THE ROLE OF COMPOST AND WATER STRESS AND THE SYSTEM OF SURFACE AND SUBSURFACE DRIP IRRIGATION VEGETATIVE AND PLANT GROWTH CHARACTERISTICS OF POTATO PLANT

2020 ◽  
pp. 41-58
Keyword(s):  
Water Stress ◽  
Drip Irrigation ◽  
Potato Plant ◽  
Irrigation System ◽  
Total Yield ◽  
Seed Priming ◽  
Subsurface Drip Irrigation ◽  
Irrigation Level ◽  
Subsurface Drip

A field experiment was conducted in Ramadi, Anbar province, western Iraq, in soil with a Silt Loam soil during the autumn season 2018, to study the role of compost, water stress and the surface and subsurface drip irrigation system. 50, 75 and 100% of the net irrigation depth. In the design of the splintered splinters, the transactions were divided according to the design of the complete random sections and by three replicates. Each sector was divided into two main parts, in which the compost was distributed. 1 - Without adding 2 - Addition of 10 tons’ e- 1. Each was divided into two secondary pieces. 2. Sub-surface irrigation Each secondary subdivision was divided into three sub-sub-sections as experimental units where irrigation levels 50, 75 and 100% of the net depth of the irrigation were distributed. Use the American Type A evaporation pond at the irrigation time. The results showed that the level of addition of 10 tons e-1 led to a significant increase in all indicators of the study number of air legs and paper area and the weight of the tuber and the number of tubers and the marketable and the total number of 2.38 stem plant -1, 72.75 dm 2, 124.2 g and 4.84 darn plant - 131.46 tons e-1 and 42.95 tons e-1 sequentially. The average number of air stems, paper area, weight of tuber, number of tubers, marketable value and total yield of potato plant at the irrigation level were significantly higher than 100% of the net depth of the broth, reaching 2.41 stem plant-1, 65.92 dm 2, 136.7 g, 4.89, Ton e-1 and 42.55 tons e-1 sequentially. The average number of air stems, paper area, weight of tuber, tubers, marketable, and total of subsurface irrigation was also higher than 2.34 stem plant -1,68.04 dm 2, 147.7 g, 4.79,32.39 tons e-1, and 42. 13 tons e-1 sequentially, genotype and seed priming in improving seedling performance to tolerate salt stress.

scholarly journals ROLE OF COMPOST AND IRRIGATION WATER QUANTITY ON SOME PHYSICAL PROPERTIES OF SOIL UNDER SURFACE, SUBSURFACE DRIP IRRIGATION

2020 ◽  
Vol 51 (5) ◽  
pp. 1300-1307
Author(s):  
Al-Shamari & et al.
Keyword(s):  
Physical Properties ◽  
Irrigation Water ◽  
Drip Irrigation ◽  
Irrigation System ◽  
Block Design ◽  
Subsurface Drip Irrigation ◽  
Subsurface Drip ◽  
Irrigation Levels ◽  
Properties Of Soil

A field experiment was conducted in Ramadi district - Al-Anbar province during the autumn season of 2018. to study the role of compost (sheep residues) and irrigation levels in some physical properties of soil and water consumption a potato under surface and subsurface drip irrigation system. Randomized Complete Block Design (RCBD) in arrangement of a split- split-plot with  three replication were used.The results showed that the addition of 10 Mg.h-1  resulted in a significant decrease in bulk density (BD) values of 1.12 Mg m-3, and increase in the values of (MWD) and (Ks) to reach 1.47 mm and 10.3 cm. hr -1 respectively. The addition of 50% of the NID reduced the BD to 1.24 Mg m-3, The MWD and SHC were significantly higher to reach 1.24 mm and 8.1 cm hr-1 respectively. WHC increased with increasing of amount of irrigation water as it reached the highest value of 265.66 mm season-1 when adding 100% of the NID. The BD values decreased, whereas MWD and SWC increased under subsurface irrigation (SUBDI) treatment to be 1.23 Mg m-3, 1.24 mm and 8.4 cm hr-1, respectively.

scholarly journals Predicting Wetting Patterns in Soil from a Single Subsurface Drip Irrigation System

2019 ◽  
Vol 25 (9) ◽  
pp. 41-53
Author(s):  
Heba Najem Abid ◽  
Maysoon Basheer Abid
Keyword(s):  
Drip Irrigation ◽  
Sandy Loam ◽  
Irrigation System ◽  
Subsurface Drip Irrigation ◽  
Statistical Parameters ◽  
Model Efficiency ◽  
Loam Soil ◽  
Wetted Area ◽  
Soil Wetting ◽  
Subsurface Drip

Soil wetted pattern from a subsurface drip plays great importance in the design of subsurface drip irrigation (SDI) system for delivering the required water directly to the roots of the plant. An equation to estimate the dimensions of the wetted area in soil are taking into account water uptake by roots is simulated numerically using HYDRUS (2D/3D) software. In this paper, three soil textures namely loamy sand, sandy loam, and loam soil were used with three different types of crops tomato, pepper, and cucumber, respectively, and different values of drip discharge, drip depth, and initial soil moisture content were proposed. The soil wetting patterns were obtained at every thirty minutes for a total time of irrigation equal to three hours. Equations for wetted width and depth were predicted and evaluated by utilizing the statistical parameters (model efficiency (EF), and root mean square error (RMSE)). The model efficiency was more than 95%, and RMSE did not exceed 0.64 cm for three soils. This shows that evolved formula can be utilized to describe the soil wetting pattern from SDI system with good accuracy.      

