scholarly journals Steady-State Power Flow Analysis of Cold-Thermal-Electric Integrated Energy System Based on Unified Power Flow Model

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4455
Author(s):  
Qu ◽  
Ouyang ◽  
Yuan ◽  
Zeng

The integrated energy system includes various energy forms, complex operation modes and tight coupling links, which bring challenges to its steady-state modeling and steady-state power flow calculation. In order to study the steady-state characteristics of the integrated energy system, the topological structure of the cold-thermal-electric integrated energy system is given firstly. Then, the steady-state model of the power subsystem, the thermal subsystem, the cold subsystem and the distributed energy station are established, the unified power flow model is established, and the Newton Raphson algorithm is used to solve the unified power flow model. Finally, the influence of the key technical parameters on the steady-state power flow of the integrated energy system is analyzed. Research results show that the photovoltaic power generation plays a supporting role in the voltage of each bus; with the increase of electric load power, the unit value of bus voltage decreases continuously; the water supply temperature of the source node has a greater impact on the steady-state flow in the pipeline and the water supply temperature of each node; the pipeline length of the heat network has a greater impact on the end temperature of the pipeline, the water supply temperature, and the return water temperature of each node. The analysis results can support the planning, design, and optimal operation of the integrated energy system.

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2765 ◽  
Author(s):  
Yongjie Zhong ◽  
Dongliang Xie ◽  
Suwei Zhai ◽  
Yonghui Sun

The integrated energy system (IES) has the characteristic of energy system integrated/multi-energy coupling that involves heat, cooling, electricity, natural gas, and various other energy forms, which can maximize the synergistic effects and complementary benefits among various energy forms and their comprehensive utilization. In this paper, based on energy hub (EH), the day-ahead hierarchical steady state optimal operation for IES is discussed, in which the coupling natural gas system, electricity transmission system, and district heating system are all considered. Firstly, the model architecture of EH with diverse storage devices, renewable energy, and different energy conversion equipment is proposed and the steady state mathematical model of different energy networks in IES is developed, respectively. Secondly, the day-ahead operating cost of EH is minimized by an optimizing strategy to maximize the benefits of all kinds of energy demand users, where different types of energy power input into EH can be obtained. Then, the day-ahead optimal operation mode for IES considering minimization of operating fuel cost index is proposed via an energy management system, which provides various energy power data that are uploaded from EH. Finally, numerical results are presented to verify the effectiveness and usefulness of the day-ahead hierarchical optimal operation and steady state calculation analysis for IES, which could further illustrate that the proposed optimal operation can meet the requirements of practical engineering applications.


2018 ◽  
Vol 9 (5) ◽  
pp. 4828-4837 ◽  
Author(s):  
Jianqiang Miao ◽  
Ning Zhang ◽  
Chongqing Kang ◽  
Jianxiao Wang ◽  
Yi Wang ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 600
Author(s):  
Bin Ouyang ◽  
Lu Qu ◽  
Qiyang Liu ◽  
Baoye Tian ◽  
Zhichang Yuan ◽  
...  

Due to the coupling of different energy systems, optimization of different energy complementarities, and the realization of the highest overall energy utilization rate and environmental friendliness of the energy system, distributed energy system has become an important way to build a clean and low-carbon energy system. However, the complex topological structure of the system and too many coupling devices bring more uncertain factors to the system which the calculation of the interval power flow of distributed energy system becomes the key problem to be solved urgently. Affine power flow calculation is considered as an important solution to solve uncertain steady power flow problems. In this paper, the distributed energy system coupled with cold, heat, and electricity is taken as the research object, the influence of different uncertain factors such as photovoltaic and wind power output is comprehensively considered, and affine algorithm is adopted to calculate the system power flow of the distributed energy system under high and low load conditions. The results show that the system has larger operating space, more stable bus voltage and more flexible pipeline flow under low load condition than under high load condition. The calculation results of the interval power flow of distributed energy systems can provide theoretical basis and data support for the stability analysis and optimal operation of distributed energy systems.


Sign in / Sign up

Export Citation Format

Share Document