scholarly journals Substantiation of Polymer Materials for the Use in Plow Constructions

2020 ◽  
pp. 102-107
Author(s):  
Oleksii Derkach ◽  
◽  
Oleh Kabat ◽  
Dmytro Makarenko ◽  
Borys Kharchenko ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Polymer Composite ◽  
Physical And Mechanical Properties ◽  
Polymer Composite Material ◽  
Polymer Materials ◽  
Initial Sample ◽  
Pyrolytic Decomposition ◽  
Initial Sample Weight

The purpose of the work is to study and determine material "TEKRONE" belonging to the group of polymers, substantiate such a polymer composite material (PCM) in the modernization of the plow blade, which is not inferior to the "TEKRONE" composite and is much cheaper. This requires the study of the physical and mechanical properties of the material. The following studies of the physical and mechanical properties of the "TEKRONE" material have been conducted: density, heat endurance, and tensile strength. It has been found out that when heated over an open flame, the polymer softens with subsequent melting. There is no charring, destruction in the solid state. Therefore, the TEKRONE material is a thermoplastic. After pyrolytic decomposition 0.5… 0.7% of the initial sample weight remains. PCM TEKRONE density is 954 kg/m3. The value of this parameter coincides with the polyethylene density, which, depending on the brand, varies from 910 to 980 kg/m3. The tensile strength stress of the investigated samples of PCM TEKRONE is 17.9 MPa, which is very close to the values of polyethylene (14.8-17.0 MPa). The laboratory studies have shown that TEKRONE polymer-composite material in its properties corresponds to the materials based on polyethylene. It is determined that the closest in properties are PE 500 and PE 1000 polyethylene. It is advisable to recommend the use of PE 500 and PE 1000 polyethylene as a basis for the manufacture of plow blade of PLN type.

Formation of mechanical properties of polymer composite materials with different types of hybrid matrices

2021 ◽  
pp. 28-34
Author(s):  
E. A. Kosenko ◽  
◽  
P. E. Demin ◽  
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Polymer Composite ◽  
Strength Properties ◽  
Polymer Composite Material ◽  
Polymer Materials ◽  
Polymer Composite Materials ◽  
Hybrid Matrix ◽  
The Matrix

The mechanical properties of polymer composite materials largely depend on the interfacial phenomena occurring on the interface between the matrix and reinforcing material. The addition of components to the matrix of polymer composite materials that retain their viscoelastic state during the molding process of the products makes possible to locally change the deformation-and-strength properties of a finished product, adapting it to the specified operating conditions. The viscoelastic components in the hybrid matrix form the third phase of the polymer composite material. Increasing the efficiency of interfacial layers of polymer composite materials with various types of hybrid matrices is the most important task of their development. The samples for microanalysis of the polymer composite material structure with various types of hybrid matrices were molded using the prepreg technology by vacuum molding on the basis of BT400 biaxial basalt fabric. Technical wax, anaerobic (Loctite 638) and organosilicon (Yunisil-9628) polymer materials were selected as the viscoelastic components of the hybrid matrix. In order to explain the reasons for the change in the deformation-and-strength properties of the obtained basalt plastics with various viscoelastic components in the composition of the hybrid matrix, microanalysis of their structure was carried out. A mechanism for choosing a scheme for the location of viscoelastic components in a matrix of polymer composite materials based on the provisions of combinatorial optimization is described.

scholarly journals MICROSTRUCTURE RESEARCH OF THE UNIDIRECTIONAL ORGANOPLASTIC BASED ON RUSAR-NT ARAMID FIBERS AND EPOXY-POLYSULFONE BINDER

2020 ◽  
pp. 19-26
Author(s):  
E.N. Kablov ◽  
◽  
G.S. Kulagina ◽  
G.F. Zhelezina ◽  
S.L. Lonskii ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Polymer Matrix ◽  
Packing Density ◽  
Tensile Tests ◽  
Polymer Composite Material ◽  
Aramid Fibers ◽  
Before And After ◽  
Binder Structure

This paper studies a polymer composite material - a unidirectional organoplastic based on Rusar-NT aramid fiber and a melt epoxy-polysulfone binder. Organoplastic has the following mechanical properties: tensile strength 2060 MPa, Young's modulus 101 GPa. The microstructure of the fiber and the polymer matrix in the organoplastic samples was studied before and after tensile tests. The features of the formation of the binder structure depending on the packing density of the fibers in organoplastics have been determined. The nature of the destruction of fibers and polymer matrix caused by the uniaxial tension has been studied.

scholarly journals Mechanical Properties of GFR & Graphite Epoxy Polymer Composites

2020 ◽  
Vol 5 (6) ◽  
pp. 560-565
Author(s):  
A. Aakash ◽  
S. Selvaraj
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Polymer Composite ◽  
Epoxy Polymer ◽  
Significant Degree ◽  
Polymer Composite Material ◽  
Water Ingestion ◽  
Selection Of

Composite materials have the great potential and widely used as building material in numerous applications. Polymer composite material obtains the necessary properties in a controlled significant degree by the selection of strands and lattice. The properties of the materials have been selected by choosing the correct proportion of matrix and reinforcements. To build the quality of the material by expanding the fiber substance of the material. In this current examination, the mechanical properties of the glass fiber and graphite is strengthened with epoxy polymer composite were considered. Here the open embellishment method was received for the manufacture of the polymer composite The mechanical properties, for example, rigidity, compression quality, sway quality and water ingestion test was resolved according to the ASTM norms. The mechanical properties were improved as the filaments support content expanded in the grid material.

scholarly journals Selection of composite material in thin-walled structures operating at elevated temperatures

2018 ◽  
pp. 87-97
Author(s):  
F. K. Abdrakhmanov ◽  
D. R. Volosov ◽  
S. A. Karpuzikov ◽  
S. A. Koytov ◽  
V. N. Melnikov ◽  
...  
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Polymer Composite ◽  
Carbon Fibers ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Polymer Composite Material ◽  
Specific Strength ◽  
Thin Walled Structures ◽  
Temperature Dependences

At present, of special interest are polymer composite materials reinforced with carbon fibers - carbon fiber-reinforced plastic, which have increased specific strength, rigidity, wear resistance, etc. The purpose of this research is to study the physical and mechanical properties of composite materials reinforced with carbon and aramid fibers. According to the obtained temperature dependences of σ and E, we have selected the optimal variant of the polymer composite material on the basis of a nano-modified epoxy binder reinforced with carbon fibers

Investigation of mechanical properties of auxetic woven polymer composite material

2018 ◽  
Vol 49 (2) ◽  
pp. 206-209 ◽  
Author(s):  
M. Hussain ◽  
Y. Nawab ◽  
Z. Rizwan ◽  
A. Mumtaz ◽  
A. Basit
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Polymer Composite ◽  
Polymer Composite Material
Sign in / Sign up

Export Citation Format

Share Document