scholarly journals Multiple Signal Classification-Based Impact Localization in Composite Structures Using Optimized Ensemble Empirical Mode Decomposition

2018 ◽  
Vol 8 (9) ◽  
pp. 1447 ◽  
Author(s):  
Yongteng Zhong ◽  
Jiawei Xiang ◽  
Xiaoyu Chen ◽  
Yongying Jiang ◽  
Jihong Pang
Keyword(s):  
Composite Structures ◽  
Sensor Array ◽  
Ensemble Empirical Mode Decomposition ◽  
Signal Classification ◽  
Music Algorithm ◽  
Multiple Signal Classification ◽  
Multiple Signal ◽  
Mode Decomposition ◽  
The Impact ◽  
Impact Localization

Multiple signal classification (MUSIC) algorithm-based structural health monitoring technology is a promising method because of its directional scanning ability and easy arrangement of the sensor array. However, in previous MUSIC-based impact location methods, the narrowband signals at a particular central frequency had to be extracted from the wideband Lamb waves induced by each impact using a wavelet transform. Additionally, the specific center frequency had to be obtained after carefully analyzing the impact signal, which is time consuming. Aiming at solving this problem, this paper presents an improved approach that combines the optimized ensemble empirical mode decomposition (EEMD) and two-dimensional multiple signal classification (2D-MUSIC) algorithm for real-time impact localization on composite structures. Firstly, the impact signal at an unknown position is obtained using a unified linear sensor array. Secondly, the fast Hilbert Huang transform (HHT) with an optimized EEMD algorithm is introduced to extract intrinsic mode functions (IMFs) from impact signals. Then, all IMFs in the whole frequency domain are directly used as the input vector of the 2D-MUSIC model separately to locate the impact source. Experimental data collected from a cross-ply glass fiber reinforced composite plate are used to validate the proposed approach. The results show that the use of optimized EEMD and 2D-MUSIC is suitable for real-time impact localization of composite structures.

A Dynamic Sub-Array Divided Technique for Spherical Conformal Array Antenna Using K-Means Algorithm

2014 ◽  
Vol 926-930 ◽  
pp. 2884-2888 ◽  
Author(s):  
Jin Yan Tang ◽  
Yue Lei Xie ◽  
Cheng Cheng Peng
Keyword(s):  
Direction Of Arrival ◽  
Array Antenna ◽  
Signal Classification ◽  
Music Algorithm ◽  
Multiple Signal Classification ◽  
Conformal Array ◽  
Multiple Signal

In this paper, a sub-array divided technique using K-means algorithm for spherical conformal array is proposed. All elements of spherical conformal array can be divided into a few sub-arrays by employing the K-means algorithm, and the standard multiple signal classification (MUSIC) algorithm is applied to estimate signals Direction-of-arrival (DOA) on these sub-arrays. Simulations of estimating DOA on a rotational spherical conformal array have been made and the results show that the resolution of DOA is improved by our method compare to existing methods.

Sound Source Localization Based on Microphone Uniform Linear Array

2013 ◽  
Vol 748 ◽  
pp. 634-639 ◽  
Author(s):  
Jian Rong Wang ◽  
Ju Zhang ◽  
Song Gun Hyon ◽  
Jian Guo Wei
Keyword(s):  
Source Localization ◽  
Sound Source ◽  
Linear Array ◽  
Weighted Average ◽  
Classification Algorithm ◽  
Signal Classification ◽  
Uniform Linear Array ◽  
Multiple Signal Classification ◽  
Multiple Signal ◽  
The Impact

In order to locate the sound source based on the microphone uniform linear array and reduce the impact of noise and reflection, improved multiple signal classification algorithm and a kind of weighted average filters be used in this paper. According to the microphone array speech processing characteristics, we improved the traditional multiple signal classification algorithm and designed a kind of weighted average filters. Then, we made the computer simulation experiments. The experimental results show that the location of the sound source is the peak with the highest power in the spatial spectrum. Besides, the frequency domain diagram is more smoothly and the power of the noise and reflection is effectively reduced except sound source through the weighted average processing. Therefore, improved multiple signal classification algorithm can achieve sound source localization based on the microphone uniform linear array. And the impact of the noise and reflection is effectively reduced by processing of the weighted average filters.

MULTIPLE SIGNAL CLASSIFICATION FOR GRAVITATIONAL WAVE BURST SEARCH

2013 ◽  
Vol 23 ◽  
pp. 74-81
Author(s):  
JUNWEI CAO ◽  
ZHENGQI HE
Keyword(s):  
Gravitational Wave ◽  
Doa Estimation ◽  
Signal Classification ◽  
Music Algorithm ◽  
Multiple Signal Classification ◽  
Wave Characteristics ◽  
Multiple Signal ◽  
Promising Tool ◽  
Arbitrary Position ◽  
Noise Covariance

This work is mainly focused on the application of the multiple signal classification (MUSIC) algorithm for gravitational wave burst search. This algorithm extracts important gravitational wave characteristics from signals coming from detectors with arbitrary position, orientation and noise covariance. In this paper, the MUSIC algorithm is described in detail along with the necessary adjustments required for gravitational wave burst search. The algorithm's performance is measured using simulated signals and noise. MUSIC is compared with the Q-transform for signal triggering and with Bayesian analysis for direction of arrival (DOA) estimation, using the Ω-pipeline. Experimental results show that MUSIC has a lower resolution but is faster. MUSIC is a promising tool for real-time gravitational wave search for multi-messenger astronomy.

