scholarly journals In vitro and in vivo studies of controlled release of novel peptide from in situ polymer precipitation delivery system

2014 ◽  
Author(s):  
Soo Ghim Lim
Keyword(s):  
Controlled Release ◽  
Delivery System ◽  
In Vivo Studies ◽  
Polymer Precipitation

Bosentan Monohydrate Vesicles Loaded Transdermal Drug Delivery System: In Vitro In Vivo Evaluation

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Revathi M. ◽  
Indira Y.
Keyword(s):  
Controlled Release ◽  
Delivery System ◽  
Ex Vivo ◽  
In Vitro Release ◽  
In Vivo Studies ◽  
In Vivo Evaluation ◽  
Vitro Release ◽  
Transdermal Route

This study elucidates the enhancement of the permeation of bosentan monohydrate through skin by encapsulating it in vesicles loaded transdermal delivery system. Niosomal vesicles were formulated by ether injection method. Formulation FN7 (span 60: cholesterol: poloxamer 401, 1.25:1:0.25) showed maximum entrapment efficiency of 96.7±0.037% and was optimized for loading in to transdermal system. Transdermal systems were formulated using both hydrophilic and hydrophobic polymers like HPMC, HEC and EC. Formulation F1 with HPMC was optimized based on in vitro release (99.21±1.45 %) and was further evaluated for ex-vivo permeation. The results indicate that the ex vivo release (98.13±1.65%) was as par with in vitro release and followed zero order super case- II transport mechanism. The in vivo studies were done on New Zealand male rabbits for oral and transdermal route. The results inferred no significant change in half-life of drug but a substantial difference in Tmax, AUC and MRT was observed in transdermal systems. A two fold increase in AUC was observed in transdermal route (18.609±7.251µg/ml/h) when compared to oral route (9.644±5.621µg/ml/h). A controlled release was attained up to 35h and reservoir effect was observed and this may be due to the barrier properties of skin. Drug encapsulated niosomes were released in to the skin by loosening the lipid layers and the surfactant acted as penetration enhancer. The study infers that niosomes loaded transdermal patches of bosentan monohydrate can enhance the bioavailability and provided controlled release for better therapeutic efficacy and safety of drug.

Comparison of the intestinal absorption and bioavailability of γ-tocotrienol and α-tocopherol: in vitro, in situ and in vivo studies

2012 ◽  
Vol 33 (5) ◽  
pp. 246-256 ◽  
Author(s):  
Bilal S. Abuasal ◽  
Hisham Qosa ◽  
Paul W. Sylvester ◽  
Amal Kaddoumi
Keyword(s):  
Intestinal Absorption ◽  
In Vivo Studies

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

Novel Self-Micro Emulsifying Drug Delivery System for safe intra muscular delivery with improved pharmacodynamics and pharmacokinetics

2021 ◽  
Vol 18 ◽  
Author(s):  
Subheet Kumar Jain ◽  
Neha Panchal ◽  
Amrinder Singh ◽  
Shubham Thakur ◽  
Navid Reza Shahtaghi ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Inflammatory Diseases ◽  
Diclofenac Sodium ◽  
Physical Stability ◽  
In Vivo Studies ◽  
High Concentration

Background: Diclofenac sodium (DS) injection is widely used in the management of acute or chronic pain and inflammatory diseases. It incorporates 20 % w/v Transcutol-P as a solubilizer to make the stable injectable formulation. However, the use of Transcutol-P in high concentration leads to adverse effects such as severe nephrotoxicity, etc. Some advancements resulted in the formulation of an aqueous based injectable but that too used benzyl alcohol reported to be toxic for human use. Objective: To develop an injectable self-micro emulsifying drug delivery system (SMEDDS) as a novel carrier of DS for prompt release with better safety and efficacy. Methods: A solubility study was performed with different surfactants and co-surfactants. The conventional stirring method was employed for the formulation of SMEDDS. Detailed in vitro characterization was done for different quality control parameters. In vivo studies were performed using Wistar rats for pharmacokinetic evaluation, toxicological analysis, and analgesic activity. Results: The optimized formulation exhibited good physical stability, ideal globule size (156±0.4 nm), quick release, better therapeutics, and safety, increase in LD50 (221.9 mg/kg) to that of the commercial counterpart (109.9 mg/kg). Further, pre-treatment with optimized formulation reduced the carrageenan-induced rat paw oedema by 88±1.2 % after 4 h, compared to 77±1.6 % inhibition with commercial DS formulation. Moreover, optimized formulation significantly (p<0.05) inhibited the pain sensation in the acetic-acid induced writhing test in mice compared to its commercial equivalent with a better pharmacokinetic profile. Conclusion: The above findings confirmed that liquid SMEDDS could be a successful carrier for the safe and effective delivery of DS

