, the authors suggest using carbon dioxide as a reservoir stimulation agent. Due to a high mobility in its supercritical condition, СО2 is, theoretically, able to penetrate matrix blocks, dissolve in oil and, additionally, decrease its viscosity. Thus, СО2 applications together with a heat carrier could increase effectiveness of the high-viscosity oil recoveries and improve production parameters of the Permian-Carboniferous reservior of the Usinskoye field. During carbon dioxide injections, including combinations with various agents, some additional oil production is possible due to certain factors. Determination of the influencing factors and detection of the most critical ones is possible in laboratory tests. So, laboratory studies entail the key stage in justification of the technology effectiveness. The paper deals with describing the laboratory facilities and methodologies based on reviews of the best world practice and previous laboratory researches. These aim at evaluating effectiveness of thermal, gas and combined oil recovery enhancement methods. In particular, the authors explore experimental facilities and propose methodology to perform integrated researches of the combined heat carrier and carbon dioxide injection technology to justify the effective super-viscous oil recovery method.

scholarly journals Laboratory Results of the Influence of Carbon Dioxide on the Development of the Permo-Carboniferous Reservoir of the Usinskoe Deposit

2021 ◽  
Vol 21 (1) ◽  
pp. 28-35
Author(s):  
Stanislav A. Stanislav A. ◽  
◽  
Oleg A. Morozyuk ◽  
Konstantin S. Kosterin ◽  
Semyon P. Podoinitsyn ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Oil Recovery ◽  
Co2 Concentration ◽  
High Viscosity ◽  
Co2 Injection ◽  
Oil Displacement ◽  
Displacement Mode ◽  
Use Of Technology ◽  
Reservoir Conditions ◽  
High Viscosity Oil

As an option for enhancing oil recovery of a high-viscosity Permo-Carboniferous reservoir associated with the Usinskoye field, the use of technology based on technogenic carbon dioxide as an injection agent is considered. In the world practice, several fields are known as close in their parameters to the parameters of the Permo-Carboniferous reservoir, and in which CO2 injection was accepted as successful. Based on this, CO2 injection can potentially be applicable in the conditions of a Permo-Carboniferous reservoir. At present, as a result of the various development technologies implementation, reservoir zones are distinguished, characterized by different thermobaric properties. Depending on reservoir conditions, when displacing oil with gases, various modes of oil displacement can be realized. This article describes the results of studies carried out to study the effect of the concentration of carbon dioxide on the properties of high-viscosity oil in the Permo-Carboniferous Reservoir of the Usinskoye field, as well as the results of filtration experiments on slim models performed to assess the oil displacement regime under various temperature and pressure conditions of the Permo-Carboniferous Reservoir. The study of the influence of CO2 concentration on oil properties was carried out using the standard PVT research technique. The displacement mode was assessed using the slim-tube technique. Based on the performed experiments, it was established that an increase in the concentration of CO2 in high-viscosity oil led to a noticeable change in its properties; for the conditions of a Permo-Carboniferous Reservoir, the most probable mode of oil displacement by carbon dioxide was established. Difficulties associated with the preparation of the CO2-heavy oil system were described separately. Based on a literature review, it was shown that the rate of mixing of oil with carbon dioxide depended on certain conditions.

scholarly journals Assessment of CO2 flooding as enhanced oil recovery

2021 ◽  
Vol 340 ◽  
pp. 01021
Author(s):  
Akhat Makhambetov ◽  
Nursultan Azilkhanov
Keyword(s):  
Carbon Dioxide ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Reservoir ◽  
Oil Fields ◽  
Co2 Flooding ◽  
Carbon Dioxide Injection ◽  
Recovery Method ◽  
Stage Of Development ◽  
Temperature And Pressure

This article discusses evaluating CO2 injection as an enhanced oil recovery method. Carbon dioxide injection is a secondary and tertiary enhanced oil recovery method and is used in the final stage of development. Carbon dioxide mixes well with oil and can dissolve heavy components. Also, CO2 maintains reservoir pressure, which prevents the flow rate from dropping. In order for carbon dioxide and oil to mix, it must be brought to a critical state by increasing the temperature and pressure. After reaching the required conditions, both substances are fully compatible. The result of this combination is a medium that can easily seep through a porous medium. In fact, gas injection would be appropriate to use in a carbonate reservoir, and in our country and all over the world there are many oil fields that are located in carbonate rock. This work is based on data on a field located in the Krasnoyarsk region, which is part of the Angara fold zones. The field itself is represented mainly by carbonate reservoirs. Also, application of this method for Kazakhstan oilfield will be considered, using an example Zhetybay oilfield.

