crosslinking process
Recently Published Documents


TOTAL DOCUMENTS

169
(FIVE YEARS 67)

H-INDEX

17
(FIVE YEARS 4)

Designs ◽  
2022 ◽  
Vol 6 (1) ◽  
pp. 5
Author(s):  
Traian V. Chirila ◽  
Shuko Suzuki

This study was aimed at generating data for designing a potential method to prevent the rupture of the abdominal aortic aneurysm (AAA). We found that the mechanical strength and stiffness of blood vessel walls was enhanced by the crosslinking of adventitial collagen through a photochemical process promoted by ultraviolet-A (UV-A) radiation. The experiments were carried out on samples isolated from 25 normal porcine aortas. The adventitial layer was separated from the other layers and exposed to UV radiation of 365-nm wavelength, in the presence of a riboflavin compound as the photosensitizer. Mechanical testing of 30 specimens, prior to and after exposure, indicated an increase in both strength (ultimate stress) and stiffness (Young’s modulus) of the adventitial specimens following irradiation. The crosslinking process also led to an enhanced resistance to experimental collagenolysis, as determined on six specimens. At this phase of conceptual design, we suggest that by applying this method to an aneurysmal dilated wall region, the stabilization of tunica adventitia may delay or prevent the rupture of the aneurysm and, with further investigation and refinement, can become a therapeutic strategy for arresting the progression of AAA.


2022 ◽  
Vol 23 (1) ◽  
pp. 539
Author(s):  
Beatrice Piola ◽  
Maurizio Sabbatini ◽  
Sarah Gino ◽  
Marco Invernizzi ◽  
Filippo Renò

In recent years, bioprinting has attracted much attention as a potential tool for generating complex 3D biological constructs capable of mimicking the native tissue microenvironment and promoting physiologically relevant cell–cell and cell–matrix interactions. The aim of the present study was to develop a crosslinked 3D printable hydrogel based on biocompatible natural polymers, gelatin and xanthan gum at different percentages to be used both as a scaffold for cell growth and as a wound dressing. The CellInk Inkredible 3D printer was used for the 3D printing of hydrogels, and a glutaraldehyde solution was tested for the crosslinking process. We were able to obtain two kinds of printable hydrogels with different porosity, swelling and degradation time. Subsequently, the printed hydrogels were characterized from the point of view of biocompatibility. Our results showed that gelatin/xanthan-gum bioprinted hydrogels were biocompatible materials, as they allowed both human keratinocyte and fibroblast in vitro growth for 14 days. These two bioprintable hydrogels could be also used as a helpful dressing material.


Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 6
Author(s):  
Mingchao Sun ◽  
Shaojuan Chen ◽  
Peixue Ling ◽  
Jianwei Ma ◽  
Shaohua Wu

Electrospun nanofiber mats have attracted intense attention as advanced wound dressing materials. The objective of this study was to fabricate methacrylated gelatin (MeGel)/poly(L-lactic acid) (PLLA) hybrid nanofiber mats with an extracellular matrix (ECM) mimicking nanofibrous structure and hydrogel-like properties for potential use as wound dressing materials. MeGel was first synthesized via the methacryloyl substitution of gelatin (Gel), a series of MeGel and PLLA blends with various mass ratios were electrospun into nanofiber mats, and a UV crosslinking process was subsequently utilized to stabilize the MeGel components in the nanofibers. All the as-crosslinked nanofiber mats exhibited smooth and bead-free fiber morphologies. The MeGel-containing and crosslinked nanofiber mats presented significantly improved hydrophilic properties (water contact angle = 0°; 100% wettability) compared to the pure PLLA nanofiber mats (~127°). The swelling ratio of crosslinked nanofiber mats notably increased with the increase of MeGel (143.6 ± 7.4% for PLLA mats vs. 875.0 ± 17.1% for crosslinked 1:1 MeGel/PLLA mats vs. 1135.2 ± 16.0% for crosslinked MeGel mats). The UV crosslinking process was demonstrated to significantly improve the structural stability and mechanical properties of MeGel/PLLA nanofiber mats. The Young’s modulus and ultimate strength of the crosslinked nanofiber mats were demonstrated to obviously decrease when more MeGel was introduced in both dry and wet conditions. The biological tests showed that all the crosslinked nanofiber mats presented great biocompatibility, but the crosslinked nanofiber mats with more MeGel were able to notably promote the attachment, growth, and proliferation of human dermal fibroblasts. Overall, this study demonstrates that our MeGel/PLLA blend nanofiber mats are attractive candidates for wound dressing material research and application.


Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4413
Author(s):  
Marcin Bartkowiak ◽  
Zbigniew Czech ◽  
Hyun-Joong Kim ◽  
Gyu-Seong Shim ◽  
Małgorzata Nowak ◽  
...  

The use of ultraviolet radiation (UV) technology for the crosslinking of acrylic pressure-sensitive adhesives (PSA) is the one of various crosslinking methods, being the alternative to the conventional crosslinking process of solvent-based acrylic systems. It also requires a photoinitiator to absorb the impinging UV and induce photocrosslinking. As previously mentioned, a photoinitiator is one of the important and necessary components in UV-inducted crosslinking of acrylic pressure-sensitive adhesives. The activity of multifunctional conventional saturated photoinitiators of type I and type II, especially benzophenone-based in the photoreactive UV-crosslinkable acrylic PSA was described. The effect of the multifunctional type-II photoinitiators on the acrylic PSA, such as tack, peel adhesion and shear strength were summarized.


Author(s):  
Qianheng Jin ◽  
Guangzhe Jin ◽  
Jihui Ju ◽  
Lei Xu ◽  
Linfeng Tang ◽  
...  

Three-dimensional (3D) bioprinting shows great potential for autologous vascular grafts due to its simplicity, accuracy, and flexibility. 6mm diameter vascular grafts are used in clinic. However, producing small-diameter vascular grafts are still an enormous challenge. Normally, sacrificial hydrogels are used as temporary lumen support to mold tubular structure which will affect the structure’s stability. In this study, we develop a new bioprinting approach to fabricating small-diameter vessel using two-step crosslinking process. ¼ lumen wall of bioprinted gelatin mechacrylate (GelMA) flat structure is exposed to ultraviolet (UV) light briefly for having certain strength, while ¾ lumen wall shows as concave structure remained uncrosslinked. Pre-crosslinked flat structure is merged towards the uncrosslinked concave structure. Two individual structures will be combined tightly into an intact tubular structure by receiving more UV exposure time. Complicated tubular structures are constructed by these method. Notably, the GelMA-based bioink loaded with smooth muscle cells (SMCs) are bioprinted as the outer layer and human umbilical vein endothelial cells (HUVECs) are seeded onto the inner surface. A bionic vascular vessel with dual layers is fabricated successfully and keeps good viability, and functionality. This study may provide a novel idea for fabricating biomimetic vascular network or other more complicated organs.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sina Sharifi ◽  
Hannah Sharifi ◽  
Ali Akbari ◽  
James Chodosh

AbstractGelatin methacryloyl (GelMA) is one of the most widely used photo-crosslinkable biopolymers in tissue engineering. In in presence of an appropriate photoinitiator, the light activation triggers the crosslinking process, which provides shape fidelity and stability at physiological temperature. Although ultraviolet (UV) has been extensively explored for photo-crosslinking, its application has been linked to numerous biosafety concerns, originated from UV phototoxicity. Eosin Y, in combination with TEOA and VC, is a biosafe photoinitiation system that can be activated via visible light instead of UV and bypasses those biosafety concerns; however, the crosslinking system needs fine-tuning and optimization. In order to systematically optimize the crosslinking conditions, we herein independently varied the concentrations of Eosin Y [(EY)], triethanolamine (TEOA), vinyl caprolactam (VC), GelMA precursor, and crosslinking times and assessed the effect of those parameters on the properties the hydrogel. Our data showed that except EY, which exhibited an optimal concentration (~ 0.05 mM), increasing [TEOA], [VA], [GelMA], or crosslinking time improved mechanical (tensile strength/modulus and compressive modulus), adhesion (lap shear strength), swelling, biodegradation properties of the hydrogel. However, increasing the concentrations of crosslinking reagents ([TEOA], [VA], [GelMA]) reduced cell viability in 3-dimensional (3D) cell culture. This study enabled us to optimize the crosslinking conditions to improve the properties of the GelMA hydrogel and to generate a library of hydrogels with defined properties essential for different biomedical applications.


Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 211
Author(s):  
Rebeca Leu Leu Alexa ◽  
Raluca Ianchis ◽  
Diana Savu ◽  
Mihaela Temelie ◽  
Bogdan Trica ◽  
...  

Biocompatibility, biodegradability, shear tinning behavior, quick gelation and an easy crosslinking process makes alginate one of the most studied polysaccharides in the field of regenerative medicine. The main purpose of this study was to obtain tissue-like materials suitable for use in bone regeneration. In this respect, alginate and several types of clay were investigated as components of 3D-printing, nanocomposite inks. Using the extrusion-based nozzle, the nanocomposites inks were printed to obtain 3D multilayered scaffolds. To observe the behavior induced by each type of clay on alginate-based inks, rheology studies were performed on composite inks. The structure of the nanocomposites samples was examined using Fourier Transform Infrared Spectrometry and X-ray Diffraction (XRD), while the morphology of the 3D-printed scaffolds was evaluated using Electron Microscopy (SEM, TEM) and Micro-Computed Tomography (Micro-CT). The swelling and dissolvability of each composite scaffold in phosfate buffer solution were followed as function of time. Biological studies indicated that the cells grew in the presence of the alginate sample containing unmodified clay, and were able to proliferate and generate calcium deposits in MG-63 cells in the absence of specific signaling molecules. This study provides novel information on potential manufacturing methods for obtaining nanocomposite hydrogels suitable for 3D printing processes, as well as valuable information on the clay type selection for enabling accurate 3D-printed constructs. Moreover, this study constitutes the first comprehensive report related to the screening of several natural clays for the additive manufacturing of 3D constructs designed for bone reconstruction therapy.


Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3918
Author(s):  
Kwan-Woo Kim ◽  
Hye-Min Lee ◽  
Seong-Hyun Kang ◽  
Byung-Joo Kim

In this study, activated carbon fibers (ACFs) were prepared using a new method from polyethylene (PE) fibers. The stabilizing (or crosslinking) process of PE, an essential step, was achieved through a hybrid treatment using electron-beam/sulfuric acid at 110 °C that was more effective than the traditional method of using sulfuric acid at 180 °C for polyolefin. The stabilized precursor was then carbonized at 700 °C and activated at 900 °C with different activation times. The structural characteristics and morphologies of these ACFs were observed using an X-ray diffractometer and a field-emission scanning electron microscope, respectively. In addition, the N2/77K adsorption isotherm was used to discern textural properties. The total pore volume and specific surface area of these ACFs were found to be increased with a longer activation time, reaching final values of 0.99 cm3/g and 1750 m2/g, respectively. These ACFs also exhibited a high mesopore volume ratio (39%) according to crosslinking and crystallite formation conditions.


2021 ◽  
Vol 2021 ◽  
pp. 164-170
Author(s):  
H.K. Güler ◽  
F.C. Çallıoğlu

In this study, it was achieved that crosslinking of PVP/GEL nanofibers with two-steps. Crosslinking is a process highly important for water-soluble polymers in terms of application areas and mechanical properties. Firstly, crosslinking of PVP polymers experimental studies were carried out via heat treatment at different temperatures and times. Then, GEL polymers were crosslinked with GTA vapour at different times. Morphological analysis was carried out via SEM images and chemical characteristics were determined via FT-IR analysis. Moreover, after the crosslinking process, SD and WL values were calculated. All results showed that before crosslinking of SEM images, nanofibers were smooth, fine and without beads. The average fiber diameter is 196 nm and the fiber diameter distribution is quite uniform. After crosslinking of SEM images, it is expected that all nanowebs will turn from fibrous surfaces to membranous. Generally, SD and WL values decrease with crosslinking time increase. According to all of the SEM images, SD and WL values, optimum conditions were determined for PVP as 4 hours at 180oC and for GEL as 24 hours. Lastly, the presence of PVP and GEL polymers in the nanofiber structure was verified chemically with FT-IR analysis.


Author(s):  
Adrian Krzysztof Antosik ◽  
Karolina Mozelewska ◽  
Marta Piątek-Hnat ◽  
Zbigniew Czech ◽  
Marcin Bartkowiak

AbstractThe purpose of this work was to obtain single-sided tapes with different concentrations of kaolin and to check its impact on the self-adhesive properties of commercial adhesives. The most important self-adhesive properties were examined, such as tack, peel adhesion, shear strength, shrinkage, and thermal resistance. Tapes based on silicone PSAs with kaolin can be used in many branches of industry to bond elements operating at elevated temperatures, i.e., in aeronautics, aerospace including solar cells for satellites and space stations. There are few reports on one-sided adhesive tapes based on silicones with the addition of kaolin. However, taking into account the number of their potential applications, we did self-adhesive tests and explained how kaolin affects them. In addition, the reactivity of the crosslinking compound and silicone adhesive during the crosslinking process and the thermal effects of this process were also examined. In connection with the various applications of the obtained tapes, also the flammability and heat of combustion were tested, in accordance with applicable standards. As a result of the tests, one-sided self-adhesive tapes with new properties (increased temperature resistance, less shrinkage, and increased resistance to flammability) were obtained.


Sign in / Sign up

Export Citation Format

Share Document