Impact source localization in plate utilizing multiple signal classification

2012 ◽  
Vol 227 (4) ◽  
pp. 703-713 ◽  
Author(s):  
HongJun Yang ◽  
Young Jun Lee ◽  
Sang Kwon Lee
Keyword(s):  
Time Delay ◽  
Group Velocity ◽  
Source Localization ◽  
Direction Of Arrival ◽  
Signal Classification ◽  
Classification Method ◽  
Multiple Signal Classification ◽  
Multiple Signal ◽  
The Impact ◽  
Time Delay Of Arrival

This article proposed a multiple signal classification method based on array signal processing for impact source localization in a plate. For source localization, the direction of arrival of the wave caused by an impact on a plate and the distance between the impact position and sensor should be estimated. The direction of arrival can be estimated accurately using the multiple signal classification method; the distance can be obtained using the time delay of arrival and the group velocity of the Lamb wave in a plate. The time delay of arrival is experimentally estimated using the continuous wavelet transform for the wave. The group velocity is theoretically obtained based on the elastodynamic theory.

scholarly journals Computationally Efficient Direction-of-Arrival Estimation Algorithms for a Cubic Coprime Array

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 136
Author(s):  
Pan Gong ◽  
Xixin Chen
Keyword(s):  
Covariance Matrix ◽  
Lower Boundary ◽  
Direction Of Arrival ◽  
Doa Estimation ◽  
Mimo Radar ◽  
Signal Classification ◽  
Computationally Efficient ◽  
Music Algorithm ◽  
Multiple Signal Classification ◽  
Multiple Signal

In this paper, we investigate the problem of direction-of-arrival (DOA) estimation for massive multi-input multi-output (MIMO) radar, and propose a total array-based multiple signals classification (TA-MUSIC) algorithm for two-dimensional direction-of-arrival (DOA) estimation with a coprime cubic array (CCA). Unlike the conventional multiple signal classification (MUSIC) algorithm, the TA-MUSIC algorithm employs not only the auto-covariance matrix but also the mutual covariance matrix by stacking the received signals of two sub cubic arrays so that full degrees of freedom (DOFs) can be utilized. We verified that the phase ambiguity problem can be eliminated by employing the coprime property. Moreover, to achieve lower complexity, we explored the estimation of signal parameters via the rotational invariance technique (ESPRIT)-based multiple signal classification (E-MUSIC) algorithm, which uses a successive scheme to be computationally efficient. The Cramer–Rao bound (CRB) was taken as a theoretical benchmark for the lower boundary of the unbiased estimate. Finally, numerical simulations were conducted in order to demonstrate the effectiveness and superiority of the proposed algorithms.

Damage detection and characterization of a scaled model steel truss bridge using combined complete ensemble empirical mode decomposition with adaptive noise and multiple signal classification approach

2021 ◽  
pp. 147592172110459
Author(s):  
Asma A Mousavi ◽  
Chunwei Zhang ◽  
Sami F Masri ◽  
Gholamreza Gholipour
Keyword(s):  
Damage Detection ◽  
Ensemble Empirical Mode Decomposition ◽  
Signal Classification ◽  
Multiple Signal Classification ◽  
Steel Truss Bridge ◽  
Mode Decomposition ◽  
Steel Truss ◽  
Damage States ◽  
Adaptive Noise ◽  
Truss Bridge

This study aims to investigate the performance of a new damage detection method proposed based on the combination of two signal processing techniques which are complete ensemble empirical mode decomposition with adaptive noise and multiple signal classification (CEEMDAN-MUSIC). The proposed damage detection approach begins with determining the power density spectrum, namely, the pseudospectrum, from the acceleration response of a structure. Then, the CEEMDAN algorithm is used to decompose the vibration signal into a set of intrinsic mode functions (IMFs). Furthermore, the MUSIC algorithm is applied to the first IMF of the processed signal to determine the frequency pseudospectrum, prior to and post the damage states of the structure. The effectiveness of the proposed methodology is experimentally validated using a laboratory-scale model of a steel truss bridge exposed to a white noise excitation. The damage states of the truss bridge are implemented by replacing a specified diagonal element with reduced cross-sectional stiffness. The experimental results demonstrate the superiority of the CEEMDAN-MUSIC method in comparison with the performance of pure MUSIC and traditional frequency domain techniques. The advantages of the proposed technique are also discussed in terms of identifying the presence of the damage, addressing its location, and quantifying the damage levels which are summarized as the damage detection and characterization.

Sign in / Sign up

Export Citation Format

Share Document