scholarly journals Method for Dynamic Service Orchestration in Fog Computing

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1796
Author(s):  
Nerijus Morkevicius ◽  
Algimantas Venčkauskas ◽  
Nerijus Šatkauskas ◽  
Jevgenijus Toldinas
Keyword(s):  
Fog Computing ◽  
Optimization Method ◽  
Service Orchestration ◽  
Multi Objective ◽  
System A ◽  
Service Distribution ◽  
Judgment Matrix ◽  
Hierarchy Process ◽  
Application Specific ◽  
Constrained Devices

Fog computing is meant to deal with the problems which cloud computing cannot solve alone. As the fog is closer to a user, it can improve some very important QoS characteristics, such as a latency and availability. One of the challenges in the fog architecture is heterogeneous constrained devices and the dynamic nature of the end devices, which requires a dynamic service orchestration to provide an efficient service placement inside the fog nodes. An optimization method is needed to ensure the required level of QoS while requiring minimal resources from fog and end devices, thus ensuring the longest lifecycle of the whole IoT system. A two-stage multi-objective optimization method to find the best placement of services among available fog nodes is presented in this paper. A Pareto set of non-dominated possible service distributions is found using the integer multi-objective particle swarm optimization method. Then, the analytical hierarchy process is used to choose the best service distribution according to the application-specific judgment matrix. An illustrative scenario with experimental results is presented to demonstrate characteristics of the proposed method.

Student Admission Assesment using Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA)

2018 ◽  
Author(s):  
Rivalri Kristianto Hondro ◽  
Mesran Mesran ◽  
Andysah Putera Utama Siahaan
Keyword(s):  
Decision Support ◽  
Decision Support Systems ◽  
Support Systems ◽  
Selection Process ◽  
Initial Step ◽  
Optimization Method ◽  
Ratio Analysis ◽  
Multi Objective Optimization ◽  
Prospective Students ◽  
Multi Objective

Procurement selection process in the acceptance of prospective students is an initial step undertaken by private universities to attract superior students. However, sometimes this selection process is just a procedural process that is commonly done by universities without grouping prospective students from superior students into a class that is superior compared to other classes. To process the selection results can be done using the help of computer systems, known as decision support systems. To produce a better, accurate and objective decision result is used a method that can be applied in decision support systems. Multi-Objective Optimization Method by Ratio Analysis (MOORA) is one of the MADM methods that can perform calculations on the value of criteria of attributes (prospective students) that helps decision makers to produce the right decision in the form of students who enter into the category of prospective students superior.

An evolutionary fuzzy scheduler for multi-objective resource allocation in fog computing

2021 ◽  
Vol 117 ◽  
pp. 498-509
Author(s):  
Chu-ge Wu ◽  
Wei Li ◽  
Ling Wang ◽  
Albert Y. Zomaya
Keyword(s):  
Resource Allocation ◽  
Fog Computing ◽  
Multi Objective

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

scholarly journals A Multi-Objective Optimization Method for Hospital Admission Problem—A Case Study on Covid-19 Patients

Algorithms ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 38
Author(s):  
Amr Mohamed AbdelAziz ◽  
Louai Alarabi ◽  
Saleh Basalamah ◽  
Abdeltawab Hendawi
Keyword(s):  
Medical Care ◽  
Real Life ◽  
Optimization Method ◽  
Multi Objective Optimization ◽  
Admission Process ◽  
Multi Objective ◽  
Admission Time ◽  
King Faisal Specialist Hospital ◽  
Number Of Patients ◽  
Massive Number

The wide spread of Covid-19 has led to infecting a huge number of patients, simultaneously. This resulted in a massive number of requests for medical care, at the same time. During the first wave of Covid-19, many people were not able to get admitted to appropriate hospitals because of the immense number of patients. Admitting patients to suitable hospitals can decrease the in-bed time of patients, which can lead to saving many lives. Also, optimizing the admission process can minimize the waiting time for medical care, which can save the lives of severe cases. The admission process needs to consider two main criteria: the admission time and the readiness of the hospital that will accept the patients. These two objectives convert the admission problem into a Multi-Objective Problem (MOP). Pareto Optimization (PO) is a common multi-objective optimization method that has been applied to different MOPs and showed its ability to solve them. In this paper, a PO-based algorithm is proposed to deal with admitting Covid-19 patients to hospitals. The method uses PO to vary among hospitals to choose the most suitable hospital for the patient with the least admission time. The method also considers patients with severe cases by admitting them to hospitals with the least admission time regardless of their readiness. The method has been tested over a real-life dataset that consisted of 254 patients obtained from King Faisal specialist hospital in Saudi Arabia. The method was compared with the lexicographic multi-objective optimization method regarding admission time and accuracy. The proposed method showed its superiority over the lexicographic method regarding the two criteria, which makes it a good candidate for real-life admission systems.

scholarly journals A Two-Stage Mono- and Multi-Objective Method for the Optimization of General UPS Parallel Manipulators

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Alejandra Ríos ◽  
Eusebio E. Hernández ◽  
S. Ivvan Valdez
Keyword(s):  
Genetic Algorithm ◽  
Performance Metrics ◽  
Tracking Error ◽  
Parallel Manipulators ◽  
Optimization Method ◽  
Statistical Hypothesis ◽  
Two Stage ◽  
Multi Objective ◽  
Second Stage ◽  
Conflicting Objectives

This paper introduces a two-stage method based on bio-inspired algorithms for the design optimization of a class of general Stewart platforms. The first stage performs a mono-objective optimization in order to reach, with sufficient dexterity, a regular target workspace while minimizing the elements’ lengths. For this optimization problem, we compare three bio-inspired algorithms: the Genetic Algorithm (GA), the Particle Swarm Optimization (PSO), and the Boltzman Univariate Marginal Distribution Algorithm (BUMDA). The second stage looks for the most suitable gains of a Proportional Integral Derivative (PID) control via the minimization of two conflicting objectives: one based on energy consumption and the tracking error of a target trajectory. To this effect, we compare two multi-objective algorithms: the Multiobjective Evolutionary Algorithm based on Decomposition (MOEA/D) and Non-dominated Sorting Genetic Algorithm-III (NSGA-III). The main contributions lie in the optimization model, the proposal of a two-stage optimization method, and the findings of the performance of different bio-inspired algorithms for each stage. Furthermore, we show optimized designs delivered by the proposed method and provide directions for the best-performing algorithms through performance metrics and statistical hypothesis tests.

Sign in / Sign up

Export Citation Format

Share Document