scholarly journals Integrated physical enhanced recovery method for high-viscosity oil reservoirs

2021 ◽  
Vol 244 ◽  
pp. 09012
Author(s):  
Aziz Khudaiberdiev ◽  
Petr Kosianov
Keyword(s):  
Electromagnetic Fields ◽  
Electric Fields ◽  
Oil Recovery ◽  
Enhanced Recovery ◽  
High Viscosity ◽  
Steam Treatment ◽  
Recovery Method ◽  
Mobility Of Molecules ◽  
High Viscosity Oil ◽  
The Impact

The physical methods of enhanced oil recovery using electromagnetic fields are studied in this paper. Purpose of the work is to study the dependence of the main quantities that determine the volume of filtered oil, including the viscosity of oil, on the parameters (temperature, intensity and frequency) of thermal and electromagnetic fields, and optimize these parameters for maximum oil recovery factor using electric fields and steam treatment of the formation.It is proposed to combine the most effective and environmentally friendly methods to increase oil production. In the developed technique, methods of converting steam energy are used to create a torque of the drilling device with simultaneous steam treatment of the bottomhole zone of the reservoir. As well as the impact of an alternating electromagnetic field on the reservoir matrix and interstratal liquid fluids to create currents, increase the mobility of molecules of liquid fluids, and, as a consequence, increase the temperature and lower the viscosity of oil, which will increase oil recovery. As a result of numerous experimental experiments carried out using the original setup in the laboratory of the branch of the Tyumen Industrial University in Nizhnevartovsk, it was shown that a decrease in viscosity is observed only when exposed to simultaneous thermal and electromagnetic fields.

scholarly journals Disposal of flue gases in oil reservoirs with high-viscosity oil in order to increase oil recovery and improve the environmental situation

2019 ◽  
Vol 116 ◽  
pp. 00075
Author(s):  
Evgeniy Shchesnyak ◽  
Anatoliy Ryzhkov ◽  
Iosif Ledovich ◽  
Andrey Osipov ◽  
Artur Musin
Keyword(s):  
Carbon Dioxide ◽  
Oil Recovery ◽  
Carbon Dioxide Emissions ◽  
High Efficiency ◽  
High Viscosity ◽  
Flue Gases ◽  
Chemical Effect ◽  
Natural Bitumen ◽  
Water Steam ◽  
High Viscosity Oil

The reserves of highly viscous oils and natural bitumen are several times higher than the stocks of light oils. In the development of such oils by thermal methods, steam is produced, the development of which is accompanied by significant emissions into the atmosphere of flue gases, including carbon dioxide. According to estimates, the extraction of high-viscosity oils annually releases about 34.5 million tons of carbon dioxide into the atmosphere. However, carbon dioxide emissions from steam generation can be reduced to zero by injecting flue gases along with steam into the formation. In addition to environmental benefits, the technology of co-injection of water vapor and combustion gases (nitrogen and carbon dioxide) has a complex (thermal and physico-chemical) effect on the formation with a synergistic effect. The article is devoted to the analysis of the mechanisms affecting the increase in oil recovery during the co-injection of steam with flue gases, the description of equipment for the injection of flue gases into the reservoir, as well as the analysis of field experience in using this technology. The calculations for one of the fields of high-viscosity oil show the high efficiency of co-injection of water steam with flue gases.

