scholarly journals Surgical Treatments and Immediate Denture Prior to Comprehensive Oral Rehabilitation

2018 ◽  
Vol 2 (1) ◽  
pp. 433-441
Author(s):  
Paulina Salazar
Keyword(s):  
Point Of View ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Sinus Lift ◽  
Oral Rehabilitation ◽  
Implant Placement ◽  
Comprehensive Rehabilitation ◽  
Mandibular Teeth ◽  
Left Maxillary Sinus ◽  
Surgical Treatments

Commonly after the early loss of teeth, extractions, presence of periodontal disease, or pneumatization of the sinus cavities, bone resorption occurs leading to atrophy of the alveolar ridge. This presents several challenges from the point of view of implant and rehabilitation when planning implant placement and rehabilitation. However at present the procedures for the solution of these problems with the use of bone graft, either autologous or xenograft allow predictable results. The aim of this case report is to describe the surgical procedures prior to the comprehensive rehabilitation treatment of female patient, 53 years old, partially toothed jaw and mandibular teeth overall. The extraction of all the upper teeth along the jaw ridge preservation using autogenous graft and xenograft bone tissue, besides the left maxillary sinus lift, culminating with the insertion of an immediate acrylic maxillary prosthesis was performed.

scholarly journals Oral Rehabilitation of a Severely Resorbed Edentulous Maxilla with Screwed-retained Hybrid Denture Using Cresco System: A Case Report

2008 ◽  
Vol 02 (03) ◽  
pp. 220-223 ◽  
Author(s):  
Ilser Turkyilmaz ◽  
Neal S. Patel ◽  
Edwin A. McGlumphy
Keyword(s):  
Sinus Lift ◽  
Oral Rehabilitation ◽  
Maxillary Bone ◽  
System A ◽  
Implant Placement ◽  
Metal Framework ◽  
Posterior Maxilla ◽  
Mandibular Teeth ◽  
Implant Treatment ◽  
Tilted Implant

ABSTRACTDue to the angulation of maxillary bone as the maxillary bone resorption occurs from a buccal to palatal direction, bucco-lingually tilted implant placement is more likely especially in the posterior maxilla. The aim of this paper was to present a case restored by using a maxillary hybrid denture using Cresco method. A 59-year-old woman with an edentulous maxilla and five missing mandibular teeth was referred for implant treatment. Six months after sinus lift operation, four mandibular implants and six maxillary implants were placed. Due to the bucco-lingual tilt of two implants, the Cresco method was chosen to fabricate the metal framework for the maxillary hybrid denture that was delivered four months after implant placement. The main advantages of the Cresco method are a perfectly passive framework fit and corrected screw access holes. All ten implants placed were considered successful at 1-year recall, and no screw access holes were seen in the buccal part of the maxillary acrylic teeth.It was concluded that such screw-retained maxillary hybrid denture using the Cresco method met the esthetic expectations of a highly demanding patient. (Eur J Dent 2008;2:220-223)

scholarly journals The Use of Autogenous Teeth for Alveolar Ridge Preservation: A Literature Review

2021 ◽  
Vol 11 (4) ◽  
pp. 1853
Author(s):  
João Cenicante ◽  
João Botelho ◽  
Vanessa Machado ◽  
José João Mendes ◽  
Paulo Mascarenhas ◽  
...  
Keyword(s):  
Ridge Preservation ◽  
Graft Material ◽  
Alveolar Ridge ◽  
Natural Consequence ◽  
Oral Rehabilitation ◽  
Future Directions ◽  
The Past ◽  
Alveolar Ridge Preservation ◽  
Functional Consequences ◽  
Teeth Extraction

Alveolar ridge resorption is a natural consequence of teeth extraction, with unpleasant aesthetic and functional consequences that might compromise a future oral rehabilitation. To minimize the biological consequences of alveolar ridge resorption, several surgical procedures have been designed, the so-called alveolar ridge preservation (ARP) techniques. One important characteristic is the concomitant use of biomaterial in ARP. In the past decade, autogenous teeth as a bone graft material in post-extraction sockets have been proposed with very interesting outcomes, yet with different protocols of preparation. Here we summarize the available evidence on autogenous teeth as a biomaterial in ARP, its different protocols and future directions.

Efficacy of Alveolar Ridge Preservation: A Randomized Controlled Trial

2020 ◽  
Vol 99 (4) ◽  
pp. 402-409 ◽  
Author(s):  
G. Avila-Ortiz ◽  
M. Gubler ◽  
M. Romero-Bustillos ◽  
C.L. Nicholas ◽  
M.B. Zimmerman ◽  
...  
Keyword(s):  
Tooth Extraction ◽  
Alveolar Bone ◽  
Controlled Trial ◽  
Control Group ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Bone Augmentation ◽  
Randomized Controlled ◽  
Implant Placement ◽  
Alveolar Ridge Preservation

Alveolar ridge preservation (ARP) therapy is indicated to attenuate the physiologic resorptive events that occur as a consequence of tooth extraction with the purpose of facilitating tooth replacement therapy. This randomized controlled trial was primarily aimed at testing the efficacy of ARP as compared with unassisted socket healing. A secondary objective was to evaluate the effect that local phenotypic factors play in the volumetric reduction of the alveolar bone. A total of 53 subjects completed the study. Subjects were randomized into either the control group, which involved only tooth extraction (EXT n = 27), or the experimental group, which received ARP using a combination of socket grafting with a particulate bone allograft and socket sealing with a nonabsorbable membrane (dPTFE) following tooth extraction (ARP n = 26). A set of clinical, linear, volumetric, implant-related, and patient-reported outcomes were assessed during a 14-wk healing period. All linear bone assessments (horizontal, midbuccal, and midlingual reduction) revealed that ARP is superior to EXT. Likewise, volumetric bone resorption was significantly higher in the control group (mean ± SD: EXT = −15.83% ± 4.48%, ARP = −8.36% ± 3.81%, P < 0.0001). Linear regression analyses revealed that baseline buccal bone thickness is a strong predictor of alveolar bone resorption in both groups. Interestingly, no significant differences in terms of soft tissue contour change were observed between groups. Additional bone augmentation to facilitate implant placement in a prosthetically acceptable position was deemed necessary in 48.1% of the EXT sites and only 11.5% of the ARP sites ( P < 0.004). Assessment of perceived postoperative discomfort at each follow-up visit revealed a progressive decrease over time, which was comparable between groups. Although some extent of alveolar ridge remodeling occurred in both groups, ARP therapy was superior to EXT as it was more efficacious in the maintenance of alveolar bone and reduced the estimated need for additional bone augmentation at the time of implant placement (ClinicalTrials.gov NCT01794806).

scholarly journals Alveolar Ridge Preservation Using Leukocyte and Platelet-Rich Fibrin: A Report of a Case

2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Mogammad Thabit Peck ◽  
Johan Marnewick ◽  
Lawrence Stephen
Keyword(s):  
Wound Healing ◽  
Disease Transmission ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Platelet Rich Fibrin ◽  
Implant Placement ◽  
Alveolar Ridge Preservation ◽  
Tissue Changes ◽  
Risk Of Disease ◽  
Soft Tissue Changes

In order for a dental implant to be restored optimally, it must be placed in an ideal anatomic position. However, this is not always possible, since physiological wound healing after tooth removal, often results in hard and soft tissue changes which ultimately compromises ideal implant placement. With the aim of minimising the need for tissue augmentation, several alveolar ridge preservation (ARP) techniques have been developed. These often require the use of grafting material and therefore increase the risk of disease transmission. Leukocyte and platelet-rich fibrin (L-PRF) is a newly developed platelet concentrate that is prepared from the patient's own blood. Clinical research has indicated that it improves wound healing and stimulates bone formation. We present a case where L-PRF was successfully used in an ARP procedure to facilitate implant placement in a compromised extraction socket.

scholarly journals Styloid Process Elongation or Eagle’s Syndrome: Is There Any Role for Ectopic Calcification?

2008 ◽  
Vol 02 (03) ◽  
pp. 224-228 ◽  
Author(s):  
Cumali Gokce ◽  
Yildiray Sisman ◽  
Murat Sipahioglu
Keyword(s):  
Styloid Process ◽  
Ectopic Calcification ◽  
Sinus Lift ◽  
Eagle’S Syndrome ◽  
Maxillary Bone ◽  
Implant Placement ◽  
Metal Framework ◽  
Posterior Maxilla ◽  
Mandibular Teeth ◽  
Implant Treatment

ABSTRACTDue to the angulation of maxillary bone as the maxillary bone resorption occurs from a buccal to palatal direction, bucco-lingually tilted implant placement is more likely especially in the posterior maxilla. The aim of this paper was to present a case restored by using a maxillary hybrid denture using Cresco method. A 59-year-old woman with an edentulous maxilla and five missing mandibular teeth was referred for implant treatment. Six months after sinus lift operation, four mandibular implants and six maxillary implants were placed. Due to the bucco-lingual tilt of two implants, the Cresco method was chosen to fabricate the metal framework for the maxillary hybrid denture that was delivered four months after implant placement. The main advantages of the Cresco method are a perfectly passive framework fit and corrected screw access holes. All ten implants placed were considered successful at 1-year recall, and no screw access holes were seen in the buccal part of the maxillary acrylic teeth.It was concluded that such screw-retained maxillary hybrid denture using the Cresco method met the esthetic expectations of a highly demanding patient. (Eur J Dent 2008;2:220-223)

scholarly journals Associations among Primary Stability, Histomorphometric Findings, and Bone Density: A Prospective Randomized Study after Alveolar Ridge Preservation with a Collagen Cone

2020 ◽  
Vol 8 (4) ◽  
pp. 112
Author(s):  
Sigmar Schnutenhaus ◽  
Werner Götz ◽  
Jens Dreyhaupt ◽  
Heike Rudolph ◽  
Ralph G. Luthardt ◽  
...  
Keyword(s):  
Bone Density ◽  
Tooth Extraction ◽  
Randomized Study ◽  
Primary Stability ◽  
Collagen Membrane ◽  
Ridge Preservation ◽  
Alveolar Ridge ◽  
Implant Placement ◽  
Randomized Clinical Study ◽  
Alveolar Ridge Preservation

Background: The objective of this investigation was to examine whether determination of bone density (BD) with a cone beam computed tomography (CBCT) scan could help predict the primary stability (PS) of the implants and to investigate whether associations between the histomorphometric findings and the CBCT scan could be observed. Materials and methods: In this randomized clinical study, the efficacy of alveolar ridge preservation (ARP) with a combination of a collagen cone and a collagen membrane procedure after tooth extraction was investigated. CBCT scans were obtained after a healing period of 8 (±1) weeks. Subsequently, the CBCT scans were evaluated in terms of BD at different heights of the former socket. Eleven (±1) weeks after tooth extraction, implant placement was performed and PS was measured with resonance frequency analysis. Potential associations among the radiologically measured BD, the histomorphometric results, and the PS were analyzed. Results: No direct association was observed between the radiologically determined BD and the histomorphometric findings. No significant associations could be found between the BD and the PS. Conclusion: No significant associations were observed among the BD determined by the CBCT, the histomorphometric findings, and the PS.

Sign in / Sign up

Export Citation Format

Share Document