Cryptanalysis of a novel bitwise XOR rotational algorithm and security for IoT devices

Author(s):  
Seema Nath ◽  
Subhranil Som ◽  
Mukesh Chandra Negi

The internet of things (IoT) is a multiple devices, which connects with the internet for communication, in order to obtain the updated from the cloud. The fog can act as a controller and it is located between the IoT devices and cloud. The major attacks like de-synchronization, and disclosure has arises in the devices, this has been prevented. The major contribution in this work is key generation and authentication, for key generation the “advanced encryption standard algorithm” is developed, in which the new and old keys are generated. The encryption is done under the source side, and decryption is done under the device side. The fog security is maintained through “device tag, and bit wise XOR rotational algorithm”. The security, and the computational complexity is defined in this work and it is given in table format. The implementations are carried out in the MATLAB R2016 a. The proposed algorithm is compared with the existing protocols like LMAP, M2AP, EMAP, SASI, and RAPP, from the comparison the proposed methodology makes the better knowledge about the security and prevents from various attacks.

Author(s):  
Vasireddy Vennela

Lightweight cryptography is a new concept for securing data more effectively while using fewer resources and providing greater throughput, conservatism, and low battery consumption. Every fraction second, the Internet of Things (IoT), which connects billions of objects, generates massive amounts of data. As the number of devices grows, so does the amount of data generated, and the security of that data becomes a concern. In IoT architecture, gadgets are essentially smaller and low-powered. Because of their complexity, traditional encryption methods are computationally expensive and take many rounds to encrypt, basically wasting the limited energy of IoT devices. However, a less sophisticated method may jeopardise the intended fidelity. There are various lightweight cryptography techniques available, and we choose one of the symmetric encryption techniques known as Advanced Encryption Standard (AES). The speed of this algorithm is six times that of triple DES.


Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2674 ◽  
Author(s):  
Mike Yuliana ◽  
Wirawan ◽  
Suwadi

One solution to ensure secrecy in the Internet of Things (IoT) is cryptography. However, classical cryptographic systems require high computational complexity that is not appropriate for IoT devices with restricted computing resources, energy, and memory. Physical layer security that utilizes channel characteristics is an often used solution because it is simpler and more efficient than classical cryptographic systems. In this paper, we propose a signal strength exchange (SSE) system as an efficient key generation system and a synchronized quantization (SQ) method as a part of the SSE system that synchronizes data blocks in the quantization phase. The SQ method eliminates the signal pre-processing phase by performing a multi-bit conversion directly from the channel characteristics of the measurement results. Synchronization is carried out between the two authorized nodes to ensure sameness of the produced keys so it can eliminate the error-correcting phase. The test results at the IoT devices equipped with IEEE 802.11 radio show that SSE system is more efficient in terms of computing time and communication overhead than existing systems.


2018 ◽  
Author(s):  
Henry Tranter

Security is always at the forefront of developing technologies. One can seldom go a week without hearing of a new data breach or hacking attempt from various groups around the world, often taking advantage of a simple flaw in a system’s architecture. The Internet of Things (IoT) is one of these developing technologies which may be at risk of such attacks. IoT devices are becoming more and more prevalent in everyday life. From keeping track of an individual’s health, to suggesting meals from items available in an individual’s fridge, these technologies are taking a much larger role in the personal lives of their users. With this in mind, how is security being considered in the development of these technologies? Are these devices that monitor individual’s personal lives just additional vectors for potential data theft? Throughout this survey, various approaches to the development of security systems concerning IoT devices in the home will be discussed, compared, and contrasted in the hope of providing an ideal solution to the problems this technology may produce.


Author(s):  
Clinton Fernandes ◽  
Vijay Sivaraman

This article examines the implications of selected aspects of the Telecommunications (Interception and Access) Amendment (Data Retention) Act 2015, which was passed by the Australian Parliament in March 2015. It shows how the new law has strengthened protections for privacy. However, focusing on the investigatory implications, it shows how the law provides a tactical advantage to investigators who pursue whistleblowers and investigative journalists. The article exposes an apparent discrepancy in the way ‘journalist’ is defined across different pieces of legislation. It argues that although legislators’ interest has been overwhelmingly focused on communications data, the explosion of data generated by the so-called Internet-of-Things (IoT) is as important or more. It shows how the sensors in selected IoT devices lead to a loss of user control and will enable non-stop, involuntary and ubiquitous monitoring of individuals. It suggests that the law will need to be amended further once legislators and investigators’ knowledge of the potential of IoT increases. 


