scholarly journals Lysimeter tests for change in leachate quality from the modified removed soil: interaction between soil and polymer modification agent

2021 ◽  
Vol 9 (10) ◽  
pp. 461-466
Author(s):  
Jialin Mo ◽  
Kazuto Endo ◽  
Hiroyuki Arai ◽  
Takuya Miura ◽  
Kosuke Nakamura
Keyword(s):  
Polymer Modification ◽  
Leachate Quality

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

Environmental Effects of Dredging. Factors Affecting Leachate Quality.

1989 ◽  
Author(s):  
James M. Brannon ◽  
Judith C. Pennington ◽  
Tommy E. Myers ◽  
Cynthia B. Price
Keyword(s):  
Environmental Effects ◽  
Factors Affecting ◽  
Leachate Quality

scholarly journals Vertical Orientation of Liquid Crystal on 4-n-Alkyloxyphenoxymethyl-Substituted Polystyrene Containing Liquid Crystal Precursor

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 736
Author(s):  
Kyutae Seo ◽  
Hyo Kang
Keyword(s):  
Molecular Structure ◽  
Liquid Crystal ◽  
Surface Energy ◽  
Polymer Films ◽  
Ultraviolet Irradiation ◽  
Molar Fraction ◽  
Side Chain ◽  
Polymer Modification ◽  
Vertical Orientation ◽  
Surface Energies

We synthesized a series of polystyrene derivatives that were modified with precursors of liquid crystal (LC) molecules, such as 4-ethyloxyphenol (homopolymer PEOP and copolymer PEOP#; # = 20, 40, 60, and 80, where # indicates the molar fraction of 4-ethyloxyphenoxymethyl in the side chain), 4-n-butyloxyphenol (PBOP), 4-n-hexyloxyphenol (PHOP), and 4-n-octyloxyphenol (POOP), via polymer modification reaction to investigate the orientation of LC molecules on polymer films, exhibiting part of the LC molecular structure. LC molecules showed a stable and uniform vertical orientation in LC cells fabricated with polymers that have 4-ethyloxyphenoxymethyl in the range of 40–100 mol%. In addition, similar results were obtained in LC cells fabricated with homopolymers of PEOP, PBOP, PHOP, and POOP. The vertical orientation of LC molecules in LC cells fabricated with polymer films correlated to the surface energy of polymer films. For example, vertical LC orientation was observed when the total surface energies of the polymer films were lower than approximately 43.2 mJ/m2. Good alignment stabilities were observed at 150 °C and 20 J/cm2 of ultraviolet irradiation for LC cells fabricated with PEOP film.

scholarly journals Alignment Layer of Liquid Crystal Using Plant-Based Isoeugenol-Substituted Polystyrene

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 547
Author(s):  
DaEun Yang ◽  
Kyutae Seo ◽  
Hyo Kang
Keyword(s):  
Liquid Crystal ◽  
Surface Energy ◽  
Polymer Film ◽  
Uv Irradiation ◽  
Molar Content ◽  
Polymer Modification ◽  
Alignment Layer ◽  
Energy Value ◽  
Alignment System ◽  
Molar Percent

We synthesized a series of renewable and plant-based isoeugenol-substituted polystyrenes (PIEU#, # = 100, 80, 60, 40, and 20, where # is the molar percent content of isoeugenol moiety), using polymer modification reactions to study their liquid crystal (LC) alignment behavior. In general, the LC cells fabricated using polymer film with a higher molar content of isoeugenol side groups showed vertical LC alignment behavior. This alignment behavior was well related to the surface energy value of the polymer layer. For example, vertical alignments were observed when the polar surface energy value of the polymer was smaller than approximately 3.59 mJ/m2, generated by the nonpolar isoeugenol moiety with long and bulky carbon groups. Good alignment stability at 100 °C and under ultraviolet (UV) irradiation of 15 J/cm2 was observed for the LC cells fabricated using PIEU100 as a LC alignment layer. Therefore, renewable isoeugenol-based materials can be used to produce an eco-friendly vertical LC alignment system.

scholarly journals Chemical modification of the polymer of intrinsic microporosity PIM-1 for enhanced hydrogen storage

Adsorption ◽  
2020 ◽  
Vol 26 (7) ◽  
pp. 1083-1091
Author(s):  
Mi Tian ◽  
Sébastien Rochat ◽  
Hamish Fawcett ◽  
Andrew D. Burrows ◽  
Christopher R. Bowen ◽  
...  
Keyword(s):  
Hydrogen Storage ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Sorption Properties ◽  
Bet Surface Area ◽  
Polymer Modification ◽  
Gas Sorption ◽  
Chemically Modified ◽  
Polymer Of Intrinsic Microporosity ◽  
Intrinsic Microporosity

Abstract A detailed investigation has been carried out of the pre-polymerisation modification of the polymer of intrinsic microporosity PIM-1 by the addition of two methyl (Me) groups to its spirobisindane unit to create a new chemically modified PIM-1 analogue, termed MePIM. Our work explores the effects of this modification on the porosity of PIM-1 and hence on its gas sorption properties. MePIM was successfully synthesised using either low (338 K) or high (423 K) temperature syntheses. It was observed that introduction of methyl groups to the spirobisindane part of PIM-1 generates additional microporous spaces, which significantly increases both surface area and hydrogen storage capacity. The BET surface area (N2 at 77 K) was increased by ~ 12.5%, resulting in a ~ 25% increase of hydrogen adsorption after modification. MePIM also maintains the advantages of good processability and thermal stability. This work provides new insights on a facile polymer modification that enables enhanced gas sorption properties.

scholarly journals Vertical Orientation of Liquid Crystal on Polystyrene Substituted with n-Alkylbenzoate-p-oxymethyl Pendant Group as a Liquid Crystal Precursor

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2058
Author(s):  
Kyutae Seo ◽  
Hyo Kang
Keyword(s):  
Contact Angle ◽  
Liquid Crystal ◽  
Water Contact Angle ◽  
Polymer Films ◽  
Molar Fraction ◽  
Side Chain ◽  
Pendant Group ◽  
Polymer Modification ◽  
Vertical Orientation ◽  
Water Contact

We synthesized a series of polystyrene derivatives modified with precursors of liquid crystal (LC) molecules via polymer modification reactions. Thereafter, the orientation of the LC molecules on the polymer films, which possess part of the corresponding LC molecular structure, was investigated systematically. The precursors and the corresponding derivatives used in this study include ethyl-p-hydroxybenzoate (homopolymer P2BO and copolymer P2BO#, where # indicates the molar fraction of ethylbenzoate-p-oxymethyl in the side chain (# = 20, 40, 60, and 80)), n-butyl-p-hydroxybenzoate (P4BO), n-hexyl-p-hydroxybenzoate (P6BO), and n-octyl-p-hydroxybenzoate (P8BO). A stable and uniform vertical orientation of LC molecules was observed in LC cells fabricated with P2BO#, with 40 mol% or more ethylbenzoate-p-oxymethyl side groups. In addition, the LC molecules were oriented vertically in LC cells fabricated with homopolymers of P2BO, P4BO, P6BO, and P8BO. The water contact angle on the polymer films can be associated with the vertical orientation of the LC molecules in the LC cells fabricated with the polymer films. For example, vertical LC orientation was observed when the water contact angle of the polymer films was greater than ~86°. Good orientation stability was observed at 150 °C and with 20 J/cm2 of UV irradiation for LC cells fabricated with the P2BO film.

Sign in / Sign up

Export Citation Format

Share Document