scholarly journals Structure–Activity Relationship Study of Mn/Fe Ratio Effects on Mn−Fe−Ce−Ox/γ-Al2O3 Nanocatalyst for NO Oxidation and Fast SCR Reaction

Catalysts ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 642 ◽  
Author(s):  
Yan Gao ◽  
Tao Luan ◽  
Mingyang Zhang ◽  
Wenke Zhang ◽  
Wenchen Feng
Keyword(s):  
Electron Microscopy ◽  
Catalytic Performance ◽  
Structure Activity Relationship ◽  
No Oxidation ◽  
Activity Relationship ◽  
Structure Characteristic ◽  
X Ray ◽  
Structure Activity ◽  
Fast Scr ◽  
Temperature Programmed

A series of Mn−Fe−Ce−Ox/γ-Al2O3 nanocatalysts were synthesized with different Mn/Fe ratios for the catalytic oxidation of NO into NO2 and the catalytic elimination of NOx via fast selective catalytic reduction (SCR) reaction. The effects of Mn/Fe ratio on the physicochemical properties of the samples were analyzed by means of various techniques including N2 adsorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), H2-temperature-programmed reduction (TPR), NH3-temperature-programmed desorption (TPD) and NO-TPD, meanwhile, their catalytic performance was also evaluated and compared. Multiple characterizations revealed that the catalytic performance was highly dependent on the phase composition. The Mn15Fe15−Ce/Al sample with the Mn/Fe molar ratio of 1.0 presented the optimal structure characteristic among all tested samples, with the largest surface area, increased active components distributions, the reduced crystallinity and diminished particle sizes. In the meantime, the ratios of Mn4+/Mnn+, Fe2+/Fen+ and Ce3+/Cen+ in Mn15Fe15−Ce/Al samples were improved, which could enhance the redox capacity and increase the quantity of chemisorbed oxygen and oxygen vacancy, thus facilitating NO oxidation into NO2 and eventually promoting the fast SCR reaction. In accord with the structure results, the Mn15Fe15−Ce/Al sample exhibited the highest NO oxidation rate of 64.2% at 350 °C and the broadest temperature window of 75–350 °C with the NOx conversion >90%. Based on the structure–activity relationship discussion, the catalytic mechanism over the Mn−Fe−Ce ternary components supported by γ-Al2O3 were proposed. Overall, it was believed that the optimization of Mn/Fe ratio in Mn−Fe−Ce/Al nanocatalyst was an extremely effective method to improve the structure–activity relationships for NO pre-oxidation and the fast SCR reaction.

scholarly journals The Effect of Mg and Zn Dopants on Pt/Al2O3 for the Dehydrogenation of Perhydrodibenzyltoluene

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 490
Author(s):  
Rudaviro Garidzirai ◽  
Phillimon Modisha ◽  
Innocent Shuro ◽  
Jacobus Visagie ◽  
Pieter van Helden ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
Flow Reactor ◽  
Plug Flow ◽  
Optical Emission ◽  
Catalytic Performance ◽  
Emission Spectrometry ◽  
Hydrogen Yield ◽  
X Ray ◽  
Temperature Programmed

The effects of Mg and Zn dopants on the catalytic performance of Pt/Al2O3 catalyst were investigated for dehydrogenation of perhydrodibenzyltoluene (H18-DBT) as a liquid organic hydrogen carrier. Al2O3 supports were modified with Mg and Zn to produce Mg-Al2O3 and Zn-Al2O3 with a target loading of 3.8 wt.% for dopants. The modified supports were impregnated with chloroplatinic acid solution to produce the catalysts Pt/Al2O3, Pt/Mg-Al2O3 and Pt/Zn-Al2O3 of 0.5 wt.% Pt loading. Thereafter, the catalysts were characterised using inductively coupled plasma- optical emission spectrometry, scanning electron microscopy-energy dispersive X-ray spectroscopy, hydrogen temperature-programmed reduction, carbon-monoxide pulse chemisorption, ammonia temperature-programmed desorption, X-ray diffraction and transmission electron microscopy. The dehydrogenation experiments were performed using a horizontal plug flow reactor system and the catalyst time-on-stream was 22 h. Pt/Mg-Al2O3 showed the highest average hydrogen flowrate of 29 nL/h, while an average of 27 nL/h was obtained for both Pt/Al2O3 and Pt/Zn-Al2O3. This has resulted in a hydrogen yield of 80% for Pt/Mg-Al2O3, 71% for Pt/Zn-Al2O3 and 73% for Pt/Al2O3. In addition, the conversion of H18-DBT ranges from 99% to 92%, Pt 97–90% and 96–90% for Pt/Mg-Al2O3, Pt/Zn-Al2O3 and Pt/Al2O3, respectively. Following the latter catalyst order, the selectivity to dibenzyltoluene (H0-DBT) ranges from 78% to 57%, 75–51% and 71–45%. Therefore, Pt/Mg-Al2O3 showed improved catalytic performance towards dehydrogenation of H18-DBT.

scholarly journals Effect of Ce doping on the structure–activity relationship of MoVOx composite metal oxides

RSC Advances ◽  
2021 ◽  
Vol 11 (57) ◽  
pp. 36007-36015
Author(s):  
Luyao Deng ◽  
Shuangming Li ◽  
Yongwei Liu ◽  
Zixuan Lu ◽  
Yaoxin Fan ◽  
...  
Keyword(s):  
Metal Oxides ◽  
Benzyl Alcohol ◽  
Selective Oxidation ◽  
Catalytic Performance ◽  
Structure Activity Relationship ◽  
Activity Relationship ◽  
Structure Activity ◽  
Oxidation Of Benzyl Alcohol ◽  
Relationship Of ◽  
Excellent Catalytic Performance

Ce-doped MoVOx with disperse rod-shaped exhibits excellent catalytic performance in selective oxidation of benzyl alcohol.

scholarly journals Catalytic Behavior of Alkali Treated H-MOR in Selective Synthesis of Ethylenediamine via Condensation Amination of Monoethanolamine

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 386
Author(s):  
Feng-Wei Zhao ◽  
Qian Zhang ◽  
Feng Hui ◽  
Jun Yuan ◽  
Su-Ning Mei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Active Sites ◽  
Alkali Treatment ◽  
Catalytic Performance ◽  
Acid Sites ◽  
Selective Synthesis ◽  
Catalytic Behavior ◽  
X Ray ◽  
Bulk Catalyst ◽  
Temperature Programmed

Catalytic behavior of alkali treated mordenite (H-MOR) in selective synthesis of ethylenediamine (EDA) via condensation amination of monoethanolamine (MEA) was investigated. Changes in the structural and acidic properties of alkali treated H-MOR were systematically investigated by N2 adsorption/desorption isotherms, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), temperature programmed ammonia desorption (NH3-TPD), pyridine adsorption was followed by infrared spectroscopy (Py-IR), and X-ray fluorescence (XRF) analyses. The results show that alkali treatment produces more opening mesopores on the H-MOR crystal surfaces and leads to an increase in the number of B acid sites and the strength of the acid sites. The mesopores effectively enhance the rate of diffusion in the bulk catalyst. Moreover, the B acid sites are active sites in selective synthesis of EDA. Due to improvements in the diffusion conditions and reactivities, alkali treated H-MOR shows an excellent catalytic performance under mild reaction conditions. The conversion of MEA was 52.8% and selectivity to EDA increased to 93.6%, which is the highest selectivity achieved so far. Furthermore, possible mechanism for the formation of EDA is discussed.

Sign in / Sign up

Export Citation Format

Share Document