scholarly journals Five-Fingered Passive Force Feedback Glove Using a Variable Ratio Lever Mechanism

Actuators ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 96
Author(s):  
Yuan Guo ◽  
Xiuping Yang ◽  
Haitong Wang ◽  
Yuru Zhang ◽  
Weiliang Xu ◽  
...  
Keyword(s):  
Response Time ◽  
Force Feedback ◽  
Variable Stiffness ◽  
Torque Control ◽  
Control Mode ◽  
Variable Ratio ◽  
Passive Force ◽  
Virtual Objects ◽  
Lever Mechanism ◽  
Ratio Lever

Force feedback gloves allow users to touch and manipulate virtual objects intuitively. Compared with gloves providing active feedback force, gloves with passive feedback force are promising in terms of safety and low weight, but simulating the variable stiffness of virtual objects is more challenging. Addressing this difficulty, we propose a five-fingered glove with passive force feedback employing a variable ratio lever mechanism. The stiffness of the proposed glove is tuned by changing the structural stiffness of this mechanism rather than by applying torque control at each joint of the finger. The switch between free and constrained space is realized in real time by locking/unlocking the revolute joints of the glove using a servo motor. Furthermore, a predictive control mode is proposed to reduce the response time of the control system, and the actual response time is less than the limit of the delay (45 ms) that humans can perceive between visual and haptic stimuli. Experimental results show that the linear stiffness at the fingertip ranges from 0.89 to 619.89 N/m, and the maximum backdrive force of the proposed glove is less than 0.147 N.

A New Actuator With Adjustable Stiffness Based on a Variable Ratio Lever Mechanism

2014 ◽  
Vol 19 (1) ◽  
pp. 55-63 ◽  
Author(s):  
Amir Jafari ◽  
Nikos G. Tsagarakis ◽  
Irene Sardellitti ◽  
Darwin G. Caldwell
Keyword(s):  
Variable Ratio ◽  
Lever Mechanism ◽  
Ratio Lever

Torque Control of Electrorheological Fluidic Resistive Actuators for Haptic Vehicular Instrument Controls

2005 ◽  
Vol 128 (2) ◽  
pp. 216-226 ◽  
Author(s):  
M. A. Vitrani ◽  
J. Nikitczuk ◽  
G. Morel ◽  
C. Mavroidis ◽  
B. Weinberg
Keyword(s):  
Electric Fields ◽  
Closed Loop ◽  
Force Feedback ◽  
Haptic Feedback ◽  
Control Device ◽  
Torque Control ◽  
Feedback Mechanisms ◽  
Feedforward Loop ◽  
Integral Controller ◽  
Proportional Integral Controller

Force-feedback mechanisms have been designed to simplify and enhance the human-vehicle interface. The increase in secondary controls within vehicle cockpits has created a desire for a simpler, more efficient human-vehicle interface. By consolidating various controls into a single, haptic feedback control device, information can be transmitted to the operator, without requiring the driver’s visual attention. In this paper, the experimental closed loop torque control of electro-rheological fluids (ERF) based resistive actuators for haptic applications is performed. ERFs are liquids that respond mechanically to electric fields by changing their properties, such as viscosity and shear stress electroactively. Using the electrically controlled rheological properties of ERFs, we developed resistive-actuators for haptic devices that can resist human operator forces in a controlled and tunable fashion. In this study, the ERF resistive-actuator analytical model is derived and experimentally verified and accurate closed loop torque control is experimentally achieved using a non-linear proportional integral controller with a feedforward loop.

scholarly journals Design of Supervisory Control for Speed Control of Wind Turbine using Torque-Control Method Based on Buck Converter

2020 ◽  
Vol 190 ◽  
pp. 00019
Author(s):  
Katherin Indriawati ◽  
Choirul Mufit ◽  
Andi Rahmadiansah
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Supervisory Control ◽  
Control Method ◽  
Speed Control ◽  
Buck Converter ◽  
Torque Control ◽  
Control Mode ◽  
Rotor Speed ◽  
Integral Control

