scholarly journals On the electrooxidation of glucose on gold: towards an electrochemical glucaric acid production as value-added chemical

2021 ◽  
Author(s):  
Nicolas Schlegel ◽  
Gustav Wiberg ◽  
Matthias Arenz
Keyword(s):  
Catalyst Surface ◽  
Gold Catalyst ◽  
Carbon Sources ◽  
Value Added ◽  
Rotating Disk ◽  
Rotating Disk Electrode ◽  
Glucaric Acid ◽  
Fossil Carbon ◽  
Consumption Rates ◽  
Polycrystalline Gold

The electrocatalytic oxidation of glucose to value-added chemicals, such as glucaric acid, has gathered increased interest in recent years. Glucose oxidation is a promising process which has the potential to contribute to establishing renewable resources as alternatives to fossil carbon sources. Herein, we present rotating disk electrode (RDE) studies on polycrystalline gold surfaces and subsequent Koutecký-Levich analysis as a benchmark to expand the understanding of reaction kinetics and competition between glucose, reaction intermediates and OH- at the catalyst surface. Combining electrochemical studies and Raman spectroscopy, it is shown that increasing glucose concentrations lead to a delayed oxidation of the gold catalyst surface, presumably by increased consumption rates of Au-hydroxide species.

Fabrication and Characterization of Nife Thin Film Composition Modulated Alloys

1996 ◽  
Vol 451 ◽  
Author(s):  
S. D. Leith ◽  
D. T. Schwartz
Keyword(s):  
Rotation Rate ◽  
Stripping Voltammetry ◽  
Rotating Disk ◽  
Oscillation Period ◽  
Rotating Disk Electrode ◽  
Disk Rotation ◽  
Rate Oscillation ◽  
Composition And Structure ◽  
Spatially Periodic

ABSTRACTDescribed are results showing that an oscillating flow-field can induce spatially periodic composition variations in electrodeposited NiFe films. Flow-induced NiFe composition modulated alloys (CMA's) were deposited on the disk of a rotating disk electrode by oscillating the disk rotation rate during galvanostatic plating. Deposit composition and structure were investigated using potentiostatic stripping voltammetry and scanning probe microscopy. Results illustrate a linear relationship between the composition modulation wavelength and the flow oscillation period. CMA's with wavelengths less than 10 nm can be fabricated when plating with a disk rotation rate oscillation period less than 3 seconds.

scholarly journals Consolidated bioprocessing of lignocellulose for production of glucaric acid by an artificial microbial consortium

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Chaofeng Li ◽  
Xiaofeng Lin ◽  
Xing Ling ◽  
Shuo Li ◽  
Hao Fang
Keyword(s):  
Acid Production ◽  
Microbial Consortium ◽  
Consolidated Bioprocessing ◽  
High Titer ◽  
Value Added ◽  
Superior Performance ◽  
Glucaric Acid ◽  
Practical Applications ◽  
Work Distribution ◽  
Rut C30

Abstract Background The biomanufacturing of d-glucaric acid has attracted increasing interest because it is one of the top value-added chemicals produced from biomass. Saccharomyces cerevisiae is regarded as an excellent host for d-glucaric acid production. Results The opi1 gene was knocked out because of its negative regulation on myo-inositol synthesis, which is the limiting step of d-glucaric acid production by S. cerevisiae. We then constructed the biosynthesis pathway of d-glucaric acid in S. cerevisiae INVSc1 opi1Δ and obtained two engineered strains, LGA-1 and LGA-C, producing record-breaking titers of d-glucaric acid: 9.53 ± 0.46 g/L and 11.21 ± 0.63 g/L d-glucaric acid from 30 g/L glucose and 10.8 g/L myo-inositol in fed-batch fermentation mode, respectively. However, LGA-1 was preferable because of its genetic stability and its superior performance in practical applications. There have been no reports on d-glucaric acid production from lignocellulose. Therefore, the biorefinery processes, including separated hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF) and consolidated bioprocessing (CBP) were investigated and compared. CBP using an artificial microbial consortium composed of Trichoderma reesei (T. reesei) Rut-C30 and S. cerevisiae LGA-1 was found to have relatively high d-glucaric acid titers and yields after 7 d of fermentation, 0.54 ± 0.12 g/L d-glucaric acid from 15 g/L Avicel and 0.45 ± 0.06 g/L d-glucaric acid from 15 g/L steam-exploded corn stover (SECS), respectively. In an attempt to design the microbial consortium for more efficient CBP, the team consisting of T. reesei Rut-C30 and S. cerevisiae LGA-1 was found to be the best, with excellent work distribution and collaboration. Conclusions Two engineered S. cerevisiae strains, LGA-1 and LGA-C, with high titers of d-glucaric acid were obtained. This indicated that S. cerevisiae INVSc1 is an excellent host for d-glucaric acid production. Lignocellulose is a preferable substrate over myo-inositol. SHF, SSF, and CBP were studied, and CBP using an artificial microbial consortium of T. reesei Rut-C30 and S. cerevisiae LGA-1 was found to be promising because of its relatively high titer and yield. T. reesei Rut-C30 and S. cerevisiae LGA-1were proven to be the best teammates for CBP. Further work should be done to improve the efficiency of this microbial consortium for d-glucaric acid production from lignocellulose.

scholarly journals Eco-Friendly Nitrogen-Doped Graphene Preparation and Design for the Oxygen Reduction Reaction

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3858
Author(s):  
Monica Dan ◽  
Adriana Vulcu ◽  
Sebastian A. Porav ◽  
Cristian Leostean ◽  
Gheorghe Borodi ◽  
...  
Keyword(s):  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Rotating Disk ◽  
Reduction Reaction ◽  
Machine Learning Algorithms ◽  
Rotating Disk Electrode ◽  
X Ray ◽  
Synthesis Conditions ◽  
Characterization Techniques ◽  
Doped Graphene

Four N-doped graphene materials with a nitrogen content ranging from 8.34 to 13.1 wt.% are prepared by the ball milling method. This method represents an eco-friendly mechanochemical process that can be easily adapted for industrial-scale productivity and allows both the exfoliation of graphite and the synthesis of large quantities of functionalized graphene. These materials are characterized by transmission and scanning electron microscopy, thermogravimetry measurements, X-ray powder diffraction, X-ray photoelectron and Raman spectroscopy, and then, are tested towards the oxygen reduction reaction by cyclic voltammetry and rotating disk electrode methods. Their responses towards ORR are analysed in correlation with their properties and use for the best ORR catalyst identification. However, even though the mechanochemical procedure and the characterization techniques are clean and green methods (i.e., water is the only solvent used for these syntheses and investigations), they are time consuming and, generally, a low number of materials can be prepared, characterized and tested. In order to eliminate some of these limitations, the use of regression learner and reverse engineering methods are proposed for facilitating the optimization of the synthesis conditions and the materials’ design. Thus, the machine learning algorithms are applied to data containing the synthesis parameters, the results obtained from different characterization techniques and the materials response towards ORR to quickly provide predictions that allow the best synthesis conditions or the best electrocatalysts’ identification.

scholarly journals Enhancing the thermostability and activity of uronate dehydrogenase from Agrobacterium tumefaciens LBA4404 by semi-rational engineering

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Hui-Hui Su ◽  
Fei Peng ◽  
Pei Xu ◽  
Xiao-Ling Wu ◽  
Min-Hua Zong ◽  
...  
Keyword(s):  
Agrobacterium Tumefaciens ◽  
Rational Design ◽  
Glucuronic Acid ◽  
Specific Activity ◽  
Value Added ◽  
Catalytic Efficiency ◽  
Site Directed Mutagenesis ◽  
Glucaric Acid ◽  
Triple Mutant ◽  
Pharmaceutical Industries

Abstract Background Glucaric acid, one of the aldaric acids, has been declared a “top value-added chemical from biomass”, and is especially important in the food and pharmaceutical industries. Biocatalytic production of glucaric acid from glucuronic acid is more environmentally friendly, efficient and economical than chemical synthesis. Uronate dehydrogenases (UDHs) are the key enzymes for the preparation of glucaric acid in this way, but the poor thermostability and low activity of UDH limit its industrial application. Therefore, improving the thermostability and activity of UDH, for example by semi-rational design, is a major research goal. Results In the present work, three UDHs were obtained from different Agrobacterium tumefaciens strains. The three UDHs have an approximate molecular weight of 32 kDa and all contain typically conserved UDH motifs. All three UDHs showed optimal activity within a pH range of 6.0–8.5 and at a temperature of 30 °C, but the UDH from A. tumefaciens (At) LBA4404 had a better catalytic efficiency than the other two UDHs (800 vs 600 and 530 s−1 mM−1). To further boost the catalytic performance of the UDH from AtLBA4404, site-directed mutagenesis based on semi-rational design was carried out. An A39P/H99Y/H234K triple mutant showed a 400-fold improvement in half-life at 59 °C, a 5 °C improvement in $$ {\text{T}}_{ 5 0}^{ 1 0} $$ T 50 10 value and a 2.5-fold improvement in specific activity at 30 °C compared to wild-type UDH. Conclusions In this study, we successfully obtained a triple mutant (A39P/H99Y/H234K) with simultaneously enhanced activity and thermostability, which provides a novel alternative for the industrial production of glucaric acid from glucuronic acid.

scholarly journals Rapid electrochemical detection of Escherichia coli using nickel oxidation reaction on a rotating disk electrode

2021 ◽  
Vol 411 ◽  
pp. 128453
Author(s):  
Ashwin Ramanujam ◽  
Bertrand Neyhouse ◽  
Rebecca A. Keogh ◽  
Madhivanan Muthuvel ◽  
Ronan K. Carroll ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Electrochemical Detection ◽  
Oxidation Reaction ◽  
Rotating Disk ◽  
Rotating Disk Electrode ◽  
Disk Electrode ◽  
Nickel Oxidation
Sign in / Sign up

Export Citation Format

Share Document