scholarly journals An Experimental Study on External Ventilation to the Heating Performance of Household Air Source Heat Pump

2021 ◽  
Vol 9 ◽  
Author(s):  
Hang Zou ◽  
Zhanqiang Liu ◽  
Enshen Long
Keyword(s):  
Heat Pump ◽  
Great Influence ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Pump System ◽  
Heat Pump System ◽  
Heating Performance ◽  
Air Source Heat Pump ◽  
Ventilation Condition ◽  
Ventilation Conditions

The external ventilation conditions have a great influence on the heating performance of the air source heat pump (ASHP) systems. The outdoor units of residential household air source heat pumps are often installed in narrow spaces such as balconies. The ventilation conditions of the outdoor unit will influent the heating performance of the air source heat pump. It is necessary to study the effect of the outdoor unit ventilation conditions on the heating performance of residential household heat pumps. This paper experimentally studied the heating performances of an air source heat pump system with the outdoor unit mounted in a balcony in different external ventilation conditions. The results indicate that the ventilation conditions for the outdoor units have a significant effect on the heating performance of the system. When the inlet of the outdoor unit was close to the sliding door and completely blocked, the ventilation environment was the worst and the coefficient of performance (COP) was the lowest. In addition, the unfavorable ventilation environment could result in a reduction of the COP by 26.2%. When the inlet of the outdoor unit was partially blocked, the heating performance could be improved and the COP was also slightly improved. The great heating performance was obtained under the cross-ventilation condition. This paper can guide the design of the installation position of the household air source heat pump outdoor units in actual engineering.

Heating Performance Investigations on Two Applications of a Solar Assisted Air Source Heat Pump System

2011 ◽  
Vol 374-377 ◽  
pp. 284-287 ◽  
Author(s):  
Yu Wang ◽  
Yu Wen You ◽  
Zhi Gang Zhang
Keyword(s):  
Heat Pump ◽  
Solar Collector ◽  
Coefficient Of Performance ◽  
Experimental Investigations ◽  
Pump System ◽  
Heat Pump System ◽  
Heating Performance ◽  
Air Source Heat Pump

A solar assisted air source heat pump (SAASHP) system is proposed to improve heating performance of air source heat pump (ASHP).The proposed system has been applied in two buildings, a series of experimental investigations were conducted in the both applications, it indicated that the SAASHP system gets better heating performance than ASHP system, the coefficient of performance (COP) gets 10% and 65% increase respectively in two applications. It is also concluded that the ratio of solar collector area to construction area significantly affects the improvement of heating performance in SAASHP system. This work may promote further research and more applications of SAASHP system.

scholarly journals Design and Performance Evaluation of a Heat Pump System Utilizing a Permanent Dewatering System

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2273
Author(s):  
Seung-Hoon Park ◽  
Yong-Sung Jang ◽  
Eui-Jong Kim
Keyword(s):  
Energy Source ◽  
Heat Exchanger ◽  
Heat Pump ◽  
Large Scale ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Pump System ◽  
Heat Pump System ◽  
Air Source Heat Pump ◽  
And Performance

The earth provides a vast resource of groundwater from aquifers a few meters beneath the surface. Thus, buildings that use underground space must be equipped with dewatering wells to drain the permeated groundwater to the sewage pipelines to ensure the structural stability of the building. Although the inflowing groundwater temperatures and flow rates are stable enough for groundwater to be used as an energy source, 79% of the permeated groundwater is discarded through the sewers, generating significant sewerage expenses. This study introduced a novel heat exchanger module to utilize the permeated groundwater as an unused energy source using heat pumps, and the performance of the system was evaluated by TRNSYS simulations. First, the sizing of the unit heat exchanger module was proposed according to the mean inflow rate of the permeated groundwater. Second, the heat pump system was configured using multiple modules in the source-side loop. Finally, the performance of the proposed heat pump system was compared with that of a conventional air source heat pump using realistic load and temperature profiles. This preliminary study demonstrated interesting performance results, with a coefficient of performance for heating that was higher than that of a conventional heat pump system by 0.79. The results show the potential utilization of the systems for a construction project requiring large-scale underground spaces, where abundant groundwater is available.

scholarly journals Frosting Phenomenon and Frost-Free Technology of Outdoor Air Heat Exchanger for an Air-Source Heat Pump System in China: An Analysis and Review

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2642 ◽  
Author(s):  
Yi Zhang ◽  
Guanmin Zhang ◽  
Aiqun Zhang ◽  
Yinhan Jin ◽  
Ruirui Ru ◽  
...  
Keyword(s):  
Heat Exchanger ◽  
Heat Pump ◽  
Operating Cost ◽  
Heating System ◽  
Coefficient Of Performance ◽  
Outdoor Air ◽  
Pump System ◽  
Heat Pump System ◽  
Reduce Operating Cost ◽  
Air Source Heat Pump

Frost layer on the outdoor air heat exchanger surface in an air-source heat pump (ASHP) can decrease the system coefficient of performance (COP). Although the common defrosting and anti-frosting methods can improve the COP, the periodic defrosting not only reduces the system energy efficiency but also deteriorates the indoor environment. To solve these problems, it is necessary to clearly understand the frosting phenomenon and to achieve the system frost-free operation. This paper focused firstly on the analyses of frosting pathways and frosting maps. Followed by summarizing the characteristics of frost-free technologies. And then the performances of two types of frost-free ASHP (FFASHP) systems were reviewed, and the exergy and economic analysis of a FFASHP heating system were carried out. Finally, the existing problems related to the FFASHP technologies were proposed. Results show that the existing frosting maps need to be further improved. The FFASHP systems can not only achieve continuous frost-free operation but reduce operating cost. And the total COP of the FFASHP heating system is approximately 30–64% higher than that of the conventional ASHP system under the same frosting conditions. However, the investment cost of the FFASHP system increases, and its reliability also needs further field test in a wider frosting environment. In the future, combined with a new frosting map, the control strategy for the FFASHP system should be optimized.

Sustainability Study on GCHP Heating System in Severe Cold Area of China

2013 ◽  
Vol 411-414 ◽  
pp. 3084-3087
Author(s):  
Shu Zhang ◽  
Mao Yu Zheng
Keyword(s):  
Heat Pump ◽  
Thermal Load ◽  
Heating System ◽  
Coefficient Of Performance ◽  
Heating Effect ◽  
Pump System ◽  
Heat Pump System ◽  
Heating Performance ◽  
Long Time ◽  
Cold Area

In this paper, the mathematical models of a GCHP system and a Ground-couple heat pump system with air-soil thermal storage (GCHPASTS) were developed, and the 20-year performances of the two systems were simulated in severe cold area of china, respectively. The results show that the soil temperature declines gradually during the operation of a GCHP system, which leads to the decrease of the coefficient of performance (COP) and the heating effect of the heat pump year after year. On the contrary, the balance of ground thermal load can be realized during the operation of a GCHPASTS system, and the heating performance of heat pump is stable and efficient for long time. So, it can be proved that a GCHP system cant be used for heating alone, while a GCHPASTS system is feasibility.

Photovoltaic thermal collector assisted heat pumps using environment-friendly working fluids

2020 ◽  
pp. 095440892094736
Author(s):  
AA Ammar ◽  
K Sopian ◽  
M Mohanraj
Keyword(s):  
Heat Pump ◽  
Energy Performance ◽  
Heat Pumps ◽  
Payback Period ◽  
Photovoltaic System ◽  
Coefficient Of Performance ◽  
Photovoltaic Module ◽  
Pump System ◽  
Heat Pump System ◽  
Thermal Evaporator

In this research, a photovoltaic-thermal collector assisted heat pump has been developed and tested its performance under the tropical climatic conditions of Malaysia. The refrigerants such as, R134a and R1234yf were selected based on its thermodynamic and thermo-physical properties. The temperature of the photovoltaic module was theoretically predicted under the influence of tube diameter, tube spacing and refrigerant mass flow rate. Further, the energy performance of the photovoltaic-thermal evaporator and the heat pump system are investigated experimentally. Finally, the economical feasibility of the photovoltaic-thermal collector evaporator was assessed for the period of 20 years. The results showed that, the tube spacing and diameter of the copper tubes used in the photovoltaic-thermal evaporator/collector using R134a and R1234yf were optimized to 80 mm and 12.7 mm, respectively. It was observed that, during the clear sunny day, the average photovoltaic module temperature was reduced to 30.9 °C under the influence of panel cooling using refrigerant. The output of the panel was enhanced by 21%–44% with increase in solar radiation from 400 W/m2 to 1000 W/m2. The coefficient of performance of the heat pump was varied from 4.8 to 6.84 with an average coefficient of performance of 5.8 during clear sunny days. The life cycle economic analysis indicated that, the photovoltaic-thermal collector evaporator assisted heat pump has a payback period of 3 years, whereas the reference photovoltaic system has a payback period of 8 years.

SIMULATION ON OPERATION CHARACTERISTICS OF HYBRID GROUND-AIR SOURCE HEAT PUMP SYSTEM WITH NATURAL COLD STORAGE

2014 ◽  
Vol 22 (02) ◽  
pp. 1440004 ◽  
Author(s):  
Z. W. HAN ◽  
X. MENG ◽  
M. LIN ◽  
Y. H. ZHANG ◽  
J. YANG ◽  
...  
Keyword(s):  
Heat Pump ◽  
Cold Storage ◽  
Coefficient Of Performance ◽  
Pump System ◽  
Heat Pump System ◽  
Air Source Heat Pump ◽  
Operational Life ◽  
Vapor Compression Refrigeration Cycle ◽  
Set Up ◽  
Operation Characteristics

To solve the problem of the coefficient of performance (COP) decrease and power crunch in cooling dominated South China associated with the long-term usage of ground-source heat pump system (GSHPS), a hybrid ground-air source heat pump system (HGASHPS) with natural cold storage is presented in this paper. The system consists of a GSHP system and compound air-cooled chillers (CACC), which can be operated according to the vapor compression refrigeration cycle or separate type heat pipe natural cycle. The mathematical models of each part of the system were set up and the conversion conditions between operation modes for the system were determined. The transient simulation for HGASHPS with natural cold storage in Nanjing was carried out. The operation characteristics of the systems in operational life were comparatively analyzed. The simulation results indicated that the HGASHPS with natural cold storage could retain the thermal balance of soil temperature field in one year cycle and increase the COP and reliability of the system.

scholarly journals Performance assessment between a ground coupled and air source heat pump used for domestic hot water preparation

2019 ◽  
Vol 111 ◽  
pp. 06075
Author(s):  
Calin Sebarchievici
Keyword(s):  
Heat Pump ◽  
Simulation Models ◽  
Electrical Energy ◽  
Heat Pumps ◽  
Hot Water ◽  
Pump System ◽  
Heat Pump System ◽  
Domestic Hot Water ◽  
Air Source Heat Pump ◽  
Systems Simulation

A ground-coupled heat pump system (GCHP) and an air source heat pump (ASHP) driven by photovoltaic panels are used to provide domestic hot preparation for a NZEB house. The experimental measurements are used to test both the heat pump models in the same conditions of water temperature and volume of domestic hot water. A comparative analysis of the two heat pumps for domestic hot water preparation is performed. In addition, using the software TRNSYS (Transient Systems Simulation), two numerical simulation models of thermal and electrical energy consumption in DHW mode are developed. Finally, the simulations obtained using TRNSYS software are analysed and compared to the experimental data.

scholarly journals Implementation of a geothermal heat pump system in a solar passive house

2019 ◽  
Vol 85 ◽  
pp. 07014
Author(s):  
Gheorghe Ilisei ◽  
Tiberiu Catalina ◽  
Marian Alexandru ◽  
Robert Gavriliuc
Keyword(s):  
Heat Pump ◽  
Electricity Consumption ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Passive House ◽  
Geothermal Heat ◽  
Pump System ◽  
Heat Pump System ◽  
Major Index ◽  
Passive Houses

Underground energy sources are becoming increasingly popular and now geothermal heat pumps are frequently used to heat/cool different types of buildings, including for solar passive houses. This article aims at giving a contribution in the development of the thermal modelling of borehole heat storage systems, investigating the possibility of a GSHP (ground source heat pump) implementation with vertical boreholes in a solar passive house. A case study analysing a residential solar passive house is presented as a suitable modelling tool for the estimation of the thermal behaviour of GSHP systems by combining the outcome from different modelling programs. The software DesignBuilder, Earth Energy Designer and a sizing method for borehole’s length are used for producing the numerical results. The results highlight that the length of the borehole, a major index in estimating the system’s cost, is directly influenced by fundamental variables like thermal conductivity of grout or soil. Additionally, correlations between these parameters and the coefficient of performance of GSHP were made. Furthermore, the length of borehole is very important as it is responsible for almost half of the total installation cost and triggered a difference in electricity consumption of the GSHP up to 14%.

Sign in / Sign up

Export Citation Format

Share Document