scholarly journals The 1974 West Flank Eruption of Mount Etna: A Data-Driven Model for a Low Elevation Effusive Event

2020 ◽  
Vol 8 ◽  
Author(s):  
Charline Lormand ◽  
Andrew J. L. Harris ◽  
Magdalena Oryaëlle Chevrel ◽  
Sonia Calvari ◽  
Lucia Gurioli ◽  
...  

Low elevation flank eruptions represent highly hazardous events due to their location near, or in, communities. Their potentially high effusion rates can feed fast moving lava flows that enter populated areas with little time for warning or evacuation, as was the case at Nyiragongo in 1977. The January–March 1974 eruption on the western flank of Mount Etna, Italy, was a low elevation effusive event, but with low effusion rates. It consisted of two eruptive phases, separated by 23 days of quiescence, and produced two lava flow fields. We describe the different properties of the two lava flow fields through structural and morphological analyses using UAV-based photogrammetry, plus textural and rheological analyses of samples. Phase I produced lower density (∼2,210 kg m−3) and crystallinity (∼37%) lavas at higher eruption temperatures (∼1,080°C), forming thinner (2–3 m) flow units with less-well-developed channels than Phase II. Although Phase II involved an identical source magma, it had higher densities (∼2,425 kg m−3) and crystallinities (∼40%), and lower eruption temperatures (∼1,030°C), forming thicker (5 m) flow units with well-formed channels. These contrasting properties were associated with distinct rheologies, Phase I lavas having lower viscosities (∼103 Pa s) than Phase II (∼105 Pa s). Effusion rates were higher during Phase I (≥5 m3/s), but the episodic, short-lived nature of each lava flow emplacement event meant that flows were volume-limited and short (≤1.5 km). Phase II effusion rates were lower (≤4 m3/s), but sustained effusion led to flow units that could still extend 1.3 km, although volume limits resulted from levee failure and flow avulsion to form new channels high in the lava flow system. We present a petrologically-based model whereby a similar magma fed both phases, but slower ascent during Phase II may have led to greater degrees of degassing resulting in higher cooling-induced densities and crystallinities, as well as lower temperatures. We thus define a low effusion rate end-member scenario for low elevation effusive events, revealing that such events are not necessarily of high effusion rate and velocity, as in the catastrophic event scenarios of Etna 1669 or Kilauea 2018.

Author(s):  
Christopher R. J. Kilburn ◽  
Rosaly M. C. Lopes
Keyword(s):  

1988 ◽  
Vol 93 (B12) ◽  
pp. 14759-14772 ◽  
Author(s):  
Christopher R. J. Kilburn ◽  
Rosaly M. C. Lopes
Keyword(s):  

1987 ◽  
Vol 49 (3) ◽  
pp. 527-540 ◽  
Author(s):  
J. E. Guest ◽  
C. R. J. Kilburn ◽  
H. Pinkerton ◽  
A. M. Duncan
Keyword(s):  

Geology ◽  
2021 ◽  
Author(s):  
Joana R.C. Voigt ◽  
Christopher W. Hamilton ◽  
Gregor Steinbrügge ◽  
Ármann Höskuldsson ◽  
Ingibjörg Jónsdottir ◽  
...  

Determining the parameters that control fissure-fed lava morphologies is critical for reconstructing the complex emplacement histories of eruptions on Earth and other planetary bodies. We used a geomorphological map of the 2014–2015 Holuhraun lava flow field, in combination with new constraints on lava emplacement chronology and two independently derived time-averaged discharge rate (TADR) data sets, to analyze correlations between lava morphology and effusion rate. Results show that lava morphologies are dominantly controlled by effusion rate at the vent during the early phases of the eruption and by lava transport processes as the system evolves. Initially, TADR and its variance, which reflect pulsation in the lava supply rate from the vent, directly affect lava emplacement styles. However, as the eruption progresses, the lava transport system exerts a stronger control with channels and ponds that can either dampen variation in local effusion rate or create surges during sudden drainage events. The Holuhraun eruption predominantly produced rubbly lava in its earlier eruption phases and transitioned into the production of spiny lava toward the end of the eruption. However, a drop of TADR during the first phase of the eruption correlates with a decrease in rubbly lava formation and an increase in spiny lava production. This suggests that a change in effusion rate caused the observed transition in lava type. Our findings show that rubbly lava is formed under relatively high local effusion rates with pulsating supply conditions, whereas spiny lava is formed under lower local effusion rates and steadier supply.