The variation of wind speed causes the electric power generated by the turbine also varies. To obtain maximum power, the rotor speed of wind turbines must be optimally rated. The rotor speed can be controlled by manipulating the torque from the generator; this method is called Torque Control. In that case, a DC-DC converter is needed as the control actuator. In this study, a buck converter-based supervisory control design was performed on the Horizontal-axis wind turbines (HAWT). Supervisory control is composed of two control loops arranged in cascade, and there is a formula algorithm as the supervisory level. The primary loop uses proportional control mode with a proportional gain of 0.3, whereas in the secondary loop using proportional-integral control mode with a proportional gain of 5.2 and an integral gain of 0.1. The Supervisory control has been implemented successfully and resulted in an average increase in turbine power of 4.1 % at 5 m s–1 and 10.58 % at 6 m s–1 and 11.65 % at 7 m s–1, compared to wind turbine systems without speed control.

A Variable Stiffness Actuator Based on Second-order Lever Mechanism and Its Manipulator Integration

2021 ◽  
Author(s):  
Zhangxing Liu ◽  
Hongzhe Jin ◽  
Hui Zhang ◽  
Yubin Liu ◽  
Yilin Long ◽  
...  
Keyword(s):  
Variable Stiffness ◽  
Second Order ◽  
Lever Mechanism ◽  
Variable Stiffness Actuator

Note: Hybrid active/passive force feedback actuator using hydrostatic transmission

2017 ◽  
Vol 88 (12) ◽  
pp. 126103
Author(s):  
Yea-Seok Park ◽  
Juwon Lee ◽  
Kyung-Soo Kim ◽  
Soohyun Kim
Keyword(s):  
Force Feedback ◽  
Passive Force ◽  
Hydrostatic Transmission

Integrating a Grasp Exoskeleton Into a String-Based Interface for Human-Scale Interactions

2008 ◽  
Vol 8 (4) ◽  
Author(s):  
Rasul Fesharakifard ◽  
Maryam Khalili ◽  
Laure Leroy ◽  
Alexis Paljic ◽  
Philippe Fuchs
Keyword(s):  
Virtual Environments ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Control Method ◽  
Hybrid Control ◽  
Force Sensor ◽  
Virtual Objects ◽  
Rotary Encoder ◽  
Human Scale ◽  
Novel Design

A grasp exoskeleton actuated by a string-based platform is proposed to provide the force feedback for a user’s hand in human-scale virtual environments. The user of this interface accedes to seven active degrees of freedom in interaction with virtual objects, which comprises three degrees of translation, three degrees of rotation, and one degree of grasping. The exoskeleton has a light and ergonomic structure and provides the grasp gesture for five fingers. The actuation of the exoskeleton is performed by eight strings that are the parallel arms of the platform. Each string is connected to a block of motor, rotary encoder, and force sensor with a novel design to create the necessary force and precision for the interface. A hybrid control method based on the string’s tension measured by the force sensor is developed to resolve the ordinary problems of string-based interface. The blocks could be moved on a cubic frame around the virtual environment. Finally the results of preliminary experimentation of interface are presented to show its practical characteristics. Also the interface is mounted on an automotive model to demonstrate its industrial adaptability.

Force Feedback Glove for Manipulation of Virtual Objects

1993 ◽  
Vol 5 (1) ◽  
pp. 79-84 ◽  
Author(s):  
Haruhisa Kawasaki ◽  
◽  
Takahiro Hayashi
Keyword(s):  
Feedback Control ◽  
Force Feedback ◽  
Joint Angle ◽  
Force Sensor ◽  
Servo Motor ◽  
Force Transmission ◽  
Transmission Characteristics ◽  
Angle Sensor ◽  
Virtual Objects ◽  
The Difference

This paper presents a new force feedback glove for manipulation of virtual objects. The glove is comprised of wire, link, servo motor, force sensor, and joint angle sensor of fingers. These devices are mounted to the back of glove. The object grasping sense is generated by the force feedback control of the servo motor. We show the force transmission characteristics of the glove and the experimental results of recognition of the difference in rigidity of object.

Sign in / Sign up

Export Citation Format

Share Document