ABSTRACTThe Basalt Waste Isolation Project is conducting experiments to assess the stability of bentonite (sodium montmorillonite)and crushed basalt as waste package packing materials in a nuclear waste repository in basalt. The experiments are designed to identify changes in physical, chemical, and mineralogical properties that these materials could undergo in the repository environment. A series of bentonite dehy-dration experiments showed that after 1 year at 370°C the clay's structural and swelling properties were preserved and only reversible dehydration occurred. At 440°C, however, irreversible dehydration, collapse of the clay structure, and loss of swelling ability took place. Hydrothermal tests using bentonite, or an equal mixture of bentonite and basalt, along with synthetic groundwater, were also conducted. Abentonite + water experiment showed negligible structural alteration at 200°C, although some iron enrichment of the clay occurred. At 300°C, partial conversion of the mont-morillonite to an iron- and potassium-rich smectite occurred, along with the formation of secondary quartz and albite. An experiment in the basalt + bentonite + water system at 150°C resulted in partial etching of the basalt grains, but no detectable change in rock or clay mineralogy. At 300°C, the basalt was strongly etched. Furthermore, iron- and potassium-rich smectite apparently replaced montmorillonite as the dominant clay, and secondary silica, zeolites, and minor feldspar were formed. These mineral assemblages are thought to be metastable at 300°C, based on natural analogs. The kinetics and reaction paths of further transformations of packing materials are important areas for continued study.
Experimental Studies on Boring Ability of Oryzaephilus surinamensis Linné, Plodia interpunctella Hübner and Cadra cautella Walker on Packing Materials
