scholarly journals Nonlinear Dynamic Response of a Concrete Rectangular Liquid Storage Tank on Rigid Soil Subjected to Three-Directional Ground Motion

2021 ◽  
Vol 11 (10) ◽  
pp. 4688
Author(s):  
Chae-Been Lee ◽  
Jin-Ho Lee

The dynamic responses of a concrete rectangular liquid storage tank on the surface of rigid soil subjected to three-directional earthquake ground motion are investigated with material nonlinearity taken into consideration. Material nonlinearity in concrete is considered using the concrete damage plasticity model. The hydrodynamic pressure due to earthquake ground motion is considered using a finite-element solution of the governing equation for an inviscid and incompressible ideal fluid with the fluid–structure interaction taken into consideration. It was observed from the dynamic analyses that the effects of material nonlinearity and directionality significantly affect the earthquake responses of the considered system. The relative displacement of the structure increased significantly by the nonlinearity of the material. Inclined cracks due to the increased displacement were observed on the long-sided walls. The hydrodynamic pressure can be reduced significantly by the material nonlinearity and is influenced by the directionality of an earthquake’s ground motion. The base shear and overturning moment due to the hydrodynamic pressure and the resulting impulsive mass and corresponding height for a simplified mass-spring analogy are also affected. Because the directionality was observed to have a significant influence on the peak value of the sloshing height, it must be estimated with the directionality considered.

2019 ◽  
Vol 9 (11) ◽  
pp. 2376 ◽  
Author(s):  
Wei Jing ◽  
Huan Feng ◽  
Xuansheng Cheng

Based on potential flow theory and arbitrary Lagrangian–Eulerian method, shell–liquid and shell–wind interactions are solved respectively. Considering the nonlinearity of tank material and liquid sloshing, a refined 3-D wind–shell–liquid interaction calculation model for liquid storage tanks is established. A comparative study of dynamic responses of liquid storage tanks under wind, earthquake, and wind and earthquake is carried out, and the influences of wind speed and wind interference effect on dynamic responses of liquid storage tank are discussed. The results show that when the wind is strong, the dynamic responses of the liquid storage tank under wind load alone are likely to be larger than that under earthquake, and the dynamic responses under wind–earthquake interaction are obviously larger than that under wind and earthquake alone. The maximum responses of the tank wall under wind and earthquake are located in the unfilled area at the upper part of the tank and the filled area at the lower part of the tank respectively, while the location of maximum responses of the tank wall under wind–earthquake interaction is related to the relative magnitude of the wind and earthquake. Wind speed has a great influence on the responses of liquid storage tanks, when the wind speed increases to a certain extent, the storage tank is prone to damage. Wind interference effect has a significant effect on liquid storage tanks and wind fields. For liquid storage tanks in special environments, wind and earthquake effects should be considered reasonably, and wind interference effects cannot be ignored.


2020 ◽  
Vol 25 (1) ◽  
pp. 27-40
Author(s):  
Aruna Rawat ◽  
Vasant Matsagar ◽  
A. K. Nagpal

A seismic analysis of ground-supported, three-dimensional (3-D) rigid-base steel cylindrical liquid storage tank is investigated, using a coupled acoustic-structural finite element (FE) method for fluid-structure interaction (FSI). In this method, the contained liquid in the tank is modelled using acoustic elements and the cylindrical tank is modelled using shell elements. The impulsive and convective terms are estimated separately by using the appropriate boundary conditions on the free surface of the liquid. The convergence and validation studies of the proposed FE model are conducted by comparing the results reported in the literature. The parametric studies are performed for rigid and flexible tanks for the varying slenderness of the open roof tanks. The sloshing displacement and base shear time history responses are evaluated for the 3-D tanks subjected to harmonic unidirectional ground motions. Further, the results are compared with the commonly used two and three lumped-mass models of the tank. Moreover, the seismic response quantities of the tank subjected simultaneously to the bi-directional horizontal components of earthquake ground motion are also investigated using the 3-D FE model, and the response quantities are compared with the lumped-mass models. The results obtained from the 3-D FE model and lumped-mass model are in close agreement. The average percentage difference in the 3-D FE and lumped-mass models for maximum sloshing displacement prediction is 15 percent to 20 percent and that for the base shear is about 4 to 10 percent, in the case of the uni-directional harmonic ground motions. It is concluded that the sloshing displacement is not affected by the tank flexibility, but the impulsive hydrodynamic pressure and the impulsive component of the base shear increases with the tank flexibility.


Author(s):  
Hao Luo ◽  
Ruifu Zhang ◽  
Dagen Weng

In this study, a hybrid control method is proposed, in which both isolation bearings and an inertial mass damper (IMD) are used, to reduce the seismic response of a liquid storage tank. First, simplified models of the tank and IMD are illustrated. Next, to evaluate the effectiveness of the proposed method, three tanks, including a fixed tank, an isolated tank and an isolated tank with an IMD, are analyzed and compared. Last, parametric studies are conducted to investigate the effects of equivalent inertial mass and viscous damping of the IMD. It is observed that, compared with the fixed tank, the base shear of the isolated one is largely reduced, whereas the wave height is consequently amplified; for the isolated tank with an IMD, not only is the base shear more obviously reduced, but also the wave height is effectively controlled. What’s more, the base displacement of the isolated tank with an IMD is much lower than that of the isolated one. Therefore, the proposed method can be considered as an effective method to control the seismic response of the liquid storage tanks.


2015 ◽  
Vol 29 (3) ◽  
pp. 1289-1295 ◽  
Author(s):  
Hyo Seok Son ◽  
Chul Kim ◽  
Douglas Reindl ◽  
Hiki Hong

Sign in / Sign up

Export Citation Format

Share Document