scholarly journals Harmonic Distortion Prediction Model of a Grid-Tie Photovoltaic Inverter Using an Artificial Neural Network

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 790 ◽  
Author(s):  
Matej Žnidarec ◽  
Zvonimir Klaić ◽  
Damir Šljivac ◽  
Boris Dumnić
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Power Quality ◽  
Prediction Models ◽  
Harmonic Distortion ◽  
Pv System ◽  
Current Harmonics ◽  
Pv Systems ◽  
Input Parameters ◽  
Artificial Neural

Expanding the number of photovoltaic (PV) systems integrated into a grid raises many concerns regarding protection, system safety, and power quality. In order to monitor the effects of the current harmonics generated by PV systems, this paper presents long-term current harmonic distortion prediction models. The proposed models use a multilayer perceptron neural network, a type of artificial neural network (ANN), with input parameters that are easy to measure in order to predict current harmonics. The models were trained with one-year worth of measurements of power quality at the point of common coupling of the PV system with the distribution network and the meteorological parameters measured at the test site. A total of six different models were developed, tested, and validated regarding a number of hidden layers and input parameters. The results show that the model with three input parameters and two hidden layers generates the best prediction performance.

Artificial Neural Network based SVPWM for Five Level Cascaded H-bridge Inverter fed Grid connected PV System

2020 ◽  
Vol 39 (6) ◽  
pp. 8453-8462
Author(s):  
R. Palanisamy ◽  
K. Mohana Sundram ◽  
K. Selvakumar ◽  
C.S. Boopathi ◽  
D. Selvabharathi ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Pulse Width Modulation ◽  
Switching Time ◽  
Harmonic Distortion ◽  
Output Current ◽  
Pv System ◽  
Non Linear Systems ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

An Artificial Neural Network (ANN) based Space Vector Pulse Width Modulation (SVPWM) for five level cascaded H-bridge inverter (CHBI) fed grid connected photovoltaic (PV) system. The multilevel inverter topologies are offers better performance compare conventional two level inverter like reduced total harmonic distortion, less electromagnetic interferences and voltage stresses across switches are low. The ANN based SVPWM generates the switching pulses for cascaded H-bridge inverter; it improves the accuracy in reference vectors tuning and identification, which leads to improve the inverter output voltage, better utilization of dc-link voltage and controlled output current. The ANN control makes the implementation of SVPWM becomes simple and minimizes the intricacy in tracking reference vector and calculation of switching time; it is suitable for any type of non-linear systems. This proposed system is energized using PV system and it is boosted using dc-dc boost converter, and the output of CHBI is synchronized with grid connected system using coupled inductor. The simulation and experimental results of ANN based SVPWM for CHBI is verified using simulink-matlab and DSP processor.

scholarly journals Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization-Based Artificial Neural Network (BRANN)

2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Nagoor Basha Shaik ◽  
Kedar Mallik Mantrala ◽  
Balaji Bakthavatchalam ◽  
Qandeel Fatima Gillani ◽  
M. Faisal Rehman ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Corrosion Rate ◽  
Prediction Models ◽  
Test Time ◽  
Bayesian Regularization ◽  
Cobalt Chromium ◽  
Corrosion Properties ◽  
Cocrmo Alloy ◽  
Artificial Neural

AbstractThe well-known fact of metallurgy is that the lifetime of a metal structure depends on the material's corrosion rate. Therefore, applying an appropriate prediction of corrosion process for the manufactured metals or alloys trigger an extended life of the product. At present, the current prediction models for additive manufactured alloys are either complicated or built on a restricted basis towards corrosion depletion. This paper presents a novel approach to estimate the corrosion rate and corrosion potential prediction by considering significant major parameters such as solution time, aging time, aging temperature, and corrosion test time. The Laser Engineered Net Shaping (LENS), which is an additive manufacturing process used in the manufacturing of health care equipment, was investigated in the present research. All the accumulated information used to manufacture the LENS-based Cobalt-Chromium-Molybdenum (CoCrMo) alloy was considered from previous literature. They enabled to create a robust Bayesian Regularization (BR)-based Artificial Neural Network (ANN) in order to predict with accuracy the material best corrosion properties. The achieved data were validated by investigating its experimental behavior. It was found a very good agreement between the predicted values generated with the BRANN model and experimental values. The robustness of the proposed approach allows to implement the manufactured materials successfully in the biomedical implants.

Artificial Neural Network Model of Discharge Lamps in the Power Quality Context

2013 ◽  
Vol 24 (3) ◽  
pp. 272-285 ◽  
Author(s):  
André Luiz Andreoli ◽  
Denis Vinicius Coury ◽  
Mario Oleskovicz ◽  
Paulo José Amaral Serni
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Power Quality ◽  
Network Model ◽  
Neural Network Model ◽  
Artificial Neural Network Model ◽  
Artificial Neural

scholarly journals An artificial neural network model for predicting characteristic input parameters for physics based modelling of drying process

2019 ◽  
Author(s):  
Ankita Sinha ◽  
Atul Bhargav
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Network Model ◽  
Neural Network Model ◽  
Artificial Neural Network Model ◽  
Estimation Methods ◽  
Drying Process ◽  
Many Instruments ◽  
Input Parameters ◽  
Artificial Neural

Drying is crucial in the quality preservation of food materials. Physics-based models are effective tools to optimally control the drying process. However, these models require accurate thermo-physical properties; unavailability or uncertainty in the values of these properties increases the possibility of error. Property estimation methods are not standardized, and usually involve the use of many instruments and are time-consuming. In this work, we have developed an experimentally validated deep learning-based artificial neural network model that estimates sensitive input parameters of food materials using temperature and moisture data from a set of simple experiments. This model predicts input parameters with error less than 1%. Further, using input parameters, physics-based model predicts temperature and moisture to within 5% accuracy of experiments. The proposed work when interfaced with food machinery could play a significant role in process optimization in food processing industries.

scholarly journals A Simple and Sustainable Prediction Method of Liquefaction-Induced Settlement at Pohang Using an Artificial Neural Network

2020 ◽  
Vol 12 (10) ◽  
pp. 4001
Author(s):  
Sung-Sik Park ◽  
Peter D. Ogunjinmi ◽  
Seung-Wook Woo ◽  
Dong-Eun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Predictive Model ◽  
Model Equation ◽  
Soil Layer ◽  
Unit Weight ◽  
Ann Model ◽  
Matrix Formulation ◽  
Input Parameters ◽  
Artificial Neural

Conventionally, liquefaction-induced settlements have been predicted through numerical or analytical methods. In this study, a machine learning approach for predicting the liquefaction-induced settlement at Pohang was investigated. In particular, we examined the potential of an artificial neural network (ANN) algorithm to predict the earthquake-induced settlement at Pohang on the basis of standard penetration test (SPT) data. The performance of two ANN models for settlement prediction was studied and compared in terms of the R2 correlation. Model 1 (input parameters: unit weight, corrected SPT blow count, and cyclic stress ratio (CSR)) showed higher prediction accuracy than model 2 (input parameters: depth of the soil layer, corrected SPT blow count, and the CSR), and the difference in the R2 correlation between the models was about 0.12. Subsequently, an optimal ANN model was used to develop a simple predictive model equation, which was implemented using a matrix formulation. Finally, the liquefaction-induced settlement chart based on the predictive model equation was proposed, and the applicability of the chart was verified by comparing it with the interferometric synthetic aperture radar (InSAR) image.

Sign in / Sign up

Export Citation Format

Share Document