scholarly journals Fabrication of Injectable, Porous Hyaluronic Acid Hydrogel Based on an In-Situ Bubble-Forming Hydrogel Entrapment Process

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1138
Author(s):  
Lixuan Wang ◽  
Shiyan Dong ◽  
Yutong Liu ◽  
Yifan Ma ◽  
Jingjing Zhang ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Regenerative Medicine ◽  
In Vivo Studies ◽  
Injectable Hydrogels ◽  
Cell Behaviors ◽  
Porous Architecture ◽  
In Situ Hydrogel

Injectable hydrogels have been widely applied in the field of regenerative medicine. However, current techniques for injectable hydrogels are facing a challenge when trying to generate a biomimetic, porous architecture that is well-acknowledged to facilitate cell behaviors. In this study, an injectable, interconnected, porous hyaluronic acid (HA) hydrogel based on an in-situ bubble self-generation and entrapment process was developed. Through an amide reaction between HA and cystamine dihydrochloride activated by EDC/NHS, CO2 bubbles were generated and were subsequently entrapped inside the substrate due to a rapid gelation-induced retention effect. HA hydrogels with different molecular weights and concentrations were prepared and the effects of the hydrogel precursor solution’s concentration and viscosity on the properties of hydrogels were investigated. The results showed that HA10-10 (10 wt.%, MW 100,000 Da) and HA20-2.5 (2.5 wt.%, MW 200,000 Da) exhibited desirable gelation and obvious porous structure. Moreover, HA10-10 represented a high elastic modulus (32 kPa). According to the further in vitro and in vivo studies, all the hydrogels prepared in this study show favorable biocompatibility for desirable cell behaviors and mild host response. Overall, such an in-situ hydrogel with a self-forming bubble and entrapment strategy is believed to provide a robust and versatile platform to engineer injectable hydrogels for a variety of applications in tissue engineering, regenerative medicine, and personalized therapeutics.

In vitro Controlled Release of two new Tuberculocidal Adamantane Aminoethers from Solid Pharmaceutical Formulations (II)

Drug Research ◽  
2017 ◽  
Vol 67 (11) ◽  
pp. 653-660 ◽  
Author(s):  
Marilena Vlachou ◽  
Angeliki Siamidi ◽  
Dimitrios Spaneas ◽  
Dimitrios Lentzos ◽  
Polixeni Ladia ◽  
...  
Keyword(s):  
Controlled Release ◽  
In Vitro Release ◽  
Pharmaceutical Formulations ◽  
Adamantane Derivative ◽  
In Vivo Studies ◽  
Matrix Tablet ◽  
The Us ◽  
Vitro Release

AbstractThe aim of the present investigation was to develop matrix tablet formulations for the in vitro controlled release of two new tuberculocidal adamantane aminoethers (compounds III and IV), congeneric to the adamantane derivative SQ109, which is in final clinical trials, and aminoethers (I) and (II), using carefully selected excipients, such as polyvinylpyrrolidone, sodium alginate and lactose. The tablets were prepared using the direct compression method and dissolution experiments were conducted using the US Pharmacopoeia type II apparatus (paddle method) in gastric and intestinal fluids. The results suggest that both analogues, albeit more lipophilic than SQ109, and aminoethers (I) and (II), have the requisite in vitro release characteristics for oral administration. In conclusion, these formulations merit further assessment by conducting in vivo studies, at a later stage.

Sign in / Sign up

Export Citation Format

Share Document