Author(s):  
Tanweer Alam

In next-generation computing, the role of cloud, internet and smart devices will be capacious. Nowadays we all are familiar with the word smart. This word is used a number of times in our daily life. The Internet of Things (IoT) will produce remarkable different kinds of information from different resources. It can store big data in the cloud. The fog computing acts as an interface between cloud and IoT. The extension of fog in this framework works on physical things under IoT. The IoT devices are called fog nodes, they can have accessed anywhere within the range of the network. The blockchain is a novel approach to record the transactions in a sequence securely. Developing a new blockchains based middleware framework in the architecture of the Internet of Things is one of the critical issues of wireless networking where resolving such an issue would result in constant growth in the use and popularity of IoT. The proposed research creates a framework for providing the middleware framework in the internet of smart devices network for the internet of things using blockchains technology. Our main contribution links a new study that integrates blockchains to the Internet of things and provides communication security to the internet of smart devices.


2018 ◽  
Author(s):  
Henry Tranter

Security is always at the forefront of developing technologies. One can seldom go a week without hearing of a new data breach or hacking attempt from various groups around the world, often taking advantage of a simple flaw in a system’s architecture. The Internet of Things (IoT) is one of these developing technologies which may be at risk of such attacks. IoT devices are becoming more and more prevalent in everyday life. From keeping track of an individual’s health, to suggesting meals from items available in an individual’s fridge, these technologies are taking a much larger role in the personal lives of their users. With this in mind, how is security being considered in the development of these technologies? Are these devices that monitor individual’s personal lives just additional vectors for potential data theft? Throughout this survey, various approaches to the development of security systems concerning IoT devices in the home will be discussed, compared, and contrasted in the hope of providing an ideal solution to the problems this technology may produce.


2019 ◽  
Vol 92 ◽  
pp. 101744 ◽  
Author(s):  
George Margelis ◽  
Xenofon Fafoutis ◽  
George Oikonomou ◽  
Robert Piechocki ◽  
Theo Tryfonas ◽  
...  

Author(s):  
Kundankumar Rameshwar Saraf ◽  
Malathi P. Jesudason

This chapter explores the encryption techniques used for the internet of things (IoT). The security algorithm used for IoT should follow many constraints of an embedded system. Hence, lightweight cryptography is an optimum security solution for IoT devices. This chapter mainly describes the need for security in IoT, the concept of lightweight cryptography, and various cryptographic algorithms along with their shortcomings given IoT. This chapter also describes the principle of operation of all the above algorithms along with their security analysis. Moreover, based on the algorithm size (i.e., the required number of gate equivalent, block size, key size, throughput, and execution speed of the algorithm), the chapter reports the comparative analysis of their performance. The chapter discusses the merits and demerits of these algorithms along with their use in the IoT system.


Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6761
Author(s):  
Anjan Bandyopadhyay ◽  
Vikash Kumar Singh ◽  
Sajal Mukhopadhyay ◽  
Ujjwal Rai ◽  
Fatos Xhafa ◽  
...  

In the Internet of Things (IoT) + Fog + Cloud architecture, with the unprecedented growth of IoT devices, one of the challenging issues that needs to be tackled is to allocate Fog service providers (FSPs) to IoT devices, especially in a game-theoretic environment. Here, the issue of allocation of FSPs to the IoT devices is sifted with game-theoretic idea so that utility maximizing agents may be benign. In this scenario, we have multiple IoT devices and multiple FSPs, and the IoT devices give preference ordering over the subset of FSPs. Given such a scenario, the goal is to allocate at most one FSP to each of the IoT devices. We propose mechanisms based on the theory of mechanism design without money to allocate FSPs to the IoT devices. The proposed mechanisms have been designed in a flexible manner to address the long and short duration access of the FSPs to the IoT devices. For analytical results, we have proved the economic robustness, and probabilistic analyses have been carried out for allocation of IoT devices to the FSPs. In simulation, mechanism efficiency is laid out under different scenarios with an implementation in Python.


2020 ◽  
pp. 1260-1284
Author(s):  
Laura Belli ◽  
Simone Cirani ◽  
Luca Davoli ◽  
Gianluigi Ferrari ◽  
Lorenzo Melegari ◽  
...  

The Internet of Things (IoT) is expected to interconnect billions (around 50 by 2020) of heterogeneous sensor/actuator-equipped devices denoted as “Smart Objects” (SOs), characterized by constrained resources in terms of memory, processing, and communication reliability. Several IoT applications have real-time and low-latency requirements and must rely on architectures specifically designed to manage gigantic streams of information (in terms of number of data sources and transmission data rate). We refer to “Big Stream” as the paradigm which best fits the selected IoT scenario, in contrast to the traditional “Big Data” concept, which does not consider real-time constraints. Moreover, there are many security concerns related to IoT devices and to the Cloud. In this paper, we analyze security aspects in a novel Cloud architecture for Big Stream applications, which efficiently handles Big Stream data through a Graph-based platform and delivers processed data to consumers, with low latency. The authors detail each module defined in the system architecture, describing all refinements required to make the platform able to secure large data streams. An experimentation is also conducted in order to evaluate the performance of the proposed architecture when integrating security mechanisms.


Sign in / Sign up

Export Citation Format

Share Document