scholarly journals Seismic Assessment in a Historical Masonry Minaret by Linear and Non-linear Seismic Analyses

2020 ◽  
Author(s):  
Emin Hökelekli ◽  
Ali Demir ◽  
Emre Ercan ◽  
Halil Nohutçu ◽  
Abdurrahman Karabulut
Keyword(s):  
Finite Element ◽  
Modal Analysis ◽  
Dynamic Properties ◽  
Ground Motions ◽  
Element Model ◽  
Operational Modal Analysis ◽  
Finite Element Models ◽  
Non Linear ◽  
Concrete Damage ◽  
Historical Masonry

Operational Modal Analysis (OMA) method is frequently used in order to determine dynamical properties of historical masonry structures. In this study, damage pattern of historical Alaca minaret which is selected as application is investigated under different ground motions by updating finite element models (FEM) depending on operational modal analysis test. Initial Finite element model was prepared in ABAQUS V10 program and numerical dynamic characteristics of minaret were determined. In addition, experimental dynamic properties of minaret were provided by operational modal analysis. Initial numerical model of brick masonry structure was calibrated via OMA method. Then, linear and non-linear seismic analyses of calibrated FEM of historical minaret were performed by using different earthquakes acceleration records that occurred in Turkey. Concrete Damage Plasticity model was taken into account in non-linear seismic analyses. As a result of the analyses, it is concluded that the stresses obtained with linear analyses aren’t as realistic as the non-linear analyses results and the earthquakes can cause some damages in the minaret.  

Comparing Measured Responses of an Offshore Structure with Operational Modal Analysis assisted Classical Model Approach

2020 ◽  
pp. 1-10
Author(s):  
Bruna Nabuco ◽  
Sandro D. Amador ◽  
Evangelos I. Katsanos ◽  
Ulf T. Tygesen ◽  
Erik Damgaard Christensen ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Modal Analysis ◽  
Element Model ◽  
Operating Conditions ◽  
Operational Modal Analysis ◽  
Mode Shapes ◽  
Wave Forces ◽  
Wave Load ◽  
Offshore Structure

Abstract Aiming to ensure the structural integrity of an offshore structure, wave-induced responses have been measured during normal operating conditions. Operational Modal Analysis is applied to the data obtained from continuously monitoring the structure. Sensors placed only on the topside of an offshore platform are sufficient to provide information to identify the modal properties of the structure, such as natural frequencies, damping ratios, and mode shapes. A finite element model is created and updated in line with the identified dynamic properties for applying a modal expansion technique in the interest of accessing information at any point of the structure. Wave radars are also placed at the platform from which the wave forces are calculated based on basic industrial standard models. In this way, the wave kinematics are estimated according to the linear wave theory associated with Wheeler stretching. Since this study is related to offshore structures composed by slender elements, the wave forces are estimated using Morison formulation. By assigning typical values to the drag and inertia coefficients, wave loads are estimated and applied to the updated finite element model. For the diffraction effect, the wave load has also been evaluated according to MacCamy and Fuchs theory. The responses obtained from this procedure are compared with measured responses. In addition to describing the process, this paper presents a case study to verify the theory using monitoring data from a tripod jacket. Results indicate realistic response estimation that contributes to the knowledge about the state of the structure.

Study on Modal Analysis for Motorcycle Frame by CAE Method

2014 ◽  
Vol 496-500 ◽  
pp. 601-604
Author(s):  
Jing Wang ◽  
Yong Wang ◽  
Ying Hua Liao
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Modal Analysis ◽  
Experimental Method ◽  
Dynamic Properties ◽  
Element Model ◽  
Analytic Method ◽  
Motorcycle Frame ◽  
The Finite Element Model ◽  
Good Agreement

In this paper, the modal of motorcycle frame is analyzed by using the analytic method and experimental method. The results show that the dynamic properties of the finite element model are in good agreement with the experiment and the finite element model was reliable and accurate.

scholarly journals Operational Modal Analysis: A Tool for Assessing Changes on Structural Health State of Historical Constructions after Consolidation and Reinforcement Works—Jura Chapel (Jerez de la Frontera, Spain)

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Manuel Romero ◽  
Pablo Pachón ◽  
Víctor Compán ◽  
Margarita Cámara ◽  
Francisco Pinto
Keyword(s):  
Modal Analysis ◽  
Dynamic Properties ◽  
Operational Modal Analysis ◽  
Ambient Vibration ◽  
Mode Shapes ◽  
Health Improvement ◽  
Health State ◽  
Structural Behaviour ◽  
Structural Health ◽  
Historical Masonry

Today’s society is sensitive to the architectural heritage conservation. This implies to perform works to maintain these buildings and to assure their structural security. In the last years, the structural analysis of historical masonry constructions has experienced a great progress, thanks to the use of techniques based on the study of the dynamic properties of building structures. In this context, changes on the structural health state of a building are one of the elements that can be assessed considering changes on their dynamic properties. This is useful to evaluate the effectiveness of structural interventions on this kind of buildings by analysing these properties before and after it. This paper focuses on the Jura Chapel, in Jerez de la Frontera (Spain). This chapel is part of San Juan de los Caballeros Church and is dated from the 15th century. In 2015 and after the identification of some structural damages in the chapel vault, an intervention was initiated to improve its structural behaviour and to recover its original appearance. The present work reports the evaluation of the effects that this intervention has on the structural health state of the building, using nondestructive techniques based on ambient vibration tests (AVT) and Operational Modal Analysis (OMA). The AVT were performed for both prerestored and restored states and under environmental loads. A discussion about the validity of doing AVT from extrados when a vault presents disconnection between ribs and web is included in the paper. As a result, the first five natural frequency values have increased while the corresponding mode shapes have not changed significantly. This proves a structural health improvement caused by the repairing process without changing the original behaviour of the structure. This work shows OMA capabilities for evaluating the effectiveness of intervention works on the health state of a historical masonry structure.

Sign in / Sign up

Export Citation Format

Share Document