A Laboratory Investigation of the Effect of Ethanol-Treated Carbon Dioxide Injection on Oil Recovery and Carbon Dioxide Storage

SPE Journal ◽  
2021 ◽  
pp. 1-17
Author(s):  
Saira ◽  
Emmanuel Ajoma ◽  
Furqan Le-Hussain
Keyword(s):  
Carbon Dioxide ◽  
Oil Recovery ◽  
Carbon Capture ◽  
Molar Fraction ◽  
Co2 Injection ◽  
Carbon Dioxide Injection ◽  
Treated Carbon ◽  
Carbon Dioxide Co2 ◽  
And Storage ◽  
Experimental Runs

Summary Carbon dioxide (CO2) enhanced oil recovery is the most economical technique for carbon capture, usage, and storage. In depleted reservoirs, full or near-miscibility of injected CO2 with oil is difficult to achieve, and immiscible CO2 injection leaves a large volume of oil behind and limits available pore volume (PV) for storing CO2. In this paper, we present an experimental study to delineate the effect of ethanol-treated CO2 injection on oil recovery, net CO2 stored, and amount of ethanol left in the reservoir. We inject CO2 and ethanol-treated CO2 into Bentheimer Sandstone cores representing reservoirs. The oil phase consists of a mixture of 0.65 hexane and 0.35 decane (C6-C10 mixture) by molar fraction in one set of experimental runs, and pure decane (C10) in the other set of experimental runs. All experimental runs are conducted at constant temperature 70°C and various pressures to exhibit immiscibility (9.0 MPa for the C6-C10 mixture and 9.6 MPa for pure C10) or near-miscibility (11.7 MPa for the C6-C10 mixture and 12.1 MPa for pure C10). Pressure differences across the core, oil recovery, and compositions and rates of the produced fluids are recorded during the experimental runs. Ultimate oil recovery under immiscibility is found to be 9 to 15% greater using ethanol-treated CO2 injection than that using pure CO2 injection. Net CO2 stored for pure C10 under immiscibility is found to be 0.134 PV greater during ethanol-treated CO2 injection than during pure CO2 injection. For the C6-C10 mixture under immiscibility, both ethanol-treated CO2 injection and CO2 injection yield the same net CO2 stored. However, for the C6-C10 mixture under near-miscibility,ethanol-treated CO2 injection is found to yield 0.161 PV less net CO2 stored than does pure CO2 injection. These results suggest potential improvement in oil recovery and net CO2 stored using ethanol-treated CO2 injection instead of pure CO2 injection. If economically viable, ethanol-treated CO2 injection could be used as a carbon capture, usage, and storage method in low-pressure reservoirs, for which pure CO2 injection would be infeasible.

Cyclical Gel-Polymer Flooding Technology is an Effective Method of Enhanced Oil Recovery in High-Viscosity Oil Fields

2020 ◽  
Author(s):  
Svetlana Yur’evna Lobanova ◽  
Berdibek Ulanovich Yelubaev ◽  
Nikolay Evgen’evich Talamanov ◽  
Zhijian Sun ◽  
Chunxi Wang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Viscosity ◽  
Polymer Flooding ◽  
Oil Fields ◽  
High Viscosity Oil

scholarly journals An experimental investigation of asphaltene stability in heavy crude oil during carbon dioxide injection

2019 ◽  
Vol 10 (3) ◽  
pp. 919-931 ◽  
Author(s):  
Sherif Fakher ◽  
Mohamed Ahdaya ◽  
Mukhtar Elturki ◽  
Abdulmohsin Imqam
Keyword(s):  
Carbon Dioxide ◽  
Crude Oil ◽  
Pore Size ◽  
Oil Recovery ◽  
Asphaltene Precipitation ◽  
Carbon Dioxide Injection ◽  
Oil Viscosity ◽  
Membrane Pore ◽  
Pore Sizes ◽  
Filter Membrane

Abstract Carbon dioxide (CO2) injection is one of the most applied enhanced oil recovery methods in the hydrocarbon industry, since it has the potential to increase oil recovery significantly and can help reduce greenhouse gases through carbon storage in hydrocarbon reservoirs. Carbon dioxide injection has a severe drawback, however, since it induces asphaltene precipitation by disrupting the asphaltene stability in crude oil that bears even the slightest asphaltene concentration. This can result in severe operational problems, such as reservoir pore plugging and wellbore plugging. This research investigates some of the main factors that impact asphaltene stability in crude oil during CO2 injection. Initially, asphaltene precipitation, flocculation, and deposition were tested using visual tests without CO2 in order to evaluate the effect of oil viscosity and temperature on asphaltene stability and content in the crude oil. The results obtained from the visualization experiments were correlated to the Yen–Mullins asphaltene model and were used to select the proper chemical to alter the oil’s viscosity without strongly affecting asphaltene stability. After performing the visual asphaltene tests, a specially designed filtration vessel was used to perform the oil filtration experiments using filter membranes with a micron and nanometer pore size. The effect of varying CO2 injection pressure, oil viscosity, filter membrane pore size, and filter membrane thickness on asphaltene stability in crude oil was investigated. The results were then correlated with the Yen–Mullins asphaltene model to characterize the asphaltene size within the oil as well. Results showed that as the oil viscosity increased, the asphaltene concentration in the oil also increased. Also, the asphaltene concentration and filter cake thickness increased with the decrease in filter membrane pore size, since the asphaltene particles either plugged up the smaller pores, or the asphaltene nanoaggregates were larger than the pore sizes, and thus the majority of them could not pass. This research studies asphaltene instability in crude oil during CO2 injection in different pore sizes, and correlates the results to the principle of the Yen–Mullins model for asphaltenes. The results from this research can help emphasize the factors that will impact asphaltene stability during CO2 injection in different pore sizes in order to help reduce asphaltene-related problems that arise during CO2 injection in hydrocarbon reservoirs.

The Effect of Phase Equilibria on the CO2 Displacement Mechanism

1979 ◽  
Vol 19 (04) ◽  
pp. 242-252 ◽  
Author(s):  
R.S. Metcalfe ◽  
Lyman Yarborough
Keyword(s):  
Carbon Dioxide ◽  
Phase Equilibria ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Miscible Displacement ◽  
Co2 Flooding ◽  
Recovery Method ◽  
Two Fluids ◽  
Reservoir Conditions

Abstract Carbon dioxide flooding under miscible conditions is being developed as a major process for enhanced oil recovery. This paper presents results of research studies to increase our understanding of the multiple-contact miscible displacement mechanism for CO2 flooding. Carbon dioxide displacements of three synthetic oils of increasing complexity (increasing number of hydrocarbon components) are described. The paper concentrates on results of laboratory flow studies, but uses results of phase-equilibria and numerical studies to support the conclusions.Results from studies with synthetic oils show that at least two multiple-contact miscible mechanisms, vaporization and condensation, can be identified and that the phase-equilibria data can be used as a basis for describing the mechanism. The phase-equilibria change with varying reservoir conditions, and the flow studies show that the miscible mechanism depends on the phase-equilibria behavior. Qualitative predictions with mathematical models support our conclusions.Phase-equilibria data with naturally occurring oils suggest the two mechanisms (vaporization and condensation) are relevant to CO2 displacements at reservoir conditions and are a basis for specifying the controlling mechanisms. Introduction Miscible-displacement processes, which rely on multiple contacts of injected gas and reservoir oil to develop an in-situ solvent, generally have been recognized by the petroleum industry as an important enhanced oil-recovery method. More recently, CO2 flooding has advanced to the position (in the U.S.) of being the most economically attractive of the multiple-contact miscibility (MCM) processes. Several projects have been or are currently being conducted either to study or use CO2 as an enhanced oil-recovery method. It has been demonstrated convincingly by Holm and others that CO2 can recover oil from laboratory systems and therefore from the swept zone of petroleum reservoirs using miscible displacement. However, several contradictions seem to exist in published results.. These authors attempt to establish the mechanism(s) through which CO2 and oil form a miscible solvent in situ. (The solvent thus produced is capable of performing as though the two fluids were miscible when performing as though the two fluids were miscible when injected.) In addition, little experimental work has been published to provide support for the mechanisms of multiple-contact miscibility, as originally discussed by Hutchinson and Braun.One can reasonably assume that the miscible CO2 process will be related directly to phase equilibria process will be related directly to phase equilibria because it involves intimate contact of gases and liquids. However, no data have been published to indicate that the mechanism for miscibility development may differ for varying phase-equilibria conditions.This paper presents the results of both flow and phase-equilibria studies performed to determine the phase-equilibria studies performed to determine the mechanism(s) of CO2 multiple-contact miscibility. These flow studies used CO2 to displace three multicomponent hydrocarbon mixtures under first-contact miscible, multiple-contact miscible, and immiscible conditions. Results are presented to support the vaporization mechanism as described by Hutchinson and Braun, and also to show that more than one mechanism is possible with CO2 displacements. The reason for the latter is found in the results of phase-equilibria studies. SPEJ P. 242

Sign in / Sign up

Export Citation Format

Share Document