Can Subsurface Drip Irrigation (SDI) be a Competitive Irrigation System in the Great Plains Region for Commodity Crops?

2010 ◽  
Author(s):  
Freddie R Lamm ◽  
Paul D Colaizzi ◽  
James P Bordovsky ◽  
Todd P Trooien ◽  
Juan Enciso-Medina ◽  
...  
Keyword(s):  
Great Plains ◽  
Drip Irrigation ◽  
Irrigation System ◽  
Subsurface Drip Irrigation ◽  
Subsurface Drip

Role of irrigation and wastewater reuse: comparison of subsurface irrigation and furrow irrigation

2004 ◽  
Vol 50 (2) ◽  
pp. 61-68 ◽  
Author(s):  
C. Choi ◽  
I. Song ◽  
S. Stine ◽  
J. Pimentel ◽  
C. Gerba
Keyword(s):  
Drip Irrigation ◽  
Arid Regions ◽  
Irrigation System ◽  
Soil Surface ◽  
Furrow Irrigation ◽  
Subsurface Drip Irrigation ◽  
Vegetable Crops ◽  
Viral Contamination ◽  
Subsurface Drip ◽  
Semi Arid

Two different irrigation systems, subsurface drip irrigation and furrow irrigation, are tested to investigate the level of viral contamination and survival when tertiary effluent is used in arid and semi-arid regions. The effluent was injected with bacteriophages of PRD1 and MS2. A greater number of PRD1 and MS2 were recovered from the lettuce in the subsurface drip-irrigated plots as compared to those in the furrow-irrigated plots. Shallow drip tape installation and preferential water paths through cracks on the soil surface appeared to be the main causes of high viral contamination in subsurface drip irrigation plots, which led to the direct contact of the lettuce stems with the irrigation water which penetrated the soil surface. The water use efficiency of the subsurface drip irrigation system was higher than that of the furrow irrigation system. Thus, subsurface drip irrigation is an efficient irrigation method for vegetable crops in arid and semi-arid regions if viral contamination can be reduced. Deeper installation of drip tapes, frequent irrigations, and timely harvests based on cumulative heat units may further reduce health risks by ensuring viral die-off under various field conditions.

scholarly journals A Subsurface Drip Irrigation System for Weighing Lysimetry

2018 ◽  
Vol 34 (1) ◽  
pp. 213-221 ◽  
Author(s):  
Steven R. Evett ◽  
Gary W. Marek ◽  
Paul D. Colaizzi ◽  
Brice B. Ruthardt ◽  
Karen S. Copeland
Keyword(s):  
Drip Irrigation ◽  
Irrigation System ◽  
Application Rate ◽  
Mass Change ◽  
Subsurface Drip Irrigation ◽  
Irrigation Season ◽  
Irrigation Application ◽  
Subsurface Drip ◽  
New System ◽  
Viscosity Changes

Abstract. Large, precision weighing lysimeters can have accuracies as good as 0.04 mm equivalent depth of water, adequate for hourly and even half-hourly determinations of evapotranspiration (ET) rate from crops. Such data are important for testing and improving simulation models of the complex interactions of surface water and energy balances, soil physics, plant growth, and biophysics that determine crop ET in response to rapid microclimate dynamics. When crops are irrigated with sprinkler systems or other rapid additions of water, the irrigation event is typically short enough that not much ET data are compromised by the lysimeter mass change due to irrigation. In contrast, subsurface drip irrigation (SDI) systems may take many hours to apply an irrigation, during which time the lysimeter mass change is affected by both ET rate and irrigation application rate. Given that irrigation application rate can be affected by pressure dynamics of the irrigation system, emitter clogging and water viscosity changes with temperature over several-hour periods, it can be difficult to impossible to separate the ET signal from the interference of the irrigation application. The inaccuracies in the data can be important, particularly for comparisons of sprinkler and SDI systems, since they are of the order of 8 to 10% of daily ET. We developed an SDI irrigation system to apply irrigations of up to 50 mm to large weighing lysimeters while limiting the period of lysimeter mass change due to irrigation delivery to approximately ten minutes by storing the water needed for irrigation in tanks suspended from the lysimeter weighing system. The system applied water at the same rate as the SDI system in the surrounding field, allowed irrigation over periods of any duration, but often exceeding 12 h, without directly affecting lysimeter mass change and the accuracy of ET rate determinations, and allowed irrigation overnight without compromising lysimeter daily ET measurements. Errors in lysimeter ET measurements using the previous SDI system, which was directly connected to the field irrigation system, were up to 10% of daily ET compared with negligible error using the new system. Errors using the previous, directly connected, SDI system varied over time due to variable system pressure, and possibly due to water temperature (viscosity) changes and emitter clogging. With the new system, all of the water transferred to the lysimeter weighing system was eventually applied by the SDI system regardless of temperature, pressure, or emitter clogging. Differences between planned and applied irrigation depth were less than 2% over the irrigation season. Keywords: Evapotranspiration, ET, Subsurface drip irrigation, SDI, Weighing lysimeter.

Sign in / Sign up

Export Citation Format

Share Document