2019 ◽  
Vol 11 (16) ◽  
pp. 1916 ◽  
Author(s):  
Claudia Corradino ◽  
Gaetana Ganci ◽  
Annalisa Cappello ◽  
Giuseppe Bilotta ◽  
Alexis Hérault ◽  
...  

Accurate mapping of recent lava flows can provide significant insight into the development of flow fields that may aid in predicting future flow behavior. The task is challenging, due to both intrinsic properties of the phenomenon (e.g., lava flow resurfacing processes) and technical issues (e.g., the difficulty to survey a spatially extended lava flow with either aerial or ground instruments while avoiding hazardous locations). The huge amount of moderate to high resolution multispectral satellite data currently provides new opportunities for monitoring of extreme thermal events, such as eruptive phenomena. While retrieving boundaries of an active lava flow is relatively straightforward, problems arise when discriminating a recently cooled lava flow from older lava flow fields. Here, we present a new supervised classifier based on machine learning techniques to discriminate recent lava imaged in the MultiSpectral Imager (MSI) onboard Sentinel-2 satellite. Automated classification evaluates each pixel in a scene and then groups the pixels with similar values (e.g., digital number, reflectance, radiance) into a specified number of classes. Bands at the spatial resolution of 10 m (bands 2, 3, 4, 8) are used as input to the classifier. The training phase is performed on a small number of pixels manually labeled as covered by fresh lava, while the testing characterizes the entire lava flow field. Compared with ground-based measurements and actual lava flows of Mount Etna emplaced in 2017 and 2018, our automatic procedure provides excellent results in terms of accuracy, precision, and sensitivity.


1997 ◽  
Vol 134 (2) ◽  
pp. 151-162 ◽  
Author(s):  
GERARDO CARRASCO-NÚÑEZ

Recent (Quaternary) lava fields, such as those of Citlaltépetl (Pico de Orizaba) volcano in Mexico, are excellent places to obtain precise measurements of flow-field dimensions that can be used to estimate volume, eruption duration and effusion rates. The relationship between these parameters and the influence of some other interrelated features such as lava composition, superficial structures and lava type are important tools that can help to infer conditions when the lavas were active and thus improve understanding of how flow fields grow. The Holocene lavas of Citlaltépetl volcano are homogeneous in composition (dacites) and are generally blocky with well-developed levees. The eruption duration obtained for the Citlaltépetl lavas by a method proposed by C. Kilburn and R. Lopes presents a good correlation with the different lava types morphologically classified here. Results from that method compare favourably with the inferred effusion rates estimated by an empirical cooling method (Graetz). The lavas show different behaviour, mainly controlled by fluctuations in the effusion rate that promote changes from single- to multiple-flow style. The maximum distance achieved by a flow is directly proportional to the effusion rate in Citlaltépetl lavas, but it is always lower for multiple flows, independent of the volume of erupted lava. Observations of Citlaltépetl lavas can be used to understand how lava flow growth occurs on other volcanoes.


2012 ◽  
Vol 235-236 ◽  
pp. 11-22 ◽  
Author(s):  
Simone Tarquini ◽  
Massimiliano Favalli ◽  
Francesco Mazzarini ◽  
Ilaria Isola ◽  
Alessandro Fornaciai

Sign in / Sign up

Export Citation Format

Share Document