scholarly journals Frequency Distribution of Void Ratio of Granular Materials Determined by an Image Analyzer

1990 ◽  
Vol 30 (1) ◽  
pp. 1-16 ◽  
Author(s):  
Shobha K. Bhatia ◽  
Aly F. Soliman
Author(s):  
Khalid Al-Shibli ◽  
Emir José Macari ◽  
Stein Sture

This study focuses on the use of digital image techniques to evaluate and develop quantitative measures of fabric for fine-grained granular materials to assess degrees of homogeneity and isotropy. The description of a procedure performed to prepare homogeneous cylindrical sand specimens is presented. Two techniques were performed to investigate the homogeneity. The specimens were preserved with an ultralow viscosity embedding epoxy resin, and they were allowed to cure prior to dissection for subsequent detailed analysis of the internal fabric. Digital imaging techniques were used to process and analyze various sections of the specimens. The analysis consisted of studying two specific fabric characteristics of the soil: particle orientation and local void ratio. Frequency distribution charts were plotted to assess the degrees of homogeneity and isotropy. Other invasive techniques were also used in some cases to assess the repeatability of the specimen preparation technique. Results indicate that the specimens were prepared with a high degree of homogeneity. Some degree of spatial variation was observed in the local void ratio evaluation.


1990 ◽  
Vol 68 (6) ◽  
pp. 2280-2286 ◽  
Author(s):  
H. Lum ◽  
I. Huang ◽  
W. Mitzner

The effect of continuous inflation of lungs at 30 cmH2O transpulmonary pressure (Ptp) on air-space size was assessed by chord length-frequency distribution analysis. Lungs from gerbils were excised, allowed to collapse freely, and inflated to 30 cmH2O Ptp in a humidified chamber kept at 37 degrees C. When the lungs appeared fully inflated with no observable pleural surface atelectasis, the left lung was occluded while the right was maintained at 30 cmH2O for 10 min longer and then occluded. During this time, the right lung increased its volume from 70 to 100%. Then both lungs were quick frozen, freeze dried, and embedded in glycol methacrylate, and 1- to 2-microns-thick histological sections cut. Lungs from a control group of gerbils were similarly inflated to 30 cmH2O, both left and right were occluded, the left was quick frozen immediately, and the right was frozen 10 min later. Chord lengths of air spaces from cranial and caudal lobes of lungs were acquired using a Dapple Systems image analyzer, and a two-population frequency distribution was generated for analysis with an IBM PC. The results indicate that the volume increase during continuous inflation at 30 cmH2O Ptp was associated with a shift in the chord length distribution toward the smaller chord lengths. A two-population statistical analysis indicated that the inflation resulted in an increase in the relative proportion of smaller chord lengths, with no increase in the mean of this smaller population. We conclude that continuous inflation at 30 cmH2O Ptp results in alveolar recruitment.


2013 ◽  
Vol 663 ◽  
pp. 441-446
Author(s):  
Lu Lu Chi ◽  
Jian Min Qin ◽  
Xue Feng Chen

The mechanical responses of granular materials are affected significantly by the properties of the individual particle. In order to establish the link between the micro and macro parameters, series of numerical biaxial simulations are carried out using two-dimensional discrete element method. The microscale mechanisms of mechanical behavior of granular materials are investigated through sensitivity analyses. The key influence of microscale parameters on the strength and deformation are discussed respectively. The peak strength depends on void ratio, friction coefficient and confining stress significantly. The elastic modulus is affected by friction coefficient, confining pressure and stiffness ratio, especially when the friction coefficient ranges from 0.1 to 0.3. The samples with different initial void ratio under the same loading condition can finally achieve the same critical state; the critical states at micro and macro scale are both independent of the initial void ratio.


1978 ◽  
Vol 100 (1) ◽  
pp. 1-4 ◽  
Author(s):  
R. L. Barker ◽  
M. H. Brown ◽  
D. W. Lyons

An optical scanning system was used to obtain considerable information related to the fineness and fiber to fiber fineness variability of various samples of natural and man-made staple fibers. The adaptation and use of this system is described as various techniques for presenting an assembly of fibers for automatic optical analysis are considered. Frequency distribution curves of the diameters distribution of several different fibers were defined by using the image analyzer to scan the magnified images of fibers. These data are discussed as the fineness variability of the different staple fibers are analyzed and compared.


Sign in / Sign up

Export Citation Format

Share Document