scholarly journals Vibration Suppression GUI Tool based Input Shaping Control and Its Applications to Industrial Processes

2009 ◽  
Vol 42 (16) ◽  
pp. 233-238
Author(s):  
Kazuhiko Terashima ◽  
Minh Duc Duong ◽  
Youji Masui ◽  
Hirotoshi Kawamura ◽  
Toshio Kamigaki ◽  
...  
Keyword(s):  
Vibration Suppression ◽  
Industrial Processes ◽  
Input Shaping ◽  
Input Shaping Control

scholarly journals Quick Suppression of Vibration of Robot via Hybrid Input Shaping Control Strategy

2019 ◽  
Vol 37 (3) ◽  
pp. 636-642
Author(s):  
Yulan Wei ◽  
Bing Li ◽  
Qingzhu Zhang ◽  
Pengfei Ou
Keyword(s):  
Response Time ◽  
Control Strategy ◽  
Vibration Suppression ◽  
Response Speed ◽  
Parallel Robot ◽  
Input Shaping ◽  
Frequency Bandwidth ◽  
Residual Vibration ◽  
Response Curves ◽  
Input Shaping Control

When the vibration amplitude and resonant frequency bandwidth of each mode are different in the multiple-modal system, the response time of a system is increased but the residual vibration is effectively reduced by the positive impulses multiple-modal input shapers. However, a negative impulses hybrid multiple-modal input shaping method can solve those problems. The basic principle of this control strategy and a 3-DOF parallel robot were introduced. Six negative impulses hybrid input shapers to reduce vibration of the first two modes were constructed based on the robot. Using simulation methods, the response time and vibration suppression abilities of various negative impulses hybrid two-modal input shapers (NHTIS) were obtained by analyzing the vibration response curves of these input shapers, and comparing with positive and negative impulses two-modal input shapers, respectively. The results show that the NHTIS can improve the response speed of the system while significantly reducing the multiple-modal residual vibration.

Effect of Input Shaping on Response of Inertia Plants

2011 ◽  
Vol 121-126 ◽  
pp. 2676-2680
Author(s):  
Ming Xiao Dong ◽  
Rui Chuan Li ◽  
Qin Zu Xu
Keyword(s):  
Control System ◽  
Feedback Control ◽  
Control Systems ◽  
Setting Time ◽  
Input Shaping ◽  
Pd Controller ◽  
Residual Vibration ◽  
Simulation Results ◽  
Analytical Expressions ◽  
Input Shaping Control

A poorly designed control system can lead to excessive residual vibration and long setting time. This paper investigates the effect of input shaping on control efficiency. To perform this investigation, we design a PD controller combined with input shaping for an inertia plant. We then subject it to four standard types of inputs. The responses of the control systems are described by analytical expressions. The performances of PD control and PD combined with input-shaping control are thoroughly analyzed and compared. Simulation results show that PD feedback control enhanced with input shaping minimizes overshoot and setting time.

scholarly journals A Cable-Passive Damper System for Sway and Skew Motion Control of a Crane Spreader

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
La Duc Viet ◽  
Youngjin Park
Keyword(s):  
Motion Control ◽  
Input Shaping ◽  
Passive System ◽  
Time Integral ◽  
Passive Damper ◽  
Optimal Damping ◽  
Control Command ◽  
System Energy ◽  
Energy Dissipated ◽  
Input Shaping Control

While the crane control problem is often approached by applying a certain active control command to some parts of the crane, this paper proposes a cable-passive damper system to reduce the vibration of a four-cable suspended crane spreader. The residual sway and skew motions of a crane spreader always produce the angle deflections between the crane cables and the crane spreader. The idea in this paper is to convert those deflections into energy dissipated by the viscous dampers, which connect the cables and the spreader. The proposed damper system is effective in reducing spreader sway and skew motions. Moreover, the optimal damping coefficient can be found analytically by minimizing the time integral of system energy. The numerical simulations show that the proposed passive system can assist the input shaping control of the trolley motion in reducing both sway and skew responses.

scholarly journals INPUT SHAPING CONTROL TO REDUCE RESIDUAL VIBRATION OF A FLEXIBLE BEAM

2016 ◽  
Vol 32 (1) ◽  
pp. 75-90 ◽  
Author(s):  
Quoc Chi Nguyen ◽  
Ha Quang Thinh Ngo
Keyword(s):  
Control Algorithms ◽  
Input Shaping ◽  
Flexible Beam ◽  
Residual Vibration ◽  
Motion System ◽  
Damped System ◽  
Input Shaping Control

In this paper, three control algorithms based on input shaping method are developed to suppress the residual vibration of a flexible beam. The flexible beam is modeled as an under-damped system. Three input shapers, ZV, ZVD, and ZVDD, are used to control the flexible beam. The three control algorithms are implemented by using the Mechatrolink-III motion system. The experiments are performed to verify the effectiveness of the three control algorithms.

scholarly journals Combining Input Shaping and Adaptive Model-Following Control for Vibration Suppression

2021 ◽  
Vol 25 (1) ◽  
pp. 56-63
Author(s):  
Jinhua She ◽  
Lulu Wu ◽  
Zhen-Tao Liu ◽  
◽  
◽  
...  
Keyword(s):  
Vibration Suppression ◽  
Golden Section ◽  
Input Shaping ◽  
Adaptive Model ◽  
Servo Systems ◽  
Elastic Load ◽  
Model Following Control ◽  
Model Following ◽  
Input Shaper ◽  
Precision Motion

Vibration suppression in servo systems is significant in high-precision motion control. This paper describes a vibration-suppression method based on input shaping and adaptive model-following control. First, a zero vibration input shaper is used to suppress the vibration caused by an elastic load to obtain an ideal position output. Then, a configuration that combines input shaping with model-following control is developed to suppress the vibration caused by changes of system parameters. Finally, analyzing the percentage residual vibration reveals that it is effective to employ the sum of squared position error as a criterion. Additionally, a golden-section search is used to adjust the parameters of a compensator in an online fashion to adapt to the changes in the vibration frequency. A comparison with other input shaper methods shows the effectiveness and superiority of the developed method.

Sign in / Sign up

Export Citation